Insane Limits: !setnext map command, to set next map by name

[ImportBot]

Originally Posted by PapaCharlie9*:

 

This limit enables admins who have a Procon account that permits map list changes to use chat commands to set the next map in the current rotation by name and to end the current round and run the next map, preserving scores.

 

The chat command for setting a map by name has this format:

 

!setnext shortMap shortMode rounds

 

The shortMode and rounds parameters are optional. If shortMode is omitted, ConquestLarge0 is assumed. If rounds are omitted, 1 is assumed. Map names and modes may be abbreviated, any unique case insensitive substring will work.

 

The command assumes you are trying to change to a map in the current rotation. If the map name is not in the current rotation, an error will be issued. However, if the map file code name is used in the command, that map will be added permanently to the end of the rotation.

 

!next

 

This command ends the current round immediately, preserving scores and going through the normal end-of-round sequence. Then the next map in the rotation will be loaded. Not to be confused with !nextlevel from the Procon In-Game Admin plugin, which terminates the current round without scores and immediately loads the next round.

 

Examples:

 

Suppose the current rotation is:

 

Paracel Storm, ConquestLarge0, 1

Flood Zone, ConquestLarge0, 1

Zavod 311, ConquestLarge0, 1

Golmud Railway, ConquestLarge0, 1

Operation Locker, ConquestLarge0, 1

 

And the game is currently running Paracel Storm.

 

All of these commands are equivalent:

 

!setnext rail

!setnext rail conquestlarge

!setnext rail conquestlarge 1

 

Each of those will set the next map to Goldmud Railway, ConquestLarge0, 1 round. When the Paracel Storm round ends normally, the map rotation will be skipped to Golmud Railway.

 

!setnext XP0_Metro

 

Since this map is not in the current rotation and the map name is a valid map file code name, a new entry will be added to the end of the current map rotation for Operation Metro 2014, ConquestLarge, 1 round. This is a permanent addition to the map list rotation.

 

!setnext MP_Siege Domination0 2

 

Since this map is not in the current rotation and the map name is a valid map file code name, a new etnry will be added to the end of the current map rotation for Siege of Shanghai, Domination, 2 rounds. This is a permanent addition to the map list rotation.

 

---

 

Create a new limit to evaluate OnAnyChat, call it "Map Command", leave Action set to None.

 

Set first_check to this Code:

 

Code:

/* Version 0.9/R8 */
int level = 2;

try {
    level = Convert.ToInt32(plugin.getPluginVarValue("debug_level"));
} catch (Exception e) {}


Match next1Cmd = Regex.Match(player.LastChat, @"^\s*!setnext\s+([^\s]+)$", RegexOptions.IgnoreCase);
Match next2Cmd = Regex.Match(player.LastChat, @"^\s*!setnext\s+([^\s]+)\s+([^\s]+)$", RegexOptions.IgnoreCase);
Match next3Cmd = Regex.Match(player.LastChat, @"^\s*!setnext\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)$", RegexOptions.IgnoreCase);
Match nextCmd = Regex.Match(player.LastChat, @"^\s*!next", RegexOptions.IgnoreCase);

if (!next1Cmd.Success && !next2Cmd.Success && !next3Cmd.Success && !nextCmd.Success) return false;

bool canKill = false;
bool canKick = false;
bool canBan = false;
bool canMove = false;
bool canChangeLevel = false;

if (!plugin.CheckAccount(player.Name, out canKill, out canKick, out canBan, out canMove, out canChangeLevel) || !canChangeLevel) {
    plugin.SendPlayerMessage(player.Name, "You are not permitted to use that command: " + player.LastChat);
    return false;
}

/* Default map list */

List<String> mapFileNames = server.MapFileNameRotation;
List<String> modeNames = server.GamemodeRotation;
List<int> rounds = server.LevelRoundsRotation;

