Jump to content

Table of starting ticket counts vs. vars.gameModeCounter


ImportBot

Recommended Posts

  • Replies 60
  • Created
  • Last Reply
  • 1 month later...

Originally Posted by Singh400*:

 

Will this be updated for R-34? If so, thanks in advance! :ohmy:

The spreadsheet has been .

 

Changelog:-

  • Added Aftermath Maps
  • Added Aftermath New Mode
  • Note: That Talah Market on CQL has been left out on purpose. Conflicting information.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by Singh400*:

 

The spreadsheet has been .

 

Changelog:-

  • Added Aftermath Maps
  • Added Aftermath New Mode
  • Note: That Talah Market on CQL has been left out on purpose. Conflicting information.
again. Changed the layout, one spreadsheet was getting cumbersome to manage. Each DLC now has it's own tab along the bottom. And to change values you do so on the first tab. The values will auto-update across all sheets.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by Singh400*:

 

Thank you, sir. Yeah, I had someone tell me that Talah Market used ConquestAssaultLarge0 and ConquestAssaultSmall0 game modes.

again. This time to include ConquestAssaultLarge0 and ConquestAssaultSmall0 for Talah Market.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by PapaCharlie9*:

 

Is the spreadsheet complete now? I want to wait until we have all the data before I update the table in post #1, since it is a pain to do.

 

EDIT: Whoops, it's missing TeamDeathMatchC0, which I know is supported because I'm running it. :smile:

 

Regular TDM is also supported. It's the only map set that supports both so far.

* Restored post. It could be that the author is no longer active.
Link to comment
  • 2 weeks later...

Originally Posted by Singh400*:

 

Is the spreadsheet complete now? I want to wait until we have all the data before I update the table in post #1, since it is a pain to do.

 

EDIT: Whoops, it's missing TeamDeathMatchC0, which I know is supported because I'm running it. :smile:

 

Regular TDM is also supported. It's the only map set that supports both so far.

Eurgh, the documentation for the last server release was horrendous. It didn't include all the modes that were support! :@
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by PapaCharlie9*:

 

Eurgh, the documentation for the last server release was horrendous. It didn't include all the modes that were support! :@

Yeah, I know. Phil_K found an error in the docs when he tried a combination that is supposed to be legal, but isn't.
* Restored post. It could be that the author is no longer active.
Link to comment
  • 3 weeks later...

Originally Posted by TheDoctor*:

 

https://docs.google.com/spreadsheet/...Xc1WlN1Ti1oZHc

 

Have fun! :ohmy:

 

Changelog:-

- Added CQ DLC maps and modes

- Fix a small error in calculating SQDM tickets

- Made the sheet public, but only one cell is now changeable, meaning no anon's can mess with the formulas

- Some of the ticket counts are wrong in the original table (maybe they changed in recent Rxx updates_). Anyway the sheet is correct in terms of default ticket counts.

This is awesome. THANK YOU!
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by Singh400*:

 

That reminds me, should I update the table in post #1 now? Is the spreadsheet as final as it is going to get?

Pretty much mate, can't really spend time on find out what Dice did and didn't include in the server documentation. I'll just wait for the next Rxx rollout.
* Restored post. It could be that the author is no longer active.
Link to comment
  • 3 weeks later...

Originally Posted by TimSad*:

 

I just went through every map on every game mode. It looks like when scoping out all the Aftermath maps, someone had vars.gameModeCounter set to something other than 100? Because all of those values are off for the Aftermath maps. I also found other random ones to be off. Also, Noshahr Canals map numbers are messed up in that list and aren't all the same. And I found a couple more game modes that are actually compatible with other maps such as TeamDeathMatchC0 which is actually compatible with all of the maps and Gun Master is not only compatible with Close Quarters maps but Aftermath maps as well.

