Custom Warning Generator [Ver 2.0.2.2 3rd April] [BC2, BF3]

[ImportBot]

Originally Posted by dmccart4*:

 

Are the commands triggered when a player enters the set zone or when a player kills in the set zone?

[ImportBot]

Originally Posted by Zaeed*:

 

Are the commands triggered when a player enters the set zone or when a player kills in the set zone?

When the player kills

[ImportBot]

Originally Posted by Zaeed*:

 

Zaeed, I ran this plugin on our PRoCon server for a fair amount of time, say six weeks, and then we started noticing severe lag on the BFBC2 server. Eventually our GSP, killed off all the plugins running on our PRoCon server and things returned to normal. Except no plugins running.

 

After much fuss, a clean re-installation of PRoCon was made and we are now operating with the basic load of plugins. No problems at the moment. Further discussions with Branzone revealed that when the CWG plugin was activated, it created a 100% CPU utilization which affected our BFBC2 server. We currently have two instances of PRoCon on the same server one for vanilla BFBC2 and one for Vietnam. Both servers appeared to exhibit this behavior.

 

We had a total of 17 custom commands generated for use by admins in-game. No zone actions created.

 

We would like to reload the CWG plugin but need to figure out what's going on first. From the little bit of info I've provided, do you have any ideas?

Hmmmmmmmm.. I've never had that happen, or heard of it happening..

 

I'll try and do some testing to replicate the issue..

 

Can you give me some screen shots of the setup?

[ImportBot]

Originally Posted by PanamaJim*:

 

Unfortunately screen shots are not possible. When the PRoCon server began acting up, our GSP stepped in to remedy the situation. The plugins were copied off to a new folder and then PRoCon reinstalled. I have access to the old plugins folder if there is some nature of information that would be useful. Maybe a file that retains the settings between server restarts?

 

EDITED NOTE: Scratch that. I just took a look at the old plugins folder. Looks like someone went through it and cleaned out all of the non-original plugins. Nothing is available at this point.

 

I'll re-install the plugin and add the commands back in. Will report back if there are any issues.

[ImportBot]

Originally Posted by Zaeed*:

 

Unfortunately screen shots are not possible. When the PRoCon server began acting up, our GSP stepped in to remedy the situation. The plugins were copied off to a new folder and then PRoCon reinstalled. I have access to the old plugins folder if there is some nature of information that would be useful. Maybe a file that retains the settings between server restarts?

 

EDITED NOTE: Scratch that. I just took a look at the old plugins folder. Looks like someone went through it and cleaned out all of the non-original plugins. Nothing is available at this point.

 

I'll re-install the plugin and add the commands back in. Will report back if there are any issues.

ok.. try and replicate it and let me know what happens

[ImportBot]

Originally Posted by poolacko*:

 

Unfortunately screen shots are not possible. When the PRoCon server began acting up, our GSP stepped in to remedy the situation. The plugins were copied off to a new folder and then PRoCon reinstalled. I have access to the old plugins folder if there is some nature of information that would be useful. Maybe a file that retains the settings between server restarts?

 

EDITED NOTE: Scratch that. I just took a look at the old plugins folder. Looks like someone went through it and cleaned out all of the non-original plugins. Nothing is available at this point.

 

I'll re-install the plugin and add the commands back in. Will report back if there are any issues.

ok.. try and replicate it and let me know what happens

Not working on my console. It worked out ok before the latest version of procon.

[ImportBot]

Originally Posted by Zaeed*:

 

Unfortunately screen shots are not possible. When the PRoCon server began acting up, our GSP stepped in to remedy the situation. The plugins were copied off to a new folder and then PRoCon reinstalled. I have access to the old plugins folder if there is some nature of information that would be useful. Maybe a file that retains the settings between server restarts?

 

EDITED NOTE: Scratch that. I just took a look at the old plugins folder. Looks like someone went through it and cleaned out all of the non-original plugins. Nothing is available at this point.

 

I'll re-install the plugin and add the commands back in. Will report back if there are any issues.

ok.. try and replicate it and let me know what happens

Not working on my console. It worked out ok before the latest version of procon.