/* Functions */

Converter<String,String> ShortMapToMapCode = delegate(String sname) {
    String ret = null;
    foreach (String name in mapFileNames) {
        try {
            String lname = plugin.FriendlyMapName(name);
            if (Regex.Match(lname, sname, RegexOptions.IgnoreCase).Success) {
                ret = name; // map code
                break;
            }
        } catch (Exception e) {
            return null;
        }
    }
    if (ret == null && sname.Contains("_")) ret = sname; // liternal map code name
    return ret;
};

Converter<String,String> ShortModeToLongMode = delegate(String smode) {
    String ret = null;
    foreach (String name in modeNames) {
        try {
            String lname = plugin.FriendlyModeName(name);
            if (Regex.Match(lname, smode, RegexOptions.IgnoreCase).Success) {
                ret = name; // map code
                break;
            }
        } catch (Exception e) {
            return null;
        }
    };
    if (ret == null && smode.Contains("0")) ret = smode; // literal mode name
    if (ret == null) ret = "ConquestLarge0";
    return ret;
};

Converter<String,int> MapCodeToIndex = delegate(String mc) {
    int i = 0;
    foreach (String mapFileName in mapFileNames) {
        if (Regex.Match(mapFileName, mc, RegexOptions.IgnoreCase).Success) {
            return i;
        }
        i = i + 1;
    }
    return i;
};

String mapCode = "MP_Prison";
int winner = (team1.RemainTicketsPercent > team2.RemainTicketsPercent) _ 1 : 2;

/* !next, ignore !nextlevel */

if (nextCmd.Success) {
    if (Regex.Match(player.LastChat, @"^\s*!nextlevel", RegexOptions.IgnoreCase).Success) return false; // let other plugin handle it
    if (level >= 2) plugin.ConsoleWrite("^b[MAP]^n " + player.FullName + " issued !next command");

    plugin.PRoConEvent("IGC !next", player.FullName);
    plugin.ServerCommand("mapList.endRound", winner.ToString());
    return false;
}

/* !setnext shortMap [shortMode] [rounds] */
/* Ignore !setnext integer */

if (next1Cmd.Success || next2Cmd.Success || next3Cmd.Success) {
    String shortMap = mapCode;
    String shortMode = "ConquestLarge";
    int r = 1;
    
    if (next1Cmd.Success) {
        shortMap = next1Cmd.Groups[1].Value;
        if (Regex.Match(shortMap, @"^[0-9]+$").Success) return false; // let other plugin handle it
    } else if (next2Cmd.Success) {
        shortMap = next2Cmd.Groups[1].Value;
        shortMode = next2Cmd.Groups[2].Value;
    } else if (next3Cmd.Success) {
        shortMap = next3Cmd.Groups[1].Value;
        shortMode = next3Cmd.Groups[2].Value;
        r = Convert.ToInt32(next3Cmd.Groups[3].Value);
    }
    
    // Get the map code
    mapCode = ShortMapToMapCode(shortMap);
    if (mapCode == null) {
        plugin.ServerCommand("admin.say", "Bad map name: " + shortMap, "player", player.Name);
        return false;
    }
    
    // Get the mode
    String longMode = ShortModeToLongMode(shortMode);
    if (longMode == null) {
        plugin.ServerCommand("admin.say", "Bad mode name: " + shortMode, "player", player.Name);
        return false;
    }
    
    if (level >= 2) plugin.ConsoleWrite("^b[MAP]^n " + player.FullName + ": !setnext " + mapCode + " " + longMode + " " + r );
    String dope = "Next map: " + plugin.FriendlyMapName(mapCode) + " " + plugin.FriendlyModeName(longMode) + " " + r;
    plugin.SendPlayerMessage(player.Name, dope);
    plugin.PRoConChat(player.FullName + "> " + dope);

    // Special case
    if (server.MapFileNameRotation.Contains(mapCode)) {
        
        int mapIndex = MapCodeToIndex(mapCode);
        if (mapIndex < modeNames.Count && modeNames[mapIndex] == longMode) {

        if (level >= 2) plugin.ConsoleWrite("^b[MAP]^n special case, setting next to existing map entry #" + mapIndex + ", " + plugin.FriendlyMapName(mapCode)  );

