Teamspeak 3 Sync

[ImportBot]

Originally Posted by qwoody*:

 

I am unsure if the part "Procon instance is running in sandbox mode, you'll need to add your Teamspeak 3 server's ip to the allowed hosts list. See the instructions on how to do that" is my problem but I can't get this to even make a connection. I can't find any information on how to add this to a procon allowed hosts list. Any information regarding that would be amazing. Thanks!

 

Update:

It's been busy for me lately and I'm stuck without internet. I should be able to look at some bugs this weekend if I can get unpacked and setup.

 

As for the invalid server ip and port, make sure you are using the server ip and query port. If you've checked that, make sure the box the TeamSpeak 3 sever is on has the necessary ports opened and forwarded. Also, if your Procon instance is running in sandbox mode, you'll need to add your Teamspeak 3 server's ip to the allowed hosts list. See the instructions on how to do that.

[ImportBot]

Originally Posted by Imisnew2*:

 

I am unsure if the part "Procon instance is running in sandbox mode, you'll need to add your Teamspeak 3 server's ip to the allowed hosts list. See the instructions on how to do that" is my problem but I can't get this to even make a connection. I can't find any information on how to add this to a procon allowed hosts list. Any information regarding that would be amazing. Thanks!

Top of the page, or the first post:

 

PRoCon Setup:

Teamspeak 3 Sync doesn't need any special setup out-of-the-box unless PRoCon is running in a sandbox. You can check whether PRoCon is running in a sandbox and add exceptions for Teamspeak 3 Sync by following the steps outlined below:

[-] Start PRoCon, go to Tools > Options.

[-] Under the Plugins tab, check if the drop-down is set to "Run plugins in a sandbox (recommended)."

[-] If it is, add your Teamspeak 3 Server's IP and Query Port to the Trusted Domains.

[ImportBot]

Originally Posted by Imisnew2*:

 

Did you ever get your connection issues resolved?

[ImportBot]

Originally Posted by boasist*:

 

Maybe it's somewhere in this thread but my searches didn't turn up anything.

 

I have a different channel structure

Main Lobby

BF3 - defined as staging channel

Minecraft

 

Is there any way to have the plugin recognize I'm playing BF3 and auto move me from the Main Lobby to the BF3 channel and then the appropriate sub-channel for my team?

[ImportBot]

Originally Posted by Imisnew2*:

 

Maybe it's somewhere in this thread but my searches didn't turn up anything.

 

I have a different channel structure

Main Lobby

BF3 - defined as staging channel

Minecraft

 

Is there any way to have the plugin recognize I'm playing BF3 and auto move me from the Main Lobby to the BF3 channel and then the appropriate sub-channel for my team?

I can't remember the setting name exactly, but you should be able to add a list of channels that the plugin is allowed to pull players from. It will only place you back in the staging channel once done, though.

[ImportBot]

Originally Posted by Imisnew2*:

 

Pickup Channel Names

[ImportBot]

Originally Posted by boasist*:

 

Pickup Channel Names

Awesome, plugin is working great for us. Procon, teamspeak, and BF3 all hosted from gameservers.com.

 

Thanks again for a great plugin.

[ImportBot]

Originally Posted by celtsmaddog*:

 

can you use this to connect to teamspeak via the bf3 server or does it just sync your in bf3 game name with the team that you are on in in the teamspeak channel. thanks

[ImportBot]

Originally Posted by MorpheusX(AUT)*:

 

It just synchs the teamspeak-users online on the server with their teams ingame. You cannot issue a "ts-server join" with this.

[ImportBot]

Originally Posted by celtsmaddog*:

 

It just synchs the teamspeak-users online on the server with their teams ingame. You cannot issue a "ts-server join" with this.

Thanks thats what I needed to know

[ImportBot]

Originally Posted by flat*:

 

First off thanks for a great plugin

I have Question.

 

I have this running on one of our servers and it works great.

 

We have 4 servers though and would like this to simply put you in that servers TS room and not creatie extra 'team' rooms. Is that possible?

 

Example TS has 4 rooms. BF3#1, BF3#2, BF3#3 and BF3#4 If I join the BF3 game server #4 can this move to TS Channel BF#4 and if I move to BF3#2 game server move me to that TS channel BF3#2 with out creating Team rooms.