 

I've completely update my CSV file that my webpage uses with all the correct info and values. I'll attach it here if you'd like to use it. Also, would you like to put a link to that webpage on your original post of this thread? :smile:http://soldiersofchaosgaming.com/bf3_tickets.php

 

Attached Files:

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by PapaCharlie9*:

 

I just went through every map on every game mode. It looks like when scoping out all the Aftermath maps, someone had vars.gameModeCounter set to something other than 100? Because all of those values are off for the Aftermath maps. I also found other random ones to be off. Also, Noshahr Canals map numbers are messed up in that list and aren't all the same. And I found a couple more game modes that are actually compatible with other maps such as TeamDeathMatchC0 which is actually compatible with all of the maps and Gun Master is not only compatible with Close Quarters maps but Aftermath maps as well.

 

I've completely update my CSV file that my webpage uses with all the correct info and values. I'll attach it here if you'd like to use it. Also, would you like to put a link to that webpage on your original post of this thread? :smile:http://soldiersofchaosgaming.com/bf3_tickets.php

Sure.

 

Were you comparing only to the table in post #1, or to Singh's online spreadsheet as well? We're trying to treat the online spreadsheet as the master and everything else is just a convenience copy. There are likely transcription errors from the online spreadsheet to the table.

 

If there is no actual difference between TeamDeathMatchC0 and TeamDeathMatch for any map other than CQ, I'll just add a note that they are the same.

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by TimSad*:

 

Sure.

 

Were you comparing only to the table in post #1, or to Singh's online spreadsheet as well? We're trying to treat the online spreadsheet as the master and everything else is just a convenience copy. There are likely transcription errors from the online spreadsheet to the table.

 

If there is no actual difference between TeamDeathMatchC0 and TeamDeathMatch for any map other than CQ, I'll just add a note that they are the same.

Yeah, I think I was just looking at the table you have there. Yeah, definitely no ticket difference. I'm wondering if there is a boundary difference in game, though. Up until last night when I reviewed every single map on every single mode, I had no idea that TDM Close Quarters was available on every map aside from CQ maps. I also didn't know they supported Gun Master for the new Aftermath maps.
* Restored post. It could be that the author is no longer active.
Link to comment
  • 1 month later...

Originally Posted by IAF-SDS*:

 

Hey guys.

 

I just went thru every map and game mode on End Game and I have the default tickets shown below:

 

 

 

DEFAULT TICKETS FOR END GAME

 

 

XP5_001 ConquestLarge0 1 --- 200

XP5_002 ConquestLarge0 1 --- 200

XP5_003 ConquestLarge0 1 --- 300

XP5_004 ConquestLarge0 1 --- 300

 

XP5_001 ConquestSmall0 1 --- 200

XP5_002 ConquestSmall0 1 --- 200

XP5_003 ConquestSmall0 1 --- 200

XP5_004 ConquestSmall0 1 --- 200

 

XP5_001 RushLarge0 1 --- 75 attackers

XP5_002 RushLarge0 1 --- 75 attackers

XP5_003 RushLarge0 1 --- 75 attackers

XP5_004 RushLarge0 1 --- 75 attackers

 

XP5_001 SquadRush0 1 --- 20 attackers

XP5_002 SquadRush0 1 --- 20 attackers

XP5_003 SquadRush0 1 --- 20 attackers

XP5_004 SquadRush0 1 --- 20 attackers

 

XP5_001 SquadDeathMatch0 1 --- 50

XP5_002 SquadDeathMatch0 1 --- 50

XP5_003 SquadDeathMatch0 1 --- 50

XP5_004 SquadDeathMatch0 1 --- 50

 

XP5_001 TeamDeathMatch0 1 --- 100

XP5_002 TeamDeathMatch0 1 --- 100

XP5_003 TeamDeathMatch0 1 --- 100

XP5_004 TeamDeathMatch0 1 --- 100

 

XP5_001 TeamDeathMatchC0 1 --- 100

XP5_002 TeamDeathMatchC0 1 --- 100

XP5_003 TeamDeathMatchC0 1 --- 100

XP5_004 TeamDeathMatchC0 1 --- 100

 

