Teamspeak 3 Sync

[ImportBot]

Originally Posted by finn*:

 

Here is how my settings looks like.

 

What kinda debugg you need?

 

Everything else seems to work fine now. Just needed to confirm each point i wanted corrected.

 

The problem is, i never get moved, and if I try to move myself, it moves me to battlefield 3 stagning.

 

I did some checking, and I change "players not playing" to False, It works.

 

Attached Files:

• procon.jpg

[ImportBot]

Originally Posted by hookey6*:

 

This plugin is great. It works fine with one server. Although, I am having issues with running 2 bf3 server to my teamspeak.

 

 

[20:22:52 55] Ts3 Sync: [Error] Fatal Error:

[20:22:52 55] Ts3 Sync: [Error] You were temporarily banned from the Teamspeak 3 Server for flooding.

[20:22:52 55] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist.

[20:22:52 57] Ts3 Sync: [Error] 3329: connection failed, you are banned (you may retry in 471 seconds)

[20:22:52 57] Ts3 Sync: [Disabled] Requesting Teamspeak 3 Sync to stop...

 

 

Also, both server are set up with different query usernames to connect to Teamspeak 3. I thought that might work. And it did not. So, any thought on what I could do?

[ImportBot]

Originally Posted by Imisnew2*:

 

Here is how my settings looks like.

 

What kinda debugg you need?

 

Everything else seems to work fine now. Just needed to confirm each point i wanted corrected.

 

The problem is, i never get moved, and if I try to move myself, it moves me to battlefield 3 stagning.

 

I did some checking, and I change "players not playing" to False, It works.

Finn, I'm going to change some logic in the next release to try and combat this. Just hang tight for now.

[ImportBot]

Originally Posted by Imisnew2*:

 

This plugin is great. It works fine with one server. Although, I am having issues with running 2 bf3 server to my teamspeak.

 

 

[20:22:52 55] Ts3 Sync: [Error] Fatal Error:

[20:22:52 55] Ts3 Sync: [Error] You were temporarily banned from the Teamspeak 3 Server for flooding.

[20:22:52 55] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist.

[20:22:52 57] Ts3 Sync: [Error] 3329: connection failed, you are banned (you may retry in 471 seconds)

[20:22:52 57] Ts3 Sync: [Disabled] Requesting Teamspeak 3 Sync to stop...

 

 

Also, both server are set up with different query usernames to connect to Teamspeak 3. I thought that might work. And it did not. So, any thought on what I could do?

[20:22:52 55] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist.

Please add it to your whitelist, or, use delayed queries-delayed queries doesn't always solve the problem, however.

[ImportBot]

Originally Posted by Buffalochips*:

 

Hey there! I was wondering if it might be possible to work this code so that our TS admins can move between channels for monitoring without being forced back into their team/squad by the plugin? I am Server Admin of what is quickly becoming a very busy 32 man BF3 server for a clan with a 10yr history. We started using your plugin recently and it performs great accept for this one issue. Although we are an adult clan we sometimes have our kids or grandkids in the TS playing bf3 and want to be able to keep an ear on them

[ImportBot]

Originally Posted by Imisnew2*:

 

Hey there! I was wondering if it might be possible to work this code so that our TS admins can move between channels for monitoring without being forced back into their team/squad by the plugin? I am Server Admin of what is quickly becoming a very busy 32 man BF3 server for a clan with a 10yr history. We started using your plugin recently and it performs great accept for this one issue. Although we are an adult clan we sometimes have our kids or grandkids in the TS playing bf3 and want to be able to keep an ear on them

About the best I can give you on this one is being able to join a channel without being kicked out-when not playing the game. The client whitelist already handles this. If you wish to talk to somebody in another game channel while playing the game, consider setting up a whisper list or pulling them out to another channel.

[ImportBot]

Originally Posted by Imisnew2*:

 

I'm waiting on a few responses back from Teamspeak and then I'll release a new version of the plugin that (correctly) works with server versions 3.0.3, along with a few feature updates/additions. Expect a release towards the beginning of next week.

