Advanced In-Game Admin and Ban Enforcer - AdKats

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Hi ColColonCLeaner

 

So if i read everything correct i need xpkillers chat, Guid and stats Logger. I used his plugin already for BF3 so its not a problem to install it. My question is about the MYSQL Database for the Plugins...so when i use a Database with name "64cqbf4" for xpkillers Plugin, then i need to setup AdKats to use the same Database "64cqbf4" as XPkillers Plugin or AdKats will not work? And your Script i need to run before xpkillers Plugin is working on that DB?

 

Thanks for the grat work

You should have 1 database for all of your servers, but if you are running them separately you need to install stat logger then install AdKats.

[ImportBot]

Originally Posted by Pvtjohntowle*:

 

My GSP changed my IP and port and Adkats and Procon Chat GUID and Stats Logger no longer work. The details for the SQL database were blank. I managed to put them back in again but now I get this message

 

[21:04:06 09] [xVotemap] Info: Estimated voting start in 2 hours, 42 minutes, 39 seconds @ 11:46:45 PM

[21:04:25 41] [AdKats] Waiting a few seconds for requirements and other plugins to initialize, please wait...

[21:04:30 46] [AdKats] Initializing AdKats 3.7.0.1 components.

[21:04:30 46] [AdKats] SUCCESS: Server IP is 203.46.105.22:23075!

[21:04:30 48] [AdKats] Attempting database connection. Attempt 1 of 5.

[21:04:30 48] [AdKats] SUCCESS: Database connection open.

[21:04:30 49] [AdKats] ERROR: Main Record table not present in the database.

[21:04:30 49] [AdKats] ERROR: For this release the adkats database setup script must be run manually. Run the script then restart AdKats.

[21:04:30 60] [AdKats] AdKats 3.7.0.1 Disabled! =(

[21:04:36 14] [xVotemap] Info: Estimated voting start in 2 hours, 42 minutes, 39 seconds @ 11:47:15 PM

[ImportBot]

Originally Posted by Moli87*:

 

Hy COL.

 

I have ADKats now up and running on my layer. Can you tell my how i can open now a closed/privat squad?

 

really a lot of features.. i need too look deeper into the settings

 

Thanks for this great work!

 

Greez

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Hy COL.

 

I have ADKats now up and running on my layer. Can you tell my how i can open now a closed/privat squad?

 

really a lot of features.. i need too look deeper into the settings

 

Thanks for this great work!

 

Greez

Use @join playername. If you are access level 0-4 using that command will unlock the target squad and place you in it. Be mindful that if you are alive when using the command the system will slay you to perform the move.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

My GSP changed my IP and port and Adkats and Procon Chat GUID and Stats Logger no longer work. The details for the SQL database were blank. I managed to put them back in again but now I get this message

 

[21:04:06 09] [xVotemap] Info: Estimated voting start in 2 hours, 42 minutes, 39 seconds @ 11:46:45 PM

[21:04:25 41] [AdKats] Waiting a few seconds for requirements and other plugins to initialize, please wait...

[21:04:30 46] [AdKats] Initializing AdKats 3.7.0.1 components.

[21:04:30 46] [AdKats] SUCCESS: Server IP is 203.46.105.22:23075!

[21:04:30 48] [AdKats] Attempting database connection. Attempt 1 of 5.

[21:04:30 48] [AdKats] SUCCESS: Database connection open.

[21:04:30 49] [AdKats] ERROR: Main Record table not present in the database.

[21:04:30 49] [AdKats] ERROR: For this release the adkats database setup script must be run manually. Run the script then restart AdKats.

[21:04:30 60] [AdKats] AdKats 3.7.0.1 Disabled! =(

[21:04:36 14] [xVotemap] Info: Estimated voting start in 2 hours, 42 minutes, 39 seconds @ 11:47:15 PM

You need to run the AdKats sql setup script on your database again. You will find that link to it in the installation instructions.

[ImportBot]

Originally Posted by p19blo*:

 

is there a way to make someone an admin via ingame

 

example

 

!op p19blo 1

 

!op admin

 

p19blo username

 

1 access level

 

 

if this is possible, is there a way to make a time limit on this too ? like make someone admin for 12 hours etc ?

