Advanced In-Game Admin and Ban Enforcer - AdKats

[ImportBot]

Originally Posted by JR8355*:

 

PlayerA reports PlayerB for ReasonA

AdKats generates 3 digit ID for report. e.g. 825

 

All Online Admins > Report [825]: PlayerA reported PlayerB for ReasonA

 

Options:

 

AdminA acts on report using report ID in any command. kill, kick, ban, etc...

@kill 825

PlayerA > Your report has been acted on. Thank you.

AdminA > You KILLED PlayerB for ReasonA

PlayerA's report gets confirmed, and they are closer to having admin assistant status if you enabled that.

 

AdminA accepts the report but does not take action.

/accept 825

PlayerA > Your report [825] has been accepted. Thank you.

AdminA > Report [825] has been accepted.

PlayerA's report gets confirmed, and they are closer to having admin assistant status if you enabled that.

 

AdminA denies the report as it is incorrect.

/deny 825

PlayerA > Your report [825] has been denied.

AdminA > Report [825] has been denied.

PlayerA's report gets denied, their stats for admin assistant are not affected.

This is very helpful, thank you. I am still not receiving emails and getting several reports periodically and need to get this resolved. I can't figure out why I am not getting any, settings seem correct, I changed ports as you've suggested and my email works with those ports but yet I receive no emails related to reports.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

This is very helpful, thank you. I am still not receiving emails and getting several reports periodically and need to get this resolved. I can't figure out why I am not getting any, settings seem correct, I changed ports as you've suggested and my email works with those ports but yet I receive no emails related to reports.

Change debug level to 1. Do you see "A notification email has been sent." when a report happens?

[ImportBot]

Originally Posted by JR8355*:

 

Change debug level to 1. Do you see "A notification email has been sent." when a report happens?

I actually had debug on 2 and saw nothing

 

I run my Gmail thru Outlook and the suggested ports are 993 and 465 for incoming (imap) and outgoing (smtp) respectively. I've tried 465 and 587 and same result with smtp

 

[10:56:37 43] [AdKats] REPORT [694] sent on JR8355 for testing

 

no errors in log

[ImportBot]

Originally Posted by Jamesonp*:

 

I actually had debug on 2 and saw nothing

 

I run my Gmail thru Outlook and the suggested ports are 993 and 465 for incoming (imap) and outgoing (smtp) respectively. I've tried 465 and 587 and same result with smtp

 

[10:56:37 43] [AdKats] REPORT [694] sent on JR8355 for testing

 

no errors in log

Did you turn SSL on for gmail?

[ImportBot]

Originally Posted by JR8355*:

 

Did you turn SSL on for gmail?

Yep, I've had this set since day one in my email since I use Outlook with Gmail, it has to be on. I also have it on in email settings in AdKats

[ImportBot]

Originally Posted by JR8355*:

 

Quick question on DPS Auto bans, how is it computed form the nomenclature of the ban? I got this ban yesterday, one of the few that I've gotten so far and wondered how to read it. From the weapons stats list, this one seems a no brainer, but the guy is swearing up and down, not to mention at me for it

 

"id":"ace-52-cqb",

"damage_max":34,

"damage_min":20

 

his max damage is 72? So if I read this right, 72/34=2.11 or a 211%? From the AdKats docs, it would appear that this individual has a HS% of 136/150=.9066 or ~91% rate, wow!

 

DPS Automatic Ban [ACE52CQB-72-150-136]

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Quick question on DPS Auto bans, how is it computed form the nomenclature of the ban? I got this ban yesterday, one of the few that I've gotten so far and wondered how to read it. From the weapons stats list, this one seems a no brainer, but the guy is swearing up and down, not to mention at me for it

 

"id":"ace-52-cqb",

"damage_max":34,

"damage_min":20

 

his max damage is 72? So if I read this right, 72/34=2.11 or a 211%? From the AdKats docs, it would appear that this individual has a HS% of 136/150=.9066 or ~91% rate, wow!

 

DPS Automatic Ban [ACE52CQB-72-150-136]

This is actually not from a damage mod, it's from an aimbot that ends up in the calculations looking like a damage mod due to the incredibly high HSK%. He has 150 kills, 136 HS, so yes 91% HSK. That means roughly 91% of his shots get the 200% damage bonus the game gives for headshots, so it looks like a damage mod when calculating it, and since DPS bans take priority it issues the dps ban insteadk of hsk ban.

 

Priority is DPS > HSK > KPM, in order of generally most conclusive.

 

The only way he would have gotten those values is by either stat padding with a friend (our own members have done this and triggered the script causing a ban), or using an aimbot.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Yep, I've had this set since day one in my email since I use Outlook with Gmail, it has to be on. I also have it on in email settings in AdKats

Hmm, it should be attempting to send at least...i'll look into it.