[ImportBot]

Originally Posted by Imisnew2*:

 

Released 0.9.6 - Either download it from the packages tab, or grab it here*

 

0.9.5.5 -> 0.9.6

• Fixed some issues concerning new Teamspeak 3 server releases.
• Added some logic to attempt to fix a swapping issue.
• Added the ability to allow Teamspeak 3 Sync to pull clients from channels other than the Staging channel into the Plugin's Team and Squad channels.
• Added the ability to leave a player in the team channel (versus a squad channel) if there is less than a specified amount of players in the player's squad that are also on Teamspeak.
• Added the ability to move players to the staging channels between rounds for inter-team chat.

[ImportBot]

Originally Posted by Flyswamper*:

 

Imisnew2..... can you help a lazy guy understand something?

 

I read in this thread quite some time ago that a new release of Teamspeak caused trouble because the IP whitelist (teamspeak's whitelist) was being ignored.

I'm pretty sure I ran into this problem myself with our setup. Since then I've basically just left the plugin disabled and haven't really tried to get it going again.

 

My question is...Has the most recent releases of Teamspeak brought everything back into "proper working order" again?

 

I did try just reactiating the plugin (without updating it, or checking settings, or much of anything else) and the plugin disables itself almost instantly. I am just wondering what the situation is before I decide to spend time (or not) messing with it again. What versions of Teamspeak works and what versions don't? Or have I misread the situation?

 

Thanks.

[ImportBot]

Originally Posted by Imisnew2*:

 

3.0.2 is the only version that the plugin doesn't work with, to my knowledge. As long as you setup the whitelist, you're ok.

[ImportBot]

Originally Posted by Flyswamper*:

 

thanks!

[ImportBot]

Originally Posted by Imisnew2*:

 

Update your plugin to 0.9.6! Several people are still using 0.9.5.5.

[ImportBot]

Originally Posted by ReAP3R_za*:

 

Hi guys,

 

I have a noob question. I host Procon instances and have been trying to get the TS3 synch to run on a customers server for most of the day now. Here's what I've done / tried thus far

1) I've deleted all files associated with the TS3 synch,

2) Stopped both the layers and the actual instance on the server.

3) Started it up again and made sure there's no TS3 Synch related files on either the server on my local where I run a layer.

 

However, when I click on Packages it shows the plugin as installed. I even deleted all the servers I had running on my local layer and re-added just the one server. It then shows as not installed, however when I click in stall it says the plugin is already installed. I've now run out of ideas on what to try. Would anyone be willing to part with some wisdom?

[ImportBot]

Originally Posted by QUACK-Major-Pain*:

 

I think you have to look in the procon.cfg or whatever the .cfg file is called and remove any lines related to the plugin.

[ImportBot]

Originally Posted by ReAP3R_za*:

 

I think you have to look in the procon.cfg or whatever the .cfg file is called and remove any lines related to the plugin.

Done that, still have the same problem.

[ImportBot]

Originally Posted by Imisnew2*:

 

Done that, still have the same problem.

Whether a package is installed or not is controlled via the "packages/.xml" file. Delete this, and Procon will think the plugin is not installed, whether the plugin is in the Plugins folder or not. This only affects the package tab. If you manually place the plugin in the Plugins folder, it will still work and show up under the plugins tab.

[ImportBot]

Originally Posted by terwax*:

 

getting:

 

Fatal Error:

An error occurred during establishing a connection to the teamspeak 3 server.

Make sure your "Server Ip" and 'Query Port" are correct.

-4: An error occurred when trying to establish a connection.

Requesting Teamspeak 3 Sync to stop...

TS3 sync debug: Event Processing plugin disabled event

 

 

 

 

Double checked the query and ip, tried hostname too. Contacted RSP but they ain't got clue. I am with NFOservers renting 20 slots

[ImportBot]

Originally Posted by Imisnew2*:

 

getting:

 

Fatal Error:

An error occurred during establishing a connection to the teamspeak 3 server.

Make sure your "Server Ip" and 'Query Port" are correct.