 

just an idea someone asked me.

[ImportBot]

Originally Posted by Pvtjohntowle*:

 

You need to run the AdKats sql setup script on your database again. You will find that link to it in the installation instructions.

I did that copied and pasted into the window on mtsql server and clicked the icon at top. I still get this error.

 

So either I am pressing the wrong button or pasting it into the wrong window.

 

Sent from my GT-I9300 using Tapatalk

[ImportBot]

Originally Posted by rbtmarshall*:

 

You need to install using the BF4 install instructions linked at the beginning of this thread, the one in massive red letters. There is not an official version released for BF4 yet, so that is the beta until a stable version is released.

Funny reply.. I went to give this plugin another try since I have the PRoCon chat installed, and still have the same question it says to install like any other plugin.

 

I googled adkats plugin install folder and found this reply.

 

here is what the INSTRUCTIONS say.

Add plugin file to procon. Add the plugin file to procon as you would any other, in either the plugins/BF3 or plugins/BF4 folder depending on which game your layer is running on.

Do all the files in the folder go into the bf4 plugins folder, or does the folder containing all the files go into the plugin folder.

 

 

 

To others who may reach the same question. Just copy all the files in the download folder for the plugin, and put all the files into the bf4 plugin folder.

 

 

By the way. thank you for the plugin, it's running for me, and seems to have allot of useful functions.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Funny reply.. I went to give this plugin another try since I have the PRoCon chat installed, and still have the same question it says to install like any other plugin.

 

I googled adkats plugin install folder and found this reply.

 

here is what the INSTRUCTIONS say.

 

 

Do all the files in the folder go into the bf4 plugins folder, or does the folder containing all the files go into the plugin folder.

 

 

 

To others who may reach the same question. Just copy all the files in the download folder for the plugin, and put all the files into the bf4 plugin folder.

 

 

By the way. thank you for the plugin, it's running for me, and seems to have allot of useful functions.

Sorry if the instructions are not specific enough, what i mean by "plugin file" is the AdKats.cs file. That file is what needs to go in the plugins/BF3 or plugins/BF4 folder. The other files are not required. Perhaps i should remove those files so people don't get confused. Thanks for the feedback, and glad you got it working.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

is there a way to make someone an admin via ingame

 

example

 

!op p19blo 1

 

!op admin

 

p19blo username

 

1 access level

 

 

if this is possible, is there a way to make a time limit on this too ? like make someone admin for 12 hours etc ?

 

just an idea someone asked me.

Please submit all enhancement requests or bugs using the link given in the first post.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

I did that copied and pasted into the window on mtsql server and clicked the icon at top. I still get this error.

 

So either I am pressing the wrong button or pasting it into the wrong window.

 

Sent from my GT-I9300 using Tapatalk

Check your database for the adkats_records table. If that table is not there then you haven't run the setup script properly.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

In the near future the way admins are given their powers in AdKats will be completely revamped.

 

Access Classes will be created by the head admin, each class will be given a name and a list of commands it can use. By default there will be 2 classes ("Admin", and "Guest"). The "Guest" class will be automatically given to every player entering the server, and will have access to !admin, !report, !voip, !rules, !join, !killme, !yes, and !no. The "Admin" class will have access to all commands.

 

Classes can be edited/added/deleted to your desires, but the default "Guest" class cannot be deleted.

[ImportBot]

Originally Posted by Pvtjohntowle*:

 

Check your database for the adkats_records table. If that table is not there then you haven't run the setup script properly.

Well can you tell me how to run it properly? I have no idea how to use this SQL editor or MySQL Workbench.. That would be a great help moving forward. Can you connect to my computer again and sort this out for me maybe? I have tried to get this working as below. I have gone as far as I can and I am still getting the same error message.

 

 

Attachment 2751

 

http://youtu.be/uElvgJjCF6E

 

Attached Files:

• bandicam 2013-11-22 21-59-16-519.jpg

[ImportBot]

Originally Posted by rbtmarshall*:

 

Im trying to look around, but have a question. Can you use the punish command in other plugins? say for example i have procon rules kicking someone that uses RPG to kill, can i instead use punish to replace kill so that adkats punish system is used? (eg: kill on first warning, kick on second, temp ban, etc...)