        // Say
        //plugin.ServerCommand("admin.say", "Next map will be " + plugin.FriendlyMapName(mapCode), "player", player.Name);

        // Set it as the next map
        plugin.ServerCommand("mapList.setNextMapIndex", mapIndex.ToString());
        
        return false;
      }
    }
    
    
    // Remember where we put this temporary map entry
    int lastMap = server.MapFileNameRotation.Count;

    if (level >= 2) plugin.ConsoleWrite("^b[MAP]^n setnext: temp map inserted at index #" + lastMap);
    
    // Say
    //plugin.ServerCommand("admin.say", "Next map will be " + plugin.FriendlyMapName(mapCode) + "/" + plugin.FriendlyModeName(longMode), "player", player.Name);

    // Add new map list entry at the end
    plugin.ServerCommand("mapList.add", mapCode, longMode, r.ToString());
    
    // Set it as the next map
    plugin.ServerCommand("mapList.setNextMapIndex", lastMap.ToString());
    
    // Refresh map list
    plugin.ServerCommand("mapList.list");

    return false;
}

return false;

[ImportBot]

Originally Posted by Level*:

 

Hey THX but,

 

It does not work 100% when I write !SetNext operation metro it change to operation firestorm _!

 

and why you need the right "Change current map funtions" why is not enough "Edit map zones"

 

LG Level

[ImportBot]

Originally Posted by madmuthamonk*:

 

I get this error when putting in the code above:

 

[12:54:17 21] [insane Limits] Compiling Limit #1 - Map Command - OnAnyChat

[12:54:17 22] [insane Limits] ERROR: 1 error compiling Code

[12:54:17 22] [insane Limits] ERROR: (CS1513, line: 36, column: 10): ) expected

 

What does that mean?

[ImportBot]

Originally Posted by PapaCharlie9*:

 

I get this error when putting in the code above:

 

[12:54:17 21] [insane Limits] Compiling Limit #1 - Map Command - OnAnyChat

[12:54:17 22] [insane Limits] ERROR: 1 error compiling Code

[12:54:17 22] [insane Limits] ERROR: (CS1513, line: 36, column: 10): ) expected

 

What does that mean?

Copy & paste error? I just tried it and did not get any errors. Are you using IE? Sometimes Internet Exploder causes copy&paste problems. Try a different browser.

 

You did'nt change any code, right? If you did, probably something you changed.

[ImportBot]

Originally Posted by madmuthamonk*:

 

I took out /* Version 0.9/R8 */ and no errors.

[ImportBot]

Originally Posted by madmuthamonk*:

 

This is for Conquest only? Tried to set it for rush and it set it to conquest.

[ImportBot]

Originally Posted by LCARSx64*:

 

This is for Conquest only? Tried to set it for rush and it set it to conquest.

Did you type the command like this:

!setmap rail RushLarge0 2

In this example, when the current round ends normally, the next map will be Golmud Railway ("rail"), gamemode will be RushLarge0 with 2 rounds.

[ImportBot]

Originally Posted by PapaCharlie9*:

 

!setnext shortMap shortMode rounds

 

The shortMode and rounds parameters are optional. If shortMode is omitted, ConquestLarge0 is assumed. If rounds are omitted, 1 is assumed. Map names and modes may be abbreviated, any unique case insensitive substring will work.

Highlighted in red for your (madmuthamunk's) edification.

 

Because "rush" is not unique (Rush and Squad Rush), you have to at least include the L, so the minimal command would be:

 

!setnext rail rushl 2

[ImportBot]

Originally Posted by trans-am*:

 

I have a few question about this limits:

 

1)

For example this is my current rotation:

 

Paracel Storm, ConquestLarge0, 1

Flood Zone, ConquestLarge0, 1

Zavod 311, ConquestLarge0, 1

Golmud Railway, ConquestLarge0, 1

Operation Locker, ConquestLarge0, 1

 

I am now playing Paracel storm and want to change to Operation Locker what do i type so that it will immediately change to that map?