Whats not working? What worked before?

[ImportBot]

Originally Posted by PanamaJim*:

 

CWG plugin re-installed on the PRoCon server and in use. It is the only non-original plugin running atm and no complaints from the GSP. We're going to let it run another day or two before we load up another plugin.

 

More and more I'm beginning to suspect that a corrupt plugin may be the reason we had the 100% CPU usage.

[ImportBot]

Originally Posted by poolacko*:

 

sorry for my bad English, not working on my console plugin version 1.0.0.0, plugin version 2.0.1.0.

 

 

[ImportBot]

Originally Posted by Zaeed*:

 

Hmmm those settings should work just fine..

 

You may want to extend the maximum distance to correctly capture long range shots into the uncap

[ImportBot]

Originally Posted by dmccart4*:

 

I'm having problems uploading the Custom Warning Generator to my ProCon server at Art of War. Here's what I did,

 

Uploaded CCustomWarningBuilder.inc in the plugins folder

Uploaded CCustomWarningBuilder.cs in the plugins/bfbc2 folder

Created a folder called packages in the root(as there wasn't one) and uploaded CCustomWarningBuilder.xml to it

 

The event log shows that the plugin loaded but it doesn't show up in the Parent Layer Control. I've uploaded 2 other plugins (weapons limiter and end of round stats) and they both show up it the Parent Layer Control. Can anybody see what I'm doing wrong?

[ImportBot]

Originally Posted by HelloKitty*:

 

..easy way should be: start your local procon; connect with all servers to the layer; click "packages" tab on the frontpage; select "Custom Warnings Generator"; click "install".

you should get responses like "downloading..." and "installing..." on your local procon. When everything is done, the plugin status should say "restart" - then restart your local procon AND the main layer. Finished. should work!

 

If not, delete all the files mentioned in YOUR last post locally and on the layer and retry the precedure above.

[ImportBot]

Originally Posted by dmccart4*:

 

thanks man, didn't know there was an auto install.

[ImportBot]

Originally Posted by Zaeed*:

 

Just an update..

 

I don't have access to a vietnam server atm, so I can't test if its working or not.. I'll post up an update in the next hour or so.

 

If you guys could test it for me that would be great

[ImportBot]

Originally Posted by Zaeed*:

 

Update: Version 2.0.1.0 -> 2.0.1.1

 

- Minor bug fix for Vietnam

- Some ground work for implementing feature that allows killing within a zone thats set to warn campers

 

I don't have the feature that allows you to kill people inside the zone that is set to 'Attacking From' but i've made a start.. I'll get it done when I can..

[ImportBot]

Originally Posted by JLe72*:

 

Just an update..

 

I don't have access to a vietnam server atm, so I can't test if its working or not.. I'll post up an update in the next hour or so.

 

If you guys could test it for me that would be great

Hi,

 

bad News, im testing new version, but "NVA Protection Zone" don't work :cry: .

I take my old settings and use new version...

[ImportBot]

Originally Posted by Zaeed*:

 

Just an update..

 

I don't have access to a vietnam server atm, so I can't test if its working or not.. I'll post up an update in the next hour or so.

 

If you guys could test it for me that would be great

Hi,

 

bad News, im testing new version, but "NVA Protection Zone" don't work :cry: .

I take my old settings and use new version...

Is that when you have it set to defend against people attacking a zone?

[ImportBot]

Originally Posted by Zaeed*:

 

Minor update, let me know how it goes.

[ImportBot]

Originally Posted by poolacko*:

 

Minor update, let me know how it goes.

update and not find it on the list of plugins! :shock:

[ImportBot]

Originally Posted by JLe72*:

 

Minor update, let me know how it goes.

update and not find it on the list of plugins! :shock:

Hi,

 

i have same problem, after updating to version 2.0.1.2, the plugin is not listed! :shock:

 

@Zaeed

Yes, Type = Zone being attacked

[ImportBot]

Originally Posted by Zaeed*:

 

It should be there.. The download counter might have been reset.. Filter on the word warning

[ImportBot]

Originally Posted by Sl4sh3r*:

 

Just tried to use this today. Procon is hosted on a layer and version 2.0.1.1 is on it and it's listed, but doesn't work.