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Im trying to look around, but have a question. Can you use the punish command in other plugins? say for example i have procon rules kicking someone that uses RPG to kill, can i instead use punish to replace kill so that adkats punish system is used? (eg: kill on first warning, kick on second, temp ban, etc...)

I can connect again this weekend at some point. Either that or just PM me your database creds and i'll set it up for you, no need to teamviewer.

 

And no, unfortunately there is no way to access the punish system outside of AdKats. However, insane limits is being updated to allow plugin interaction, so i will eventually be able to allow this. I'm not sure when the change will go through, but he is working on it.

[ImportBot]

Originally Posted by Demetri*:

 

Hi i am getting this.

i says success to my server ip. it has all the correct details for the db and they have whitelisted the ipaddress for my procon layer. wierd please help

 

[18:49:54 28] [AdKats] Waiting a few seconds for requirements and other plugins to initialize, please wait...

[18:49:59 28] [AdKats] Initializing AdKats 3.7.0.1 components.

[18:49:59 28] [AdKats] SUCCESS: Server IP is 173.199.77.247:30000!

[18:50:20 29] [AdKats] ERROR: Connection failed on attempt 1. Retrying in 5 seconds.

[18:50:46 30] [AdKats] ERROR: Connection failed on attempt 2. Retrying in 5 seconds.

[18:51:12 32] [AdKats] ERROR: Connection failed on attempt 3. Retrying in 5 seconds.

[18:51:38 32] [AdKats] ERROR: Connection failed on attempt 4. Retrying in 5 seconds.

[18:52:04 33] [AdKats] ERROR: Connection failed on attempt 5. Retrying in 5 seconds.

[18:52:09 33] [AdKats] ERROR: Database connection FAILED with EXCEPTION. Bad credentials, invalid hostname, or invalid port.

[18:52:09 36] [AdKats] AdKats 3.7.0.1 Disabled! =(

[ImportBot]

Originally Posted by rbtmarshall*:

 

Demetri, Did PRoCon Chat database setup work for you on this same server?

[ImportBot]

Originally Posted by FFFRobinHood*:

 

Hi there, I'm with Demetri.

 

I setup the mysql db though cPanel on our websites server as per the instructions. Created a user associated with that DB, granted them all permissions.

 

Ran the script, pretty sure it setup alright

 

daENIMW.png

 

 

 

We have bought Procon from GameServers. Using the IP address from the procon page on our GamerServers account I've whitelisted it at WHM and cPanel level on our VPS.

 

So in WHM I've gone to Additional MySQL Access Hosts and added the Procon IP.

I've then gone to the ConfigServer Security & Firewall - csf v6.37 page and quick allowed the same IP.

I've then gone into the cPanel for our site and added an entry for the ip in Remote Database Access Hosts

 

Back in WHM I've then opened up the port 3306 in the firewall configuration by adding 3306 to the TCP_IN and TCP_OUT allowed lists.

 

Then logging into procon using gameservers procon IP address, and my user name and pass.

 

Try to activate the plugin using the following details

 

mysql host name: fffsquad.com

mysql port: 3306

mysql database: [redacted]

mysql username: [redacted]

mysql password: [redacted]

 

 

Resulting in

 

Database connection FAILED with EXCEPTION. Bad credentials, invalid hostname, or invalid port.

 

 

Any ideas? Thanks!

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Hi there, I'm with Demetri.

 

I setup the mysql db though cPanel on our websites server as per the instructions. Created a user associated with that DB, granted them all permissions.

 

Ran the script.

 

We have bought Procon from GameServers. Using the IP address from the procon page on our GamerServers account I've whitelisted it at WHM and cPanel level on our VPS.

 

So in WHM I've gone to Additional MySQL Access Hosts and added the Procon IP.

I've then gone to the ConfigServer Security & Firewall - csf v6.37 page and quick allowed the same IP.

I've then gone into the cPanel for our site and added an entry for the ip in Remote Database Access Hosts

 

Back in WHM I've then opened up the port 3306 in the firewall configuration by adding 3306 to the TCP_IN and TCP_OUT allowed lists.

