Jump to content

pbsv.cfg for Server Admins Universal


BestNoob

Recommended Posts

Server PunkBuster Config for Call of Duty, Battlefield etc.

This Config should give you the best protection for your Server.
Get latest version of the pbsv.cfg on my GitHub: https://github.com/BestNoob/pbsv.cfg

Im actually working on new servers - You can checkout my Serverlist on Discord: https://discord.gg/A7vtjmw

This is just a preview, maybe outdated in the future - so check the GitHub for latest version:

;   Auto Generated by PunkBuster Server
;   Some of the following settings may not apply,
;   consult manuals at evenbalance.com for full documentation
;   This Configuration file was created by BestNoob - please credit - when you share it
;////////////////INSTRUCTIONS////////////////
;remove or add the semicolon in front of a line to activate/deactivate this option
;register a account and your server on www.pbbans.com and www.anticheatinc.net to use their streaming service to protect your server
;only for BF4 there is a plugin you can use with Procon from https://myrcon.net , get BF4DB Plugin from www.bf4db.com/plugin .You also have to register your server there
;You can also use a offline banlist, enable it with this line pb_sv_banload pb\bc2.dat 
;If you have not used it before the mighty MD5 Tool from here evenbalance.com/downloads.php place the file inside the PB server folder
;You can always get the latest version of this file here from my GitHub https://github.com/BestNoob/pbsv.cfg
;maybe GGCStream comes back, so ill leave those lines here, just deactivated it
;////////////////INSTRUCTIONS////////////////
pb_sv_update

;Clears current config. If using ACI, GGC, PBBans - add their config to the end
pb_sv_TaskEmpty
pb_sv_NameLockEmpty
pb_sv_md5toolempty
pb_sv_cvarempty
pb_sv_banempty
pb_sv_uconempty

pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Server)]
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]
pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)]
pb_sv_KickLen 3 //[Minutes (default=2)]
pb_sv_CvarFreq 3 //[# of range checks per minute]
pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 2 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]Default = 99 higher value = less checking, 99=disabled]
pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes) 10-90 higher value = less checking, 99=disabled Default = 99]
pb_sv_CQC 0 //[0=No, 1=Yes (default=1)] //[Change to 1 if you don't want outside programs to read server variables]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 1000 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots, working variables are 320,400,800,960]
pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots, working variables are 240,204,408,540]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots, working variables are 50,90,99]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots, working variables are 50,90,99]
pb_sv_SsSrate 1 //[Sample Rate for remote screenshots.Variables are 1, 2 and 4. Use 2 for 800x408 and 4 for 960x540]
pb_sv_SsDelay 3 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 210 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 660 //[Max # of seconds to wait before requesting next ss]
;////////////////WARNING////////////////
pb_sv_AutoSs 1 //[Warning! High security risk! Disable all SS capture for older games. 0=No, 1=Yes (default=0)]
;Only enable this for following games: game pg "America's Army: Proving Grounds", game bf3 "Battlefield 3", game bf4 "Battlefield 4", game bfh "Battlefield Hardline", game bc2 "Battlefield Bad Company 2", 
;game fc3 "Far Cry 3", game grfs "Ghost Recon Future Soldier", game moh "Medal of Honor", game wf "Medal of Honor Warfighter", game hos "Red Orchestra 2: Heroes of Stalingrad"
;////////////////WARNING////////////////
pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 300 //[Seconds]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_HttpPort 0 //[Port #]
pb_sv_HttpAddr "" //[External IP Address]
pb_sv_HttpRefresh 30 //[Seconds]
pb_sv_HttpKey "" //[Key]
pb_sv_HttpMaps "" //[Map list (separate by spaces)]
pb_sv_ScoreKick 0 //[Min score (negative)]
pb_sv_ChangePeriod 600 //[Seconds]
pb_sv_ChangeMax 3 //[Max name changes allowed in ChangePeriod means X changes in XXX seconds]
pb_sv_DupNameGrace 0 //[Seconds]
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 0 //[0=kick4all, 1=UNKNGUIDS, 2=WRONGIP, 3=WRONGIP#UNKNGUIDS, 4=DUPGUIDS, 5=UNKN#DUPGUIDS, 6=WRONGIP#DUPGDS, 7=NOKICK (1-7 = NO kick for)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]
pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 3 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 20 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_UpdateGrace 1200 //[Seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 10 //[Seconds to wait before No GUID kick]
pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
pb_sv_load pbsvlog.cfg //[load remote logging settings (if pbsvlog.cfg exists)]
pb_sv_load pbsvuser.cfg																			   			   

;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]
;pb_sv_badname 10 Aimbutt		
;pb_sv_badname 10 Aimbut		
;pb_sv_badname 10 Aimbud
;pb_sv_badname 10 Aimbudd				

;MD5 Tool Settings
pb_sv_md5toolfreq 50 //[Reducing this will increase the scan frequency that can cause lag and also increases the chances being kicked for Ignoring MD5 Tool Queries.]

;PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command])
pb_sv_task 0 7200 pb_sv_ver //Keep-Alive for PBBans Hub (Do not remove. Will cause servers to appear as inactive when empty for long periods of time)
pb_sv_task 0 86400 pb_sv_update //Check for PB updates daily (More dependable than UCON system)
pb_sv_task 0 600 pb_sv_guidrelax 0 //keeps the server from setting it to 7

;Messages
;pb_sv_task 3 480 say -ACI- LiveSecure BF4 PB Scripts v07.01.2017
;pb_sv_task 90 -1 say STRACILIVSEC

;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
pb_sv_cvar clanName exclude ^
pb_sv_cvar clanName exclude ^^
pb_sv_cvar name exclude ^
pb_sv_cvar name exclude ^^							 					  

;Load Ban List
pb_sv_banload
;pb_sv_banload pb\bc2.dat //[you can name the banlist as you want, but it has to be placed inside the PB folder]

;Protected Tags Optional
pb_sv_ProtectTag 1 GGC	
pb_sv_protecttag 1 PBBans
pb_sv_protecttag 1 PBSTAFF						  
pb_sv_ProtectTag 1 ACI
pb_sv_ProtectTag 1 BF4DB

;Stream to ACI //You have to register on their website to use their service
pb_sv_logaddr "69.39.237.211"
pb_sv_logport 13850 //[13750,13373,18050,12555,13850,13650,12600]
pb_sv_loguser "BF4ACI" //[AAPGACI,AA3ACI,BC2ACI,BF3ACI,BF4ACI,BFHACI,MOHWACI]
pb_sv_ver

;PB UCON Settings //remember for PBBans and ACI Streaming Service you have to register on their website
pb_sv_usessionlimit 10
pb_sv_ucontimeout 300		  
pb_sv_uconmaxsendrate 16
pb_sv_uconadd 1 "69.39.237.211" "aci" "livesecure"
;pb_sv_uconadd 1 "31.214.160.253" "ggc" "bf4" //(maybe GGCStream comes back)[aa4,bf2,bf3,bf4,bc2,bfhard,cod2,cod4,coduo,codww,et,moh,mohw,ro2]
pb_sv_uconadd 1 "66.55.152.232" "pbbhub3-1" "pbbanshub"
pb_sv_uconadd 1 "66.55.152.233" "pbbhub3-2" "pbbanshub"
pb_sv_uconadd 1 "66.55.152.234" "pbbhub3-3" "pbbanshub"
pb_sv_uconignoreempty
pb_sv_uconignore empty
pb_sv_uconignore admin.shutdown
pb_sv_uconignore pb_sv_md5toolfreq
pb_sv_uconignore pb_sv_guidrelax
pb_sv_uconignore quit
pb_sv_uconignore exit //[only working for BF2,BF2142 (check this by writing exit in server console)]

 

Edited by BestNoob
found some mistakes and added myrcon.net to the file

Im still searching for a SPONSOR for hosting BF3, BF4 and more servers.

My Server Project on Discord: https://discord.gg/A7vtjmw

Universal PB - PunkBuster config for Server Admins https://github.com/BestNoob/pbsv.cfg

Steam: https://steamcommunity.com/id/BestNoob/

Link to comment
Share on other sites

  • 6 months later...

Update Info: At August 2024 PBBans HUB has changed to:

  • pb_sv_uconadd 1 "38.111.114.231" "pbbhub4-1" "pbbanshub"
  • pb_sv_uconadd 1 "38.111.114.249" "pbbhub4-2" "pbbanshub"

Im still searching for a SPONSOR for hosting BF3, BF4 and more servers.