 

If this plugin works that way what are the settings?

[ImportBot]

Originally Posted by Imisnew2*:

 

First off thanks for a great plugin

I have Question.

 

I have this running on one of our servers and it works great.

 

We have 4 servers though and would like this to simply put you in that servers TS room and not creatie extra 'team' rooms. Is that possible?

 

Example TS has 4 rooms. BF3#1, BF3#2, BF3#3 and BF3#4 If I join the BF3 game server #4 can this move to TS Channel BF#4 and if I move to BF3#2 game server move me to that TS channel BF3#2 with out creating Team rooms.

 

If this plugin works that way what are the settings?

First off, for each server, a seperate instance of the plugin should be running (4 different server connections).

 

Setup the plugin so team swapping is turned off. Set the staging channel to the server you want it to be (BF1, 2, 3, 4, etc). Add the channels you want the plugin to pull people from using the setting I mentioned a post or two ago.

 

Rinse and repeat for each server.

 

Sent from my DROIDX using Tapatalk 2

[ImportBot]

Originally Posted by flat*:

 

Thanks man!! That worked Great!! finally, Some order to our TS

[ImportBot]

Originally Posted by n7Angel*:

 

Haven't tried it yet, will when both TS and BF server gets populated later today, but man... awesome plugin! my congratulations!

[ImportBot]

Originally Posted by STALKERqwe*:

 

Can someone help me with this problem?

[03:10:54 95] Ts3 Sync: A fatal error occurred during processing a command!

[03:10:54 95] Ts3 Sync: Message: Nullable object must have a value.

[03:10:54 95] Ts3 Sync: Stack Trace: at System.ThrowHelper.ThrowInvalidOperationException( ExceptionResource resource)

at PRoConEvents.TeamspeakSync.updateTsInfo()

at PRoConEvents.TeamspeakSync.EntryMain()

[03:10:54 95] Ts3 Sync: [Disabled] Requesting Teamspeak 3 Sync to stop...

[03:10:56 62] Ts3 Sync: [Closing] Shutting down Teamspeak 3 Sync.

[03:10:56 62] Ts3 Sync: [Closing] Cleaning up resources.

[03:10:56 62] Ts3 Sync: [Closing] Teamspeak 3 Sync stopped.

[ImportBot]

Originally Posted by Imisnew2*:

 

Can someone help me with this problem?

If this isn't occurring often, I would just ignore it.

 

If this is occurring often, I need to know what version of Teamspeak your server is.

[ImportBot]

Originally Posted by STALKERqwe*:

 

Thanks for responding

If this is occurring often, I need to know what version of Teamspeak your server is.

3.0.6.1 on Linux

[ImportBot]

Originally Posted by Imisnew2*:

 

Thanks for responding

 

3.0.6.1 on Linux

Since this is happening often, I'll need one more piece of information. Under the debugging section in the plugin settings, please turn on networking debugging. This will contain a lot of useless information, but it is imperative that I have this in order to trouble shoot your problem.

 

You can make your life easier by turning on plugin console logging, which will save the plugin console's text to a file. You can then send that file to me after you see the problem again. PM or here is fine, just be sure to remove sensitive information if you post it here.

[ImportBot]

Originally Posted by WarGasimXD*:

 

Hey guys they ts3sync works Awsome the only problem I have is I have the main channel everyone connects to in our teamspeak as one of the pick up channels so TS3sync will grab them and put them into there team or squad, the problem I'm having its grabbing everyone that come's into teamspeak even my BF2, starwars, players everyone and putting them into the staging channel but none of them are in the BF3 server, how Do I get the TS3sync to only grab players that are in the BF3 server

[ImportBot]

Originally Posted by Imisnew2*:

 

Hey guys they ts3sync works Awsome the only problem I have is I have the main channel everyone connects to in our teamspeak as one of the pick up channels so TS3sync will grab them and put them into there team or squad, the problem I'm having its grabbing everyone that come's into teamspeak even my BF2, starwars, players everyone and putting them into the staging channel but none of them are in the BF3 server, how Do I get the TS3sync to only grab players that are in the BF3 server

I'll have to look into this. Sounds like a bug.

[ImportBot]

Originally Posted by WarGasimXD*:

 

I'll have to look into this. Sounds like a bug.