 

 

Basic In-Game Info IS activated and it works.

I don't have !,@,#,/ before any of the commands.

When I type @help the commands are listed.

 

 

EDIT: Nevermind lol I'm an idiot. It works just fine. I was using it for a different purpose. I want someone to be able to type in a command like !ts and it'll output the TS Info. With this you need to type a name afterwards or it doesn't work. =P

[ImportBot]

Originally Posted by 173D*:

 

I'm getting this error....Compiling CCustomWarningBuilder.cs... Errors or Warnings

[10:17:23 57] CCustomWarningBuilder.cs (Line: 5471, C: 2) CS1038: #endregion directive expected

I downloaded the package thru procon and it gave that message. Deleted it from the procon folder and dl the zip and installed using that..same thing, can I find the old version somewhere?

[ImportBot]

Originally Posted by JLe72*:

 

It should be there.. The download counter might have been reset.. Filter on the word warning

Hi,

 

i use "Packages" to install new version and after this i copy the files manuel into the folders (new procon-working-folder too). Both times CWG is not listed in my plugins!

If procon is running, i'm missing the *.dll-file of CGW in my plugin-folder

 

 

...

Basic In-Game Info IS activated and it works.

I don't have !,@,#,/ before any of the commands.

When I type @help the commands are listed.

 

EDIT: Nevermind lol I'm an idiot. It works just fine. I was using it for a different purpose. I want someone to be able to type in a command like !ts and it'll output the TS Info. With this you need to type a name afterwards or it doesn't work. =P

I think you are in wrong Thread

[ImportBot]

Originally Posted by Zaeed*:

 

@Sl4sh3r

The plugin isn't designed to be used like that. Its meant for scenarios like an abusive player, you can make a command such as @abuse, which will warn players.

 

@everyone else

Thats most concerning.. I've got my vietnam server back, so i'll spend tomorrow looking into whats wrong with it.. (its 5am here atm)

[ImportBot]

Originally Posted by Zaeed*:

 

Ok. 2.0.2.0 is out.. I can confirm that it is all working now..

 

Let me know how it goes.

[ImportBot]

Originally Posted by JLe72*:

 

Ok. 2.0.2.0 is out.. I can confirm that it is all working now..

 

Let me know how it goes.

Hi,

 

nice work, CWG runs on both sides THX

 

After 3 hours testing and searching why it doesen't work on my Procon-Layer Server, i think found a bug in translation.

If my Layer-Server run's in "German > de.loc" CWG don't work, switching to "au.loc " it runs :? .

[ImportBot]

Originally Posted by Zaeed*:

 

Ok. 2.0.2.0 is out.. I can confirm that it is all working now..

 

Let me know how it goes.

Hi,

 

nice work, CWG runs on both sides THX

 

After 3 hours testing and searching why it doesen't work on my Procon-Layer Server, i think found a bug in translation.

If my Layer-Server run's in "German > de.loc" CWG don't work, switching to "au.loc " it runs :? .

Really? Thats a bit odd.. I didn't think localization affected plugin operation..

 

I'll look into it..

[ImportBot]

Originally Posted by JiiHoo*:

 

As this is my first post to this forum, I would like to start by thanking Zaeed for the plug-in. We have been using it extensively in our server for few months now and it has been a very important and necessary plug-in from our point of view. Keeps players behaving a bit better...

 

However, I have noticed a slight problem with it (version provided by our GSP is 2.0.1.0). We have few anti-camping rules active and several weapons specified for each of them as anti-camping weapons. But even though VehicleStationary is not selected as anti-camping weapon in any of the rules, players still get warnings for using at least VADS on anti-camping zone. I'm not quite sure whether this problem is present with other stationary weapons.

 

Any idea what might be the problem here?

[ImportBot]

Originally Posted by 173D*:

 

I'm having a problem with the plugin keeping the time limit set on temp bans. It always reverts to either 1 or 5 no matter what I set it to, within a few days it's back to one of those numbers.