 

Then logging into procon using gameservers procon IP address, and my user name and pass.

 

Try to activate the plugin using the following details

 

mysql host name: fffsquad.com

mysql port: 3306

mysql database: [redacted]

mysql username: [redacted]

mysql password: [redacted]

 

 

Resulting in

 

Database connection FAILED with EXCEPTION. Bad credentials, invalid hostname, or invalid port.

 

 

Any ideas? Thanks!

Have you tried running the stat logger plugin using the same pattern? For one it's required before AdKats will run, and for two i "Prettify" the error but stat logger shows the whole thing, so you might be able to get more info about what the error is by using that plugin to test.

 

Basically, install that plugin (linked the the AdKats dependencies section), add all the database creds, and enable it. It will say enabled in green letters, but after a few seconds you should see red text with the errors showing up in console. Once you see that quick disable the plugin so it doesn't keep spamming the console with errors, then see what it is saying the real problem is.

[ImportBot]

Originally Posted by FFFRobinHood*:

 

Ahh, I'm really sorry, I didn't check that bit, I was only asked to setup the DB.

 

I've just installed the plugin to procon and restarted the server. I entered all the previous db details to the PRoCon Chat plugin.

 

First time I tried it I got an error

 

[20:03:51 62] PRoCon Chat, GUID and Stats Logger Enabled

[20:03:51 62] PRoCon Chat, GUID and Stats Logger: Floodprotection set to 10 Request per Round for each Player

[20:03:54 96] Error in Tablebuilder:

[20:03:54 96] Message: Host '173.199.72.4' is not allowed to connect to this MySQL server

[20:03:54 96] Native: -2147467259

[20:03:54 96] Source: MySql.Data

[20:03:54 96] StackTrace: at MySql.Data.MySqlClient.MySqlStream.ReadPacket()..

...

 

 

 

I'm not sure where that IP address came from? 173.199.72.4

It's not the one listed in the GameServers acccount and it's not my home IP :-/

Where was I supposed to find that?

 

I've updated WHM and cPanel to allow that IP though and it seemed to let me enable PRoCon Chat and AdKats

 

 

 

 

[20:07:18 26] PRoCon Chat, GUID and Stats Logger Enabled

[20:07:18 26] PRoCon Chat, GUID and Stats Logger: Floodprotection set to 10 Request per Round for each Player

[20:07:42 93] [AdKats] Waiting a few seconds for requirements and other plugins to initialize, please wait...

[20:07:47 93] [AdKats] Initializing AdKats 3.7.0.1 components.

[20:07:47 93] [AdKats] SUCCESS: Server IP is 173.199.77.247:30000!

[20:07:48 59] [AdKats] Attempting database connection. Attempt 1 of 5.

[20:07:48 66] [AdKats] SUCCESS: Database connection open.

[20:07:49 51] [AdKats] WARNING: Updating your chat log table with player IDs. This may take some time if you have many records! Be patient!

[20:07:50 43] [AdKats] SUCCESS: Chat log player IDs added.

[20:07:52 30] [AdKats] SUCCESS: Database confirmed functional for AdKats use.

[20:07:52 79] [AdKats] WARNING: No admins in the admin table.

[20:07:53 72] [AdKats] SUCCESS: Database Server Info Fetched. Server ID is 1!

[20:07:54 34] [AdKats] ERROR: Settings could not be loaded. Server 1 invalid.

[20:08:19 51] [AdKats] WARNING: No admins in the admin table.

[20:08:19 54] [AdKats] Enabled! Version: 3.7.0.1

[20:09:24 43] [MULTIbalancer]:2 FINAL STATUS FOR PREVIOUS ROUND:

[20:09:24 43] [MULTIbalancer]:0 Status: Map = Lancang Dam, mode = Conquest Large, time in round = 00:08:16, tickets = 241/0

[20:09:24 43] [MULTIbalancer]:0 Status: Ticket difference = 241, ticket ratio percentage is 5000%

[20:09:24 43] [MULTIbalancer]:0 Status: 0/6 raged, 0 reassigned, 0 balanced, 0 unstacked, 0 unswitched, 1 excluded, 0 exempted, 0 failed; of 109 TOTAL

[20:09:24 43] [MULTIbalancer]:0 Status: Team counts [28] = 14(US) vs 14(RU), with 2 unassigned

[20:09:24 43] [MULTIbalancer]:2 +------------------------------------------------+

[20:10:50 16] [AdKats] WARNING: No admins in the admin table.