Ok thanks let me know how it goes. right now I have it to where the lobby is the Staging channel so it will not grab anyone out of it thats not in the server, hopefully you can get this fixed.

[ImportBot]

Originally Posted by WarGasimXD*:

 

And also no matter what we do, Teamsync gets flood banned after about 20 minutes or so. Our TS3 provider (Gameservers) has added the procon ip to the whitelist for us and still gets flood banned. I even turned on Delay Queries and set the delay to 2000ms and the update interval all the way up to 20000 and still gets flood banned after a bit

[ImportBot]

Originally Posted by Jaythegreat1*:

 

Anybody have their procon hosted through branzone... they've changed how you access files and now my account is getting banned for flooding.

 

23:52:59 04] Ts3 Sync: [Error] Fatal Error:

[23:52:59 04] Ts3 Sync: [Error] You were temporarily banned from the Teamspeak 3 Server for flooding.

[23:52:59 04] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist.

[23:52:59 04] Ts3 Sync: [Error] 3329: connection failed, you are banned (you may retry in 298 seconds

[ImportBot]

Originally Posted by Imisnew2*:

 

And also no matter what we do, Teamsync gets flood banned after about 20 minutes or so. Our TS3 provider (Gameservers) has added the procon ip to the whitelist for us and still gets flood banned. I even turned on Delay Queries and set the delay to 2000ms and the update interval all the way up to 20000 and still gets flood banned after a bit

It seems my post was eaten by the forum move-overs. The flood banning logic was never perfect, unfortunately. However, GameServers did not add the proper IP to the whitelist if you're still getting flood banned.

[ImportBot]

Originally Posted by Jaythegreat1*:

 

Yea it seems to happen randomly to us, we have branzone... not sure what I need to do to minimize it.

 

EDIT: Well.. just realized Delayed Queries was set to false. Swapped it to True and set it to 1000. See how that does.

 

EDIT #2: Still got banned, try raising the values even further.... also is running procon "required" for this plug-in? It's not on at the moment.

[ImportBot]

Originally Posted by Imisnew2*:

 

EDIT #2: Still got banned, try raising the values even further.... also is running procon "required" for this plug-in? It's not on at the moment.

Yes. Just like every other plugin, procon must be running for this plugin to work.

 

Also, the delayed queries will only increase the time between when you're banned, unfortunately. It doesn't work entirely.

[ImportBot]

Originally Posted by Imisnew2*:

 

Also, the delayed queries will only increase the time between when you're banned, unfortunately. It doesn't work entirely.

According to a post over on Teamspeak's forums:

SERVERINSTANCE_SERVERQUERY_FLOOD_COMMANDS

SERVERINSTANCE_SERVERQUERY_FLOOD_TIME

Per default, the TeamSpeak 3 Server will not allow more than 10 commands within 3 seconds from the same source.

You'll need to ask your GSP what these settings are so you can modify the delay accordingly. There's nothing else I can really do.

[ImportBot]

Originally Posted by Imisnew2*:

 

Additionally, I've released Teamspeak 3 Sync 1.0.0.0.

 

It includes one fix:

 

Do not swap players from pickup channels to the staging channel.

 

https://www.dropbox.com/s/ou7xvia9ji...nc_1.0.0.0.zip

[ImportBot]

Originally Posted by ozplanet*:

 

We have a this situation, we have a Public Staging area and a Private Staging area. Private being only for Clan members or those who have a the password.

 

Is there a way to run 2 copies of the plugin on the same Procon server ?

 

Also, an added feature to kick a user from TS if they are not in the BF3 server ? Maybe check every 5 minutes then kick to free up space in TS.

 

BTW love the plugin we have been using it for about 2 weeks now without issue.

[ImportBot]

Originally Posted by Imisnew2*:

 

We have a this situation, we have a Public Staging area and a Private Staging area. Private being only for Clan members or those who have a the password.

 

Is there a way to run 2 copies of the plugin on the same Procon server ?

I'm not sure of what you're trying to accomplish here, but you could set the public channel as the staging channel and add the private channel as a pickup channel.

 

Also, an added feature to kick a user from TS if they are not in the BF3 server ? Maybe check every 5 minutes then kick to free up space in TS.

That would be fairly simple. I'll see about it.

 

BTW love the plugin we have been using it for about 2 weeks now without issue.

Thanks