XP5_001 CaptureTheFlag0 1 --- 3 flags

XP5_002 CaptureTheFlag0 1 --- 3 flags

XP5_003 CaptureTheFlag0 1 --- 3 flags

XP5_004 CaptureTheFlag0 1 --- 3 flags

 

XP5_001 AirSuperiority0 1 --- 250

XP5_002 AirSuperiority0 1 --- 250

XP5_003 AirSuperiority0 1 --- 250

XP5_004 AirSuperiority0 1 --- 250

 

 

 

 

Edit: Updated to correct SquadDeathMatch0 and SquadRush0.

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by TimSad*:

 

Thanks for that, IAF! Also, I think that the CTF time limit should be added somewhere here. By default with vars.ctfRoundTimeModifier set to 100, I believe the time limit will be 20 minutes. We'll finally be able to see in a few more hours here. The question is: Do we make a new cell for that variable/value?

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by IAF-SDS*:

 

Falcon thinks the 187 for SquadDeathMatch0 might be wrong.

 

I double checked this number in battlelog because it looked wrong to me too, but it came back at 187.

 

Let me know please if for some reason battlelog is showing that or any other number wrong so I may update my post above.

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by PapaCharlie9*:

 

Falcon thinks the 187 for SquadDeathMatch0 might be wrong.

 

I double checked this number in battlelog because it looked wrong to me too, but it came back at 187.

 

Let me know please if for some reason battlelog is showing that or any other number wrong so I may update my post above.

I just did a check on XP5_004 and it was 50.

 

What's your methodology? I use Procon to add the map to map list, run that map, and then look at serverInfo.

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by IAF-SDS*:

 

I just did a check on XP5_004 and it was 50.

 

What's your methodology? I use Procon to add the map to map list, run that map, and then look at serverInfo.

I used Procon to add the map to map list, ran that map and game mode, and then refreshed battlelog to give me the numbers.

 

I've caught battlelog give me a bad number only once, but looks like it did it to me again.

 

Sorry about that. I hope the rest are okay.

 

 

 

I updated it above to 50 for SquadDeathMatch0.

 

Does everything else look good?

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by Singh400*:

 

Are these numbers final now? Waiting for Singh to update the spreadsheet then I'll update post #1.

Don't know when I'll have time to sit down and update the spreadsheet fella. It's on the list to do, but it's pretty low priority at the moment.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by PapaCharlie9*:

 

Don't know when I'll have time to sit down and update the spreadsheet fella. It's on the list to do, but it's pretty low priority at the moment.

Sorry, didn't mean for that to sound like a demand. Just meant to describe the sequence of events. It's not like I got tons of free time either. :smile:
* Restored post. It could be that the author is no longer active.
Link to comment
  • 3 weeks later...

Originally Posted by EXTREMAL4G*:

 

Hi there Mix server naturally with different maps and modes. Question how to set a certain number of tickets of each mode or map in server / ... / Startup.txt?

* Restored post. It could be that the author is no longer active.
Link to comment
  • 4 weeks later...

Originally Posted by PapaCharlie9*:

 

Hi there Mix server naturally with different maps and modes. Question how to set a certain number of tickets of each mode or map in server / ... / Startup.txt?

Use the Ultimate Map Manager plugin.
* Restored post. It could be that the author is no longer active.
Link to comment

Archived

This topic is now archived and is closed to further replies.




  • Our picks

    • Game Server Hosting:

      We're happy to announce that EZRCON will branch out into the game server provider scene. This is a big step for us so please having patience if something doesn't go right in this area. Now, what makes us different compared to other providers? Well, we're going with the idea of having a scaleable server hosting and providing more control in how you set up your server. For example, in Minecraft, you have the ability to control how many CPU cores you wish your server to have access to, how much RAM you want to use, how much disk space you want to use. This type of control can't be offered in a single service package so you're able to configure a custom package the way you want it.

      You can see all the available games here. Currently, we have the following games available.