[20:10:51 00] [AdKats] WARNING: No admins in the admin table.

[20:10:51 83] [AdKats] WARNING: No admins in the admin table.

 

 

Do I need to action something with regards to the no admins in the admin table error?

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Ahh, I'm really sorry, I didn't check that bit, I was only asked to setup the DB.

 

I've just installed the plugin to procon and restarted the server. I entered all the previous db details to the PRoCon Chat plugin.

 

First time I tried it I got an error

 

[20:03:51 62] PRoCon Chat, GUID and Stats Logger Enabled

[20:03:51 62] PRoCon Chat, GUID and Stats Logger: Floodprotection set to 10 Request per Round for each Player

[20:03:54 96] Error in Tablebuilder:

[20:03:54 96] Message: Host '173.199.72.4' is not allowed to connect to this MySQL server

[20:03:54 96] Native: -2147467259

[20:03:54 96] Source: MySql.Data

[20:03:54 96] StackTrace: at MySql.Data.MySqlClient.MySqlStream.ReadPacket()..

...

 

 

 

I'm not sure where that IP address came from? 173.199.72.4

It's not the one listed in the GameServers acccount and it's not my home IP :-/

Where was I supposed to find that?

 

I've updated WHM and cPanel to allow that IP though and it seemed to let me enable PRoCon Chat and AdKats

 

 

 

 

[20:07:18 26] PRoCon Chat, GUID and Stats Logger Enabled

[20:07:18 26] PRoCon Chat, GUID and Stats Logger: Floodprotection set to 10 Request per Round for each Player

[20:07:42 93] [AdKats] Waiting a few seconds for requirements and other plugins to initialize, please wait...

[20:07:47 93] [AdKats] Initializing AdKats 3.7.0.1 components.

[20:07:47 93] [AdKats] SUCCESS: Server IP is 173.199.77.247:30000!

[20:07:48 59] [AdKats] Attempting database connection. Attempt 1 of 5.

[20:07:48 66] [AdKats] SUCCESS: Database connection open.

[20:07:49 51] [AdKats] WARNING: Updating your chat log table with player IDs. This may take some time if you have many records! Be patient!

[20:07:50 43] [AdKats] SUCCESS: Chat log player IDs added.

[20:07:52 30] [AdKats] SUCCESS: Database confirmed functional for AdKats use.

[20:07:52 79] [AdKats] WARNING: No admins in the admin table.

[20:07:53 72] [AdKats] SUCCESS: Database Server Info Fetched. Server ID is 1!

[20:07:54 34] [AdKats] ERROR: Settings could not be loaded. Server 1 invalid.

[20:08:19 51] [AdKats] WARNING: No admins in the admin table.

[20:08:19 54] [AdKats] Enabled! Version: 3.7.0.1

[20:09:24 43] [MULTIbalancer]:2 FINAL STATUS FOR PREVIOUS ROUND:

[20:09:24 43] [MULTIbalancer]:0 Status: Map = Lancang Dam, mode = Conquest Large, time in round = 00:08:16, tickets = 241/0

[20:09:24 43] [MULTIbalancer]:0 Status: Ticket difference = 241, ticket ratio percentage is 5000%

[20:09:24 43] [MULTIbalancer]:0 Status: 0/6 raged, 0 reassigned, 0 balanced, 0 unstacked, 0 unswitched, 1 excluded, 0 exempted, 0 failed; of 109 TOTAL

[20:09:24 43] [MULTIbalancer]:0 Status: Team counts [28] = 14(US) vs 14(RU), with 2 unassigned

[20:09:24 43] [MULTIbalancer]:2 +------------------------------------------------+

[20:10:50 16] [AdKats] WARNING: No admins in the admin table.

[20:10:51 00] [AdKats] WARNING: No admins in the admin table.

[20:10:51 83] [AdKats] WARNING: No admins in the admin table.

 

 

Do I need to action something with regards to the no admins in the admin table error?