 

2)

All of these commands are equivalent:

 

!setnext rail conquestlarge 1

For this other than the map file's code name, can we type the human readable map name (e.g Zavod 311)?

If so how do we type it short?

[ImportBot]

Originally Posted by PapaCharlie9*:

 

I have a few question about this limits:

 

1)

For example this is my current rotation:

 

Paracel Storm, ConquestLarge0, 1

Flood Zone, ConquestLarge0, 1

Zavod 311, ConquestLarge0, 1

Golmud Railway, ConquestLarge0, 1

Operation Locker, ConquestLarge0, 1

 

I am now playing Paracel storm and want to change to Operation Locker what do i type so that it will immediately change to that map?

There are two separate commands, set what the map will be in the next round, and end the current round and run the next round. You can see how using those together is the same as immediately changing, right? You would type this two commands, one after the other:

 

!setnext locker

!next

 

Since you only have one mode and always have 1 round, you just need part of the readable name. Any unique part of the name would work. You could probably just type "!setnext lock" and that would work.

 

2)

 

 

For this other than the map file's code name, can we type the human readable map name (e.g Zavod 311)?

If so how do we type it short?

You can't type "Zavod 311" because the command will think that 311 is the name of a mode, because it is separated by a space. Use any single word from the readable name that doesn't match any other part of any other name. Just use "zavod", for example. You can type everything lowercase if you want, it doesn't matter.

 

For your map list, all of the names are unique, but what if you had?

 

Operation Locker, ConquestLarge0, 1

Operation Firestorm 2014, ConquestLarge0, 1

 

You can't use "!setnext Operation", because two different maps have that word in it. If you want Firestorm, you'd have to use "!setnext Firestorm".

[ImportBot]

Originally Posted by trans-am*:

 

What went wrong for the first 2 command?

Capture.jpg

[ImportBot]

Originally Posted by PapaCharlie9*:

 

What went wrong for the first 2 command?

Capture.jpg

Nothing is wrong with the first two commands. It it is telling you that you didn't have Flood Zone in your maplist. When you used the mp_flooded form, it added the map to the end of your maplist.

[ImportBot]

Originally Posted by trans-am*:

 

1) so for the 1st two commands, it mean that the next map after this is flood zone if flood zone is in my maplist,?

 

2) Let say i have Locker (current map) & Shanghai in maplist & i key in mp_flooded, so after Locker end, it will skip shanghai and went straight to Flood zone? (take it all map is 1 round)

 

3) In my map list, Locker 2 round (current map), Shanghai 2 Round

and i have key in this !setnext mp_flooded domination0 2

 

so after round 1 of locker it will change to Flood zone or round 2 of locker

[ImportBot]

Originally Posted by PapaCharlie9*:

 

1) so for the 1st two commands, it mean that the next map after this is flood zone if flood zone is in my maplist,?

Yes, so if you let the current round finish normally, no more commands, the next round would jump to Flood Zone.

 

2) Let say i have Locker (current map) & Shanghai in maplist & i key in mp_flooded, so after Locker end, it will skip shanghai and went straight to Flood zone? (take it all map is 1 round)

Yes, and mp_flooded will be the last map in the map list.

 

If you use no other command, the current round will end normally in time, and then the next round will skip to Flood Zone.

 

If, however, immediately after !setnext you use the !next command, the current round will end immediately and then the next round will skip to Flood Zone.

 

3) In my map list, Locker 2 round (current map), Shanghai 2 Round

and i have key in this !setnext mp_flooded domination0 2

 

so after round 1 of locker it will change to Flood zone or round 2 of locker

Round 2 of Locker. The !setnext command sets the next map, not the next round. That is true if you let the round end normally or use the !next command. The !next command ends the current round and runs the next round, it doesn't really have anything to do with maps. It is a little confusing, one is about maps, the other is about rounds.

[ImportBot]

Originally Posted by trans-am*:

 

Thanks PapaCharlie9, this clear all the doubts that i have