-4: An error occurred when trying to establish a connection.

Requesting Teamspeak 3 Sync to stop...

TS3 sync debug: Event Processing plugin disabled event

 

 

 

 

Double checked the query and ip, tried hostname too. Contacted RSP but they ain't got clue. I am with NFOservers renting 20 slots

PM me your TS info and a time you'd like to meet up. If I'm available, I'll let you know.

[ImportBot]

Originally Posted by terwax*:

 

messeged you

[ImportBot]

Originally Posted by wishmaster2002uk*:

 

hi great plugin the only issue i have with it is i keep getting banned by ts for flooding

 

i have added the ips to the whitelist but anymore than 2 players and the plugin either disables itself in procon or im banned for flooding.

 

any ideas how i could prevent this. ?

[ImportBot]

Originally Posted by Imisnew2*:

 

hi great plugin the only issue i have with it is i keep getting banned by ts for flooding

 

i have added the ips to the whitelist but anymore than 2 players and the plugin either disables itself in procon or im banned for flooding.

 

any ideas how i could prevent this. ?

Hi Wish,

If you're getting banned from Teamspeak, then you have not entered the correct IP of your Procon Layer. If your Procon Layer and Teamspeak 3 server are on the same machine, then make sure to add "localhost" or "127.0.0.1" to the whitelist, if you use one of those methods to connect to your Teamspeak 3 server.

[ImportBot]

Originally Posted by wishmaster2002uk*:

 

will let my host know and get back to you asap

[ImportBot]

Originally Posted by wishmaster2002uk*:

 

a message from my host

 

 

please remind the dev that we have several hosted without issue using the same IP's

[ImportBot]

Originally Posted by Imisnew2*:

 

a message from my host

 

 

please remind the dev that we have several hosted without issue using the same IP's

Wish, please paste all of the plugin's settings here (except your passwords, be sure to remove those).

[ImportBot]

Originally Posted by TRIGGA*:

 

I have set this awesome plugin up and all works well for a few minutes, it connects then moves people correctly and makes the new TS channels etc. Then shortly after I get the following message.

 

[16:29:58 85] Ts3 Sync: [Reconnect] Failed attempt 4 out of 5.

[16:30:06 35] Ts3 Sync: [Connection] Establishing a connection to a Teamspeak 3 Server.

[16:30:07 35] Ts3 Sync: [Error] Fatal Error:

[16:30:07 35] Ts3 Sync: [Error] You were temporarily banned from the Teamspeak 3 Server for flooding.

[16:30:07 35] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist.

[16:30:07 35] Ts3 Sync: [Error] 3329: connection failed, you are banned (you may retry in 553 seconds

 

Can someone please show me there whitelist file format so I can show my server provider how to enter the procon IPs in the whitelist.

[ImportBot]

Originally Posted by Imisnew2*:

 

The whitelist is simply an empty file (usually has 127.0.0.1 in it by default) where each IP that you want to whitelist should be put on a new line. For example:

 

localhost

127.0.0.1

192.168.1.100

20.113.10.191

 

I think it's called... query_ip_whitelist.txt

[ImportBot]

Originally Posted by Imisnew2*:

 

So, of those of you out there who use the plugin, who would be interested in adding the functionality to move players who are in teamspeak into the same squads in the game?

[ImportBot]

Originally Posted by CBG*:

 

Hi,

 

I have 2 20 slot BF3 servers and am going to be getting a 40 slot teamspeak server, if this work.

It is possible for server 1 and server 2 to be put into different channels, both servers have there own Procon running.

 

So for example

 

Server 1 - TS3/Server1/TeamX channel

Server 2 - TS3/Server2/TeamX channel

 

TeamX meaning the team they are on.

Also will this plugin create the TeamX channel, or will I need to create them first

[ImportBot]

Originally Posted by Imisnew2*:

 

@CBG

 

Yes, that is fine. Yes, it will create the channels.

[ImportBot]

Originally Posted by kycu*:

 

Very very good work!

 

But... after restart procon server this plugin disabling itself . It's one annoying bug it is possible to fix it?