That warning just means you haven't added any admins yet. Add an admin soldier by typing their name into the "Add Access" field, then modifying their access level to what is desired.

[ImportBot]

Originally Posted by XpKiller*:

 

@FFFRobinHood

 

you need to setup your mysql user correctly:

 

For host '173.199.72.4 ' only:

GRANT ALL ON yourDB.* TO 'yourUser'@'173.199.72.4' IDENTIFIED BY 'yourPassword';

FLUSH PRIVILEGES;

[code=auto:0]
 

For every ip/hostname:

[code=auto:0]

GRANT ALL ON yourDB.* TO 'yourUser'@'%' IDENTIFIED BY 'yourPassword';

FLUSH PRIVILEGES;

[code=auto:0]

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

@FFFRobinHood

 

you need to setup your mysql user correctly:

 

For host '173.199.72.4 ' only:

GRANT ALL ON yourDB.* TO 'yourUser'@'173.199.72.4' IDENTIFIED BY 'yourPassword';

FLUSH PRIVILEGES;

[code=auto:0]
 

For every ip/hostname:

[code=auto:0]

GRANT ALL ON yourDB.* TO 'yourUser'@'%' IDENTIFIED BY 'yourPassword';

FLUSH PRIVILEGES;

[code=auto:0]
He got it sorted, the issue was for some reason the IP procon was using was not the same one listed on his gameservers.com panel (why would that be_). So basically he whitelisted the wrong IP until stat logger told him the right one.

[ImportBot]

Originally Posted by AgentHawk*:

 

I try to switch my Database....but they says:

[15:11:30 53] [AdKats] ERROR: Database Server info could not be fetched! Make sure XpKiller's Stat Logger is running on this server!

 

maybe its needs a little bit time_!

 

Edit:

Worked

[ImportBot]

Originally Posted by jking54*:

 

In the near future the way admins are given their powers in AdKats will be completely revamped.

 

Access Classes will be created by the head admin, each class will be given a name and a list of commands it can use. By default there will be 2 classes ("Admin", and "Guest"). The "Guest" class will be automatically given to every player entering the server, and will have access to !admin, !report, !voip, !rules, !join, !killme, !yes, and !no. The "Admin" class will have access to all commands.

 

Classes can be edited/added/deleted to your desires, but the default "Guest" class cannot be deleted.

Hey C3, I may have missed it in the manual but what proper rights would/should a server owner give to their admins?

[ImportBot]

Originally Posted by LumPenPacK*:

 

Is there anything I have to change in my DB with the last update?

I get some exceptions with Adkats now:

 

[20:03:14 78] [statslogger]Error: Error in RegisterAllCommands: System.InvalidOperationException: Die Auflistung wurde geändert. Der Enumerationsvorgang kann möglicherweise nicht ausgeführt werden.

bei System.ThrowHelper.ThrowInvalidOperationException( ExceptionResource resource)

bei System.Collections.Generic.Dictionary`2.Enumerator .MoveNext()

bei PRoConEvents.CChatGUIDStatsLogger.RegisterAllComma nds()

It says it's an StatsLogger error but I only get these exceptions when Adkats is enabled.

[ImportBot]

Originally Posted by Pvtjohntowle*:

 

Can you help me with running this script on my SQL server? So I can get this Adkats working again? Thanks

[ImportBot]

Originally Posted by rbtmarshall*:

 

Can you help me with running this script on my SQL server? So I can get this Adkats working again? Thanks

Im not sure if all interfaces are the same, but heres what I did on my VPS at Hostgator.

From the WHM panel I went into PHP myadmin, found the database, click on the SQL tab and copy & pasted that script into the php script box, then click go

don't know if that's the best way, but it worked for me

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Can you help me with running this script on my SQL server? So I can get this Adkats working again? Thanks

PM me your DB credentials and i'll do it.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Is there anything I have to change in my DB with the last update?

I get some exceptions with Adkats now:

 

 

 

It says it's an StatsLogger error but I only get these exceptions when Adkats is enabled.

This is a known error. A variable in stat logger isnt thread safe, so it throws those errors when AdKats changes its settings. Killer knows about it and will have it fixed in a new release soon.