My Server Project on Discord: https://discord.gg/A7vtjmw

Universal PB - PunkBuster config for Server Admins https://github.com/BestNoob/pbsv.cfg

Steam: https://steamcommunity.com/id/BestNoob/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Our picks

    • Game Server Hosting:

      We're happy to announce that EZRCON will branch out into the game server provider scene. This is a big step for us so please having patience if something doesn't go right in this area. Now, what makes us different compared to other providers? Well, we're going with the idea of having a scaleable server hosting and providing more control in how you set up your server. For example, in Minecraft, you have the ability to control how many CPU cores you wish your server to have access to, how much RAM you want to use, how much disk space you want to use. This type of control can't be offered in a single service package so you're able to configure a custom package the way you want it.

      You can see all the available games here. Currently, we have the following games available.

      Valheim (From $1.50 USD)


      Rust (From $3.20 USD)


      Minecraft (Basic) (From $4.00 USD)


      Call of Duty 4X (From $7.00 USD)


      OpenTTD (From $4.00 USD)


      Squad (From $9.00 USD)


      Insurgency: Sandstorm (From $6.40 USD)


      Changes to US-East:

      Starting in January 2022, we will be moving to a different provider that has better support, better infrastructure, and better connectivity. We've noticed that the connection/routes to this location are not ideal and it's been hard getting support to correct this. Our contract for our two servers ends in March/April respectively. If you currently have servers in this location you will be migrated over to the new provider. We'll have more details when the time comes closer to January. The new location for this change will be based out of Atlanta, GA. If you have any questions/concerns please open a ticket and we'll do our best to answer them.
      • 5 replies
    • Hello All,

      I wanted to give an update to how EZRCON is doing. As of today we have 56 active customers using the services offered. I'm glad its doing so well and it hasn't been 1 year yet. To those that have services with EZRCON, I hope the service is doing well and if not please let us know so that we can improve it where possible. We've done quite a few changes behind the scenes to improve the performance hopefully. 

      We'll be launching a new location for hosting procon layers in either Los Angeles, USA or Chicago, IL. Still being decided on where the placement should be but these two locations are not set in stone yet. We would like to get feedback on where we should have a new location for hosting the Procon Layers, which you can do by replying to this topic. A poll will be created where people can vote on which location they would like to see.

      We're also looking for some suggestions on what else you would like to see for hosting provider options. So please let us know your thoughts on this matter.
      • 4 replies
    • Added ability to disable the new API check for player country info


      Updated GeoIP database file


      Removed usage sending stats


      Added EZRCON ad banner



      If you are upgrading then you may need to add these two lines to your existing installation in the file procon.cfg. To enable these options just change False to True.

      procon.private.options.UseGeoIpFileOnly False
      procon.private.options.BlockRssFeedNews False



       
      • 2 replies
    • I wanted I let you know that I am starting to build out the foundation for the hosting services that I talked about here. The pricing model I was originally going for wasn't going to be suitable for how I want to build it. So instead I decided to offer each service as it's own product instead of a package deal. In the future, hopefully, I will be able to do this and offer discounts to those that choose it.

      Here is how the pricing is laid out for each service as well as information about each. This is as of 7/12/2020.

      Single MySQL database (up to 30 GB) is $10 USD per month.



      If you go over the 30 GB usage for the database then each additional gigabyte is charged at $0.10 USD each billing cycle. If you're under 30GB you don't need to worry about this.


      Databases are replicated across 3 zones (regions) for redundancy. One (1) on the east coast of the USA, One (1) in Frankfurt, and One (1) in Singapore. Depending on the demand, this would grow to more regions.


      Databases will also be backed up daily and retained for 7 days.




      Procon Layer will be $2 USD per month.


      Each layer will only allow one (1) game server connection. The reason behind this is for performance.


      Each layer will also come with all available plugins installed by default. This is to help facilitate faster deployments and get you up and running quickly.


      Each layer will automatically restart if Procon crashes. 


      Each layer will also automatically restart daily at midnight to make sure it stays in tip-top shape.


      Custom plugins can be installed by submitting a support ticket.




      Battlefield Admin Control Panel (BFACP) will be $5 USD per month


      As I am still working on building version 3 of the software, I will be installing the last version I did. Once I complete version 3 it will automatically be upgraded for you.





      All these services will be managed by me so you don't have to worry about the technical side of things to get up and going.

      If you would like to see how much it would cost for the services, I made a calculator that you can use. It can be found here https://ezrcon.com/calculator.html

       
      • 11 replies
    • I have pushed out a new minor release which updates the geodata pull (flags in the playerlisting). This should be way more accurate now. As always, please let me know if any problems show up.

       
      • 9 replies
×
×
  • Create New...

Important Information

Please review our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.