Teamspeak 3 Sync

[ImportBot]

Originally Posted by Master_Pain*:

 

Set the team based threshold and squad based threshold to 0. Pretty sure, the squad based threshold always have to be higher, I go with a 4/8 split. Also, your TS query username and PW are not there. I assume you blotted out the PW, but just checking to make sure you knew about those fields. Disable the yell function as well, it doesn't work in BF3.

[ImportBot]

Originally Posted by Imisnew2*:

 

@chikarkas36

 

I'll need you to turn debug on. This is a setting on the plugin settings page for Teamspeak Sync. This will put a lot of text in the plugin console. Please turn on plugin logging, so that all the plugin text is saved to a file. Then, please Private Message (PM) me the log files on this site. This will help me more accurately describe your issue.

[ImportBot]

Originally Posted by BdG-Diesel*:

 

ok, I think I have everything set correct.... The IP is whitelisted and this is what Procon shows me...

 

[21:54:22 50] Ts3 Sync: Attempting to establish a connection to Teamspeak. Please allow 30-60 seconds for this to complete!

[21:54:22 98] Ts3 Sync: Established connection to VOICE-WA1.BRANZONE.COM:10011.

[21:54:23 09] Ts3 Sync: Authenticated as Procon.

[21:54:23 14] Ts3 Sync: Selected the virtual server on port 9995.

[21:54:23 45] Ts3 Sync: Found the staging channel.

[21:54:24 51] Ts3 Sync: Beginning Synchronization.

 

then does NOTHING. It does not switch channels, etc.

 

Help please.

[ImportBot]

Originally Posted by QUACK-Major-Pain*:

 

Are you in the staging channel?

[ImportBot]

Originally Posted by BdG-Diesel*:

 

yes, we all are.

 

Staging channel name is Battlefield 3

i also named the team channels to US and RU. They are Sub-channels of the staging channel.

[ImportBot]

Originally Posted by BdG-Diesel*:

 

Imisnew2...thanks for popping on TS. My TS3 host made the change from host name to IP...no port, and it worked!!

 

Great program! Thanks for your help!!! If there is ever anything I can do to help you out, just give me a shout.

[ImportBot]

Originally Posted by santraxt*:

 

Hi i am getting this debug error can anyone help .Me and my game server and ts3 server provider trying to figure this one out

 

" Ts3 Sync-debug--------TS Client [ip:NULL_IP, Channel: NULL_CHANNEL, Name: NULL_NAME]/BC CLIENT [ip:"players ip", Team 1 Name:"Players name"]

 

thanks for your help

[ImportBot]

Originally Posted by Imisnew2*:

 

Hi i am getting this debug error can anyone help .Me and my game server and ts3 server provider trying to figure this one out

 

" Ts3 Sync-debug--------TS Client [ip:NULL_IP, Channel: NULL_CHANNEL, Name: NULL_NAME]/BC CLIENT [ip:"players ip", Team 1 Name:"Players name"]

 

thanks for your help

That's not an error, simply debug output.

[ImportBot]

Originally Posted by santraxt*:

 

That's not an error, simply debug output.

how do i fix this even i don't connect to the ts3

[ImportBot]

Originally Posted by santraxt*:

 

well here my issue procon.private.options.runPluginsInSandbox

if it on true it give the connection error and if it's on false it give the debug thing

[ImportBot]

Originally Posted by Imisnew2*:

 

The debug print is related to the debug setting. Turn it off if you don't want to see it.

[ImportBot]

Originally Posted by santraxt*:

 

ok find well it still does't connect anyone to the ts3

[ImportBot]

Originally Posted by QUACK-Major-Pain*:

 

Don't think it is supposed to.

It only moves players already in your TS3 staging channel to the appropriate channels.

[ImportBot]

Originally Posted by Sniper1154*:

 

Kind of have an idiotic question:

 

1) Where do I find my ProCon IP? I'm running my teamspeak via Gameservers so I'm thinking I'll have to email them to allow that IP to the "Whitelist" file

[ImportBot]

Originally Posted by QUACK-Major-Pain*:

 

Sorry to hear your with Gameservers.

They have really started the practice of not allowing FTP access to anything.