      Valheim (From $1.50 USD)


      Rust (From $3.20 USD)


      Minecraft (Basic) (From $4.00 USD)


      Call of Duty 4X (From $7.00 USD)


      OpenTTD (From $4.00 USD)


      Squad (From $9.00 USD)


      Insurgency: Sandstorm (From $6.40 USD)


      Changes to US-East:

      Starting in January 2022, we will be moving to a different provider that has better support, better infrastructure, and better connectivity. We've noticed that the connection/routes to this location are not ideal and it's been hard getting support to correct this. Our contract for our two servers ends in March/April respectively. If you currently have servers in this location you will be migrated over to the new provider. We'll have more details when the time comes closer to January. The new location for this change will be based out of Atlanta, GA. If you have any questions/concerns please open a ticket and we'll do our best to answer them.
      • 5 replies
    • Hello All,

      I wanted to give an update to how EZRCON is doing. As of today we have 56 active customers using the services offered. I'm glad its doing so well and it hasn't been 1 year yet. To those that have services with EZRCON, I hope the service is doing well and if not please let us know so that we can improve it where possible. We've done quite a few changes behind the scenes to improve the performance hopefully. 

      We'll be launching a new location for hosting procon layers in either Los Angeles, USA or Chicago, IL. Still being decided on where the placement should be but these two locations are not set in stone yet. We would like to get feedback on where we should have a new location for hosting the Procon Layers, which you can do by replying to this topic. A poll will be created where people can vote on which location they would like to see.

      We're also looking for some suggestions on what else you would like to see for hosting provider options. So please let us know your thoughts on this matter.
      • 4 replies
    • Added ability to disable the new API check for player country info


      Updated GeoIP database file


      Removed usage sending stats


      Added EZRCON ad banner



      If you are upgrading then you may need to add these two lines to your existing installation in the file procon.cfg. To enable these options just change False to True.

      procon.private.options.UseGeoIpFileOnly False
      procon.private.options.BlockRssFeedNews False



       
      • 2 replies
    • I wanted I let you know that I am starting to build out the foundation for the hosting services that I talked about here. The pricing model I was originally going for wasn't going to be suitable for how I want to build it. So instead I decided to offer each service as it's own product instead of a package deal. In the future, hopefully, I will be able to do this and offer discounts to those that choose it.

      Here is how the pricing is laid out for each service as well as information about each. This is as of 7/12/2020.

      Single MySQL database (up to 30 GB) is $10 USD per month.



      If you go over the 30 GB usage for the database then each additional gigabyte is charged at $0.10 USD each billing cycle. If you're under 30GB you don't need to worry about this.


      Databases are replicated across 3 zones (regions) for redundancy. One (1) on the east coast of the USA, One (1) in Frankfurt, and One (1) in Singapore. Depending on the demand, this would grow to more regions.


      Databases will also be backed up daily and retained for 7 days.




      Procon Layer will be $2 USD per month.


      Each layer will only allow one (1) game server connection. The reason behind this is for performance.


      Each layer will also come with all available plugins installed by default. This is to help facilitate faster deployments and get you up and running quickly.


      Each layer will automatically restart if Procon crashes. 


      Each layer will also automatically restart daily at midnight to make sure it stays in tip-top shape.


      Custom plugins can be installed by submitting a support ticket.




      Battlefield Admin Control Panel (BFACP) will be $5 USD per month


      As I am still working on building version 3 of the software, I will be installing the last version I did. Once I complete version 3 it will automatically be upgraded for you.





      All these services will be managed by me so you don't have to worry about the technical side of things to get up and going.

      If you would like to see how much it would cost for the services, I made a calculator that you can use. It can be found here https://ezrcon.com/calculator.html

       
      • 11 replies
    • I have pushed out a new minor release which updates the geodata pull (flags in the playerlisting). This should be way more accurate now. As always, please let me know if any problems show up.

       
      • 9 replies
×
×
  • Create New...

Important Information

Please review our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.