ImportBot Posted November 9, 2013 Author Share Posted November 9, 2013 Originally Posted by Imisnew2*: Attachment 2656 This is the error I am getting the plugin isn't loading See "PRoCon Setup" on the plugin details tab or first post. It's because you didn't add the exception. Sent from my SCH-R530M using Tapatalk Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 9, 2013 Author Share Posted November 9, 2013 Originally Posted by Pvtjohntowle*: ] See "PRoCon Setup" on the plugin details tab or first post. It's because you didn't add the exception. Sent from my SCH-R530M using Tapatalk Errrmm Yes I did [ATTACH=CONFIG]2659[/ATTACH Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 9, 2013 Author Share Posted November 9, 2013 Originally Posted by Imisnew2*: Interesting. I'll have to take a closer look tomorrow Sent from my SCH-R530M using Tapatalk Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Pvtjohntowle*: I have asked my voice server provider (Enjin) to add my server IP (the one I connect with procon) to their whitelist and they confirm it has been done but I am still getting the following errors. [11:06:10 69] Ts3 Sync: [Error] Make sure your "Server Ip" and "Query Port" are correct. [11:06:10 70] Ts3 Sync: [Error] -4: An error occurred when trying to establish a connection. [11:06:10 72] Ts3 Sync: [Reconnect] Attempting to establish a new connection to the Teamspeak 3 Server. [11:06:10 74] Ts3 Sync: [Connection] Establishing a connection to a Teamspeak 3 Server. [11:06:12 24] Ts3 Sync: [Error] Fatal Error: [11:06:12 25] Ts3 Sync: [Error] You were temporarily banned from the Teamspeak 3 Server for flooding. [11:06:12 25] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist. [11:06:12 25] Ts3 Sync: [Error] 3329: connection failed, you are banned (you may retry in 379 seconds Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by almaxkiller*: I have asked my voice server provider (Enjin) to add my server IP (the one I connect with procon) to their whitelist and they confirm it has been done but I am still getting the following errors. [11:06:10 69] Ts3 Sync: [Error] Make sure your "Server Ip" and "Query Port" are correct. [11:06:10 70] Ts3 Sync: [Error] -4: An error occurred when trying to establish a connection. [11:06:10 72] Ts3 Sync: [Reconnect] Attempting to establish a new connection to the Teamspeak 3 Server. [11:06:10 74] Ts3 Sync: [Connection] Establishing a connection to a Teamspeak 3 Server. [11:06:12 24] Ts3 Sync: [Error] Fatal Error: [11:06:12 25] Ts3 Sync: [Error] You were temporarily banned from the Teamspeak 3 Server for flooding. [11:06:12 25] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist. [11:06:12 25] Ts3 Sync: [Error] 3329: connection failed, you are banned (you may retry in 379 seconds Hey, I am betting you are having the issue that I had had. I posted the solution here: myrcon.net/...teamspeak-3-sync#entry4661 BTW how are things working now? We spent quite a few hours getting your Layer working correctly. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Pvtjohntowle*: OK I have followed those instruction to get the Client IP and sent a request to my Voice Server host (Enjin) to add this IP to their whitelist. Thanks for your help.. Also I am running two instances of Procon concurrently , ie one on my desktop and one on my laptop, could this cause problems? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by almaxkiller*: Both connected to your layer? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Pvtjohntowle*: Both connected to your layer?I am not using Procon Layer anymore , I have had to change GSP due to internet attack , so I am just using the standalone program on both Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Hand-of-Shadow*: Quote Originally Posted by d4s_boese View Post The Plugin have a problem with xvotemap. I install both but nothing to see in Procon Client. I delete teamspeaksync ans votemap are in Procon. I dosent have logs für more infos. Gesendet von meinem C6603 mit Tapatalk I've got the same problem! I had xvotemap running vor two days, installed teamspeaksync and both plugins didn't show up in PRoCon! I deleted teamspeaksync, and votemap ist working again! Our GSP is gamed!de and i don't have acces to logs! Exactly the same problem here !!! Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Imisnew2*: I'll look at it more in depth later. I'm pretty tired right now.Investigating now. Definitly, we are having the same issue. Imisnew2 is already aware of this. Let's hope he van fix this soon Which issue was that? Not loading with xVoteMap? I've got the same problem! I had xvotemap running vor two days, installed teamspeaksync and both plugins didn't show up in PRoCon! I deleted teamspeaksync, and votemap ist working again! Our GSP is gamed!de and i don't have acces to logs! 1) You don't need to access the logs, simply look at the plugin console output.2) I cannot reproduce this on my local machine. Can anyone experiencing this problem reach out to me on Teamspeak? I have asked my voice server provider (Enjin) to add my server IP (the one I connect with procon) to their whitelist and they confirm it has been done but I am still getting the following errors. [11:06:10 69] Ts3 Sync: [Error] Make sure your "Server Ip" and "Query Port" are correct. [11:06:10 70] Ts3 Sync: [Error] -4: An error occurred when trying to establish a connection. [11:06:10 72] Ts3 Sync: [Reconnect] Attempting to establish a new connection to the Teamspeak 3 Server. [11:06:10 74] Ts3 Sync: [Connection] Establishing a connection to a Teamspeak 3 Server. [11:06:12 24] Ts3 Sync: [Error] Fatal Error: [11:06:12 25] Ts3 Sync: [Error] You were temporarily banned from the Teamspeak 3 Server for flooding. [11:06:12 25] Ts3 Sync: [Error] Make sure your Procon's Ip is in your Teamspeak 3 Server's Whitelist. [11:06:12 25] Ts3 Sync: [Error] 3329: connection failed, you are banned (you may retry in 379 seconds OK I have followed those instruction to get the Client IP and sent a request to my Voice Server host (Enjin) to add this IP to their whitelist. Thanks for your help.. Also I am running two instances of Procon concurrently , ie one on my desktop and one on my laptop, could this cause problems? You need to add the IP of the procon server, whether it be your local machine, or a gsp's machine. The easiest way to explain this is, if you were to try and connect to a Procon layer that is running the plugin, you need to add that ip to the Teamspeak 3 whitelist. Exactly the same problem here !!!As I said above, I cannot reproduce this on my local machine. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Imisnew2*: ] Errrmm Yes I did [ATTACH=CONFIG]2659[/ATTACH Are you sure that's the correct query port? The default is 10011, which is why it looks suspicious. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Hand-of-Shadow*: 2) i cannot reproduce this on my local machine. Can anyone experiencing this problem reach out to me on teamspeak?ip ? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Imisnew2*: ip ?I don't have a public Teamspeak. If you have one or something... Sent from my SCH-R530M using Tapatalk Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Hand-of-Shadow*: I don't have a public Teamspeak. If you have one or something... Sent from my SCH-R530M using Tapatalk >> Fighting-Rebels.eu Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Hand-of-Shadow*: Quote Originally Posted by d4s_boese View Post The Plugin have a problem with xvotemap. I install both but nothing to see in Procon Client. I delete teamspeaksync ans votemap are in Procon. I dosent have logs für more infos. Gesendet von meinem C6603 mit Tapatalk I've got the same problem! I had xvotemap running vor two days, installed teamspeaksync and both plugins didn't show up in PRoCon! I deleted teamspeaksync, and votemap ist working again! Our GSP is gamed!de and i don't have acces to logs! Bei mir im TS melden !!!! Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 10, 2013 Author Share Posted November 10, 2013 Originally Posted by Imisnew2*: Ok, the xVoteMap issue appears to be 2 problems colliding at once: 1- For whatever reason, TeamspeakSync is having an error. This is most likely because your plugin is running in a sandbox and it cannot make an outgoing connection to your Teamspeak 3 server. See the plugin details tab or first post of this thread on how to add an exception to Procon to allow plugins to make an outgoing connection. *** Note *** Your GSP has to allow the configuration files to be written to or else Procon will not allow the outgoing connection. 2- Procon doesn't load any plugins that it tries to load AFTER a plugin has failed. Since most systems will, by default, return files in alphabetical order, xVoteMap comes after TeamspeakSync. This causes xVoteMap to not load after Teamspeak sync errored out due to permission problems. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Pvtjohntowle*: Are you sure that's the correct query port? The default is 10011, which is why it looks suspicious.The query port according to the Enjin Admin Panel is 10001 [08:20:48 85] Ts3 Sync: [Error] Fatal Error: [08:20:48 85] Ts3 Sync: [Error] An error occurred during establishing a connection to the Teamspeak 3 Server. [08:20:48 86] Ts3 Sync: [Error] [08:20:48 86] Ts3 Sync: [Error] -4: An error occurred when trying to establish a connection. [08:20:48 86] Ts3 Sync: [Reconnect] Failed attempt 19 out of 20. [08:21:18 87] Ts3 Sync: [Connection] Establishing a connection to a Teamspeak 3 Server. [08:21:18 87] Ts3 Sync: [Error] Fatal Error: [08:21:18 88] Ts3 Sync: [Error] An error occurred during establishing a connection to the Teamspeak 3 Server. [08:21:18 88] Ts3 Sync: [Error] Make sure your "Server Ip" and "Query Port" are correct. [08:21:18 88] Ts3 Sync: [Error] -4: An error occurred when trying to establish a connection. [08:21:18 89] Ts3 Sync: [Reconnect] Failed the last attempt.. [08:21:18 89] Ts3 Sync: [Disabled] Requesting Teamspeak 3 Sync to stop... [08:21:18 90] Ts3 Sync: [Closing] Shutting down Teamspeak 3 Sync. [08:21:18 91] Ts3 Sync: [Closing] Cleaning up resources. [08:21:18 91] Ts3 Sync: [Closing] Teamspeak 3 Sync stopped. Attachment 2669 7/11/2013 6:32:01 AM VirtualServer Info listening on 216.157.85.20:11549 Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Imisnew2*: The query port according to the Enjin Admin Panel is 10001 [08:20:48 85] Ts3 Sync: [Error] Fatal Error: [08:20:48 85] Ts3 Sync: [Error] An error occurred during establishing a connection to the Teamspeak 3 Server. [08:20:48 86] Ts3 Sync: [Error] [08:20:48 86] Ts3 Sync: [Error] -4: An error occurred when trying to establish a connection. [08:20:48 86] Ts3 Sync: [Reconnect] Failed attempt 19 out of 20. [08:21:18 87] Ts3 Sync: [Connection] Establishing a connection to a Teamspeak 3 Server. [08:21:18 87] Ts3 Sync: [Error] Fatal Error: [08:21:18 88] Ts3 Sync: [Error] An error occurred during establishing a connection to the Teamspeak 3 Server. [08:21:18 88] Ts3 Sync: [Error] Make sure your "Server Ip" and "Query Port" are correct. [08:21:18 88] Ts3 Sync: [Error] -4: An error occurred when trying to establish a connection. [08:21:18 89] Ts3 Sync: [Reconnect] Failed the last attempt.. [08:21:18 89] Ts3 Sync: [Disabled] Requesting Teamspeak 3 Sync to stop... [08:21:18 90] Ts3 Sync: [Closing] Shutting down Teamspeak 3 Sync. [08:21:18 91] Ts3 Sync: [Closing] Cleaning up resources. [08:21:18 91] Ts3 Sync: [Closing] Teamspeak 3 Sync stopped. Attachment 2669 7/11/2013 6:32:01 AM VirtualServer Info listening on 216.157.85.20:11549 Then, back to the original problem: you're getting banned from teamspeak, right? Are you running the plugin on your local machine or on a procon layer? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Imisnew2*: My plan was to have the drop-off channel be one of the pick up channels. Not sure if that could cause some "loop" that I was experiencing earlier.So, I need more information. Current plugin: Staging channel = Pickup Channel + Dropoff Channel + Intermission Swapping Channel. You Want: Staging channel = Pickup Channel + Intermission Swapping Channel. Other channel = Pickup Channel + Dropoff Channel Correct? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Pvtjohntowle*: Then, back to the original problem: you're getting banned from teamspeak, right? Are you running the plugin on your local machine or on a procon layer? No I am not seeing the banned message anymore, just the one I pasted, It is red text in colour. I am running the plugin from my local machine only. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Jaythegreat1*: So, I need more information. Current plugin: Staging channel = Pickup Channel + Dropoff Channel + Intermission Swapping Channel. You Want: Staging channel = Pickup Channel + Intermission Swapping Channel. Other channel = Pickup Channel + Dropoff Channel Correct? Let me get back with you on it. Trying to see how the guys / gals here want to use it. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Imisnew2*: No I am not seeing the banned message anymore, just the one I pasted, It is red text in colour. I am running the plugin from my local machine only.Well, I like the banned message better. It means you at least had the right IP/Port for a Teamspeak 3 server. It also means that you probably just weren't whitelisting the correct IP. If all we're getting is this message now (and nothing else has changed), then it means your teamspeak 3 server is down or has changed it's query port number / ip. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Imisnew2*: Update released: Teamspeak 3 Sync - 1.0.3.0 Fixed an issue where a player may get swapped between channels repeatedly. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Pvtjohntowle*: Well, I like the banned message better. It means you at least had the right IP/Port for a Teamspeak 3 server. It also means that you probably just weren't whitelisting the correct IP. If all we're getting is this message now (and nothing else has changed), then it means your teamspeak 3 server is down or has changed it's query port number / ip. Server Type: TeamSpeak 3 Max users (slots): 35 Server Status: status Online Server Address: bf4banditos.enjinvoice.com IP Address: west1.ts3.enjin.com Port: 11549 Query Port: 10001 (_) Location: US WEST If you are using ServerQuery you may need to whitelist the IP of the script accessing the Query Port. Please open a ticket with Enjin Support to request a specific IP address whitelisted. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Imisnew2*: Server Type: TeamSpeak 3 Max users (slots): 35 Server Status: status Online Server Address: bf4banditos.enjinvoice.com IP Address: west1.ts3.enjin.com Port: 11549 Query Port: 10001 (_) Location: US WEST If you are using ServerQuery you may need to whitelist the IP of the script accessing the Query Port. Please open a ticket with Enjin Support to request a specific IP address whitelisted. Your screenshot from before isn't using the address listed. You should be using bf4banditos.enjinvoice.com Sent from my SCH-R530M using Tapatalk Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Jaythegreat1*: So we've kinda ditched that idea since community players didn't care too much about the locked channels. I've gotten 1 request from them.... if they were dragged from one our pubbing channels to one of the server channels. Would it possible that if they left server channel back to the pubbing channel, they would not be moved again. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Imisnew2*: So we've kinda ditched that idea since community players didn't care too much about the locked channels. I've gotten 1 request from them.... if they were dragged from one our pubbing channels to one of the server channels. Would it possible that if they left server channel back to the pubbing channel, they would not be moved again. That would require a bit of work. I recommend not having those pub channels as pick up channels. Sent from my SCH-R530M using Tapatalk Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Jaythegreat1*: Figured much... since it looks like were kinda going full circle here. Is there a way to ensure the channel doesn't start to split up unless there are x amount of players on each team? That way we don't end up with 6v1, 7v1, etc? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Imisnew2*: Figured much... since it looks like were kinda going full circle here. Is there a way to ensure the channel doesn't start to split up unless there are x amount of players on each team? That way we don't end up with 6v1, 7v1, etc?That's what it used to do :x. You can add that logic back if you want that too. Sent from my SCH-R530M using Tapatalk Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted November 11, 2013 Author Share Posted November 11, 2013 Originally Posted by Jaythegreat1*: I verified the coding is back in since I updated to the latest version. However, it has 1 person in by themselves. I'm on our TS atm if you want to check it out. EDIT: Pulling up an old post. This seems to suggest that it's NOT a per team thing, however. You could add support for this by changing Code: getPlayersOnBothServers().Count to Code: getPlayersOnBothServersOnTeam(client.GmClient.Team Id).Count I just added this option. While it leaves the guys with Attached Files: TS3Sync.JPG Quote * Restored post. It could be that the author is no longer active. Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.