[ImportBot]

Originally Posted by santraxt*:

 

Hi figure out why it would not move me in the appropriate channel, all channel need to be sub channel of the staging channel for it to be able to move you.Now i got it to work is it possible for it to move you in the approprite squad channel or it's only to Team 1 and Team 2.

 

Thank for your time and patience

 

ok figure it out works like a charm nice add on guy GJ.

 

If anyone want to try this you can connect to ts3 ip: 109.169.20.100:10059 and bf3 server: search gamehosting....server name is GameHosting.co.uk ::|TNC| Rush Only All Maps

[ImportBot]

Originally Posted by PibesiLL*:

 

Cool Plugin, works like a dream tnx

[ImportBot]

Originally Posted by jimbouk1977*:

 

Hi getting this error it logs in to TS3 but disconnects with in a second then on the debug nothing else happens strange thing is it did work once then i tried changing the Server Query details UN & PW for it & now it wont stay logged in or get past what ive pasted bellow

 

Code:

[20:21:59 66] Ts3 Sync: Attempting to establish a connection to Teamspeak.  Please allow 30-60 seconds for this to complete!
[20:22:00 16] Ts3 Sync: Established connection to 193.93.44.103:10011.
[20:22:00 40] Ts3 Sync: Authenticated as procon.
[20:22:00 44] Ts3 Sync: Selected the virtual server on port 10053.
[20:22:00 70] Ts3 Sync: Found the staging channel.
[20:22:01 72] Ts3 Sync: Beginning Synchronization.

[ImportBot]

Originally Posted by BigDawg-LT*:

 

Mine was working fine the other day but for some reason it stopped moving people to the correct channels. I looked at the debug list and it says it is moving people but on the TS it self, no one is being moved. Like I said it was working the other day and no changes has been made at all. I would appreciate all the help i can get with this issue. It is a great plugin for or TS3 server.

Thank You for all the hard work you have put into this.

[ImportBot]

Originally Posted by Imisnew2*:

 

@jimbouk1977 & BigDawg-LT

 

It sounds as though your Procon Server's IP is not in your query_ip_whitelist.txt file for your Teamspeak 3 server. The plugin doesn't handle issues that arise from this very well, and it will look as though the plugin is "doing nothing, but is connected." Please double check that your Procon Server's IP is on the whitelist.

[ImportBot]

Originally Posted by jimbouk1977*:

 

@jimbouk1977 & BigDawg-LT

 

It sounds as though your Procon Server's IP is not in your query_ip_whitelist.txt file for your Teamspeak 3 server. The plugin doesn't handle issues that arise from this very well, and it will look as though the plugin is "doing nothing, but is connected." Please double check that your Procon Server's IP is on the whitelist.

Thanks for fast reply I got a layer for my Procon servers & asked my TS 3 provider to add that layer IP to the white list which they have done but now it wont log in at all

log below

[21:22:09 91] Ts3 Sync: Attempting to establish a connection to Teamspeak. Please allow 30-60 seconds for this to complete!

[21:22:09 91] Ts3 Sync: There was an issue establishing a connection to 193.93.44.103:10011.

[21:22:09 91] Ts3 Sync: Check your Teamspeak IP and Teamspeak Query Port then try again.

[21:22:09 91] Ts3 Sync: An error occurred with the Teamspeak3 connection:

[21:22:09 91] Ts3 Sync: -2: Connection to the Teamspeak3 Server failed.

[21:22:09 91] Ts3 Sync: Attempting to establish a connection to Teamspeak. Please allow 30-60 seconds for this to complete!

[21:22:09 91] Ts3 Sync: There was an issue establishing a connection to 193.93.44.103:10011.

[21:22:09 91] Ts3 Sync: Check your Teamspeak IP and Teamspeak Query Port then try again.

[21:22:09 91] Ts3 Sync: Failed attempt 1 out of 10.

[21:22:10 92] Ts3 Sync: Stopping Synchronization...

[21:22:14 91] Ts3 Sync: Disabling the plugin.

Now dumb question do i need to get my TS3 provider to add my home IP to the white list also __.

 

T.I.A

jim

 

 

P.S. once again for a great plugin & speedy reply

[ImportBot]

Originally Posted by Imisnew2*:

 

@jimbouk1977

 

No, only the layer for the IP is needed. If your layer is running in a sandbox (which, if you are paying for the layer, it most likely is), make sure to read the directions on the plugin's description page to be able to establish an outgoing connection to the Teamspeak 3 Server.

[ImportBot]

Originally Posted by jimbouk1977*:

 

Right sorted now it logs in & Debug is working & constantly saying

 

Code:

[04:34:44 11] Ts3 Sync: Established connection to 193.93.44.103:10011.
[04:34:44 20] Ts3 Sync: Authenticated as procon.
[04:34:44 20] Ts3 Sync: Selected the virtual server on port 10053.
[04:34:44 44] Ts3 Sync: Found the staging channel.
[04:34:45 44] Ts3 Sync: Beginning Synchronization.
[04:34:45 95] Ts3 Sync - Debug: ----------Client Listing (Check Swap All):
[04:34:45 95] Ts3 Sync - Debug: ----------TS Client [Ip: 86.27.92.99, Channel: 6148, Name: jimbouk1977] / BC Client [Ip: Null_IP, Team: Null_Team, Name: Null_Name]
[04:34:51 00] Ts3 Sync - Debug: ----------Client Listing (Check Swap All):
[04:34:51 00] Ts3 Sync - Debug: ----------TS Client [Ip: 86.27.92.99, Channel: 6148, Name: jimbouk1977] / BC Client [Ip: 86.27.92.99, Team: 2, Name: jimbouk1977]
[04:34:55 91] Ts3 Sync - Debug: ----------Client Listing (Check Swap All):
[04:34:55 91] Ts3 Sync - Debug: ----------TS Client [Ip: 86.27.92.99, Channel: 6148, Name: jimbouk1977] / BC Client [Ip: 86.27.92.99, Team: 2, Name: jimbouk1977]

Yet the plugin is not making the channels or moving players around

Any Ideas _.

 

Update

as soon as a second person came into TS3 & server it worked is that the Team-Based Threshold setting that does that ? as i have it set to 2 if i change to 0 will that move one player _.

 

 

Yet again this is a Great App i thank you for you quick responses & great work.

[ImportBot]

Originally Posted by QUACK-Major-Pain*:

 

Might have to check settings and grant move permissions.

I think there was a post with instruction 1 or 2 pages ago.

[ImportBot]

Originally Posted by jimbouk1977*:

 

Might have to check settings and grant move permissions.

I think there was a post with instruction 1 or 2 pages ago.

Ahh OK will try find it only thing is its a hosted TS3 so they have limited the permisions i can mess with

[ImportBot]

Originally Posted by Imisnew2*:

 

@jimbouk1977

 

If you're Team-based Threshold is set to two, it will not move people out of the staging channel (into teams) until there are two players on both the Teamspeak 3 server and Bad Company 2 server.

[ImportBot]

Originally Posted by Lannovar*:

 

Along with vent, ill look into it over the summer. Just check back in a few months, once college has let out and I have more time to work on it.

Checking back, mumble interest. Got any progress?

[ImportBot]

Originally Posted by Imisnew2*:

 

Checking back, mumble interest. Got any progress?

Hahaha, I was wondering if anyone was gonig to bring up Vent or Mumble again, but it's been affectively ruled out at this time. I'm sorry Lannovar.

[ImportBot]

Originally Posted by jimbouk1977*:

 

@jimbouk1977

 

If you're Team-based Threshold is set to two, it will not move people out of the staging channel (into teams) until there are two players on both the Teamspeak 3 server and Bad Company 2 server.

Thanks Imisnew2 i will leave it at two as no point if only one in TS3 any way just glad it is all working across all 4 of my servers its a Great plugin & once i have a few spare shirt buttons i will donate for it.

 

 

Thanks once again this is truley a great plugin. & your support is A1 also

[ImportBot]

Originally Posted by PBSGTS*:

 

What? Apparently multiplay won't add IPs to the whitelist.

 

Anyone know what host will?

 

Hi,

 

Usually we would not make additions to this however may I ask why you are looking to have this added and who/what organisation the IP address belongs to?

 

Thanks