[ImportBot]

Originally Posted by JR8355*:

 

Hmm, it should be attempting to send at least...i'll look into it.

Thanks Col, anything on this yet?

[ImportBot]

Originally Posted by JR8355*:

 

Col, I was doing some further reading on the Auto-Report-Handler and wondered, how does this actually work? Could you give a few good examples on how it acts on certain words or phrases? So I gather this acts as sort of a chat trigger responder but in a auto-punishment sense?

 

Also, it mentions for the Hacker Checker it has a Whitelist? I don't see anywhere for this.

[ImportBot]

Originally Posted by Xjmhd*:

 

Hello, I'm having issues adding a new soldier to a user through the procon interface, when I add the soldier name nothing happens, I can add Email change user role etc with no issues. How would I go about adding the soldier name manually through the Mysql db? Thanks

[ImportBot]

Originally Posted by CryX*:

 

Hi,

 

Become only this on the ingame Chat box when use a ingame admin Command.

 

AdKats was recently started/rebooted. Please wait a minute for player listing to complete.

I get this message even after 30 - 60 minutes...

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Col, I was doing some further reading on the Auto-Report-Handler and wondered, how does this actually work? Could you give a few good examples on how it acts on certain words or phrases? So I gather this acts as sort of a chat trigger responder but in a auto-punishment sense?

 

Also, it mentions for the Hacker Checker it has a Whitelist? I don't see anywhere for this.

Word "smoke" is in the list of auto-handling trigger words/phrases. An admin assistant reports someone for "using smoke" or "throwing smoke" or any message containing the word smoke. Autoadmin acts on it with a punish if no restriction conditions are met, and depending on whether an admin is in the server, after a delay. You will see the messages to the player describing what will happen in procon chat window.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Hello, I'm having issues adding a new soldier to a user through the procon interface, when I add the soldier name nothing happens, I can add Email change user role etc with no issues. How would I go about adding the soldier name manually through the Mysql db? Thanks

Let me know if the 4.1.0.5 test update im releasing later today fixes this. Once updated, delete the user and add them again. Their soldier should automatically populate if you use their soldier name as their user name.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Hi,

 

Become only this on the ingame Chat box when use a ingame admin Command.

 

 

 

I get this message even after 30 - 60 minutes...

That is strange, it usually only takes a few seconds...up to a minute if your database is lagging...i'll look into it. For now try rebooting your layer as this seems like an edge case.

[ImportBot]

Originally Posted by CryX*:

 

That is strange, it usually only takes a few seconds...up to a minute if your database is lagging...i'll look into it. For now try rebooting your layer as this seems like an edge case.

Not helping before I updated worked Adkats fine...

[ImportBot]

Originally Posted by B3g1nz*:

 

hi

 

I had this error after adding new user

 

 

[21:32:10] [AdKats] EXCEPTION: Line 0: [GetDisplayPluginVariables][Error while fetching display vars.]: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.

at System.ThrowHelper.ThrowKeyNotFoundException()

at System.Collections.Generic.Dictionary`2.get_Item(T Key key)

at PRoConEvents.AdKats.c__DisplayClassf.b__8(AdKatsPlayer aPlayer)

at System.Linq.Enumerable.WhereSelectEnumerableIterat or`2.MoveNext()

at System.Collections.Generic.List`1.InsertRange(Int3 2 index, IEnumerable`1 collection)

at PRoConEvents.AdKats.GetDisplayPluginVariables()

[ImportBot]

Originally Posted by Jamesonp*:

 

We continue to see procon lagging. With the beta version I'm running I'm seeing it takes 230 seconds sometimes to update the info from the database.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

We continue to see procon lagging. With the beta version I'm running I'm seeing it takes 230 seconds sometimes to update the info from the database.

Wait what do you mean update the info from the database? What info?

[ImportBot]

Originally Posted by CryX*:

 

That is strange, it usually only takes a few seconds...up to a minute if your database is lagging...i'll look into it. For now try rebooting your layer as this seems like an edge case.

AdKats worked only on max 16 Player ... 16 Player + and he worked not

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

AdKats worked only on max 16 Player ... 16 Player + and he worked not

We have it running on twelve 64 man servers without issue, so i'm trying to find what is causing this on your particular server. Give me some time to look it over.

[ImportBot]

Originally Posted by Jamesonp*:

 

Was there a 4.1.0.5 version you were planning on releasing yesterday?

[ImportBot]

Originally Posted by mase*:

 

my host had some problems with their mysql database. they restored it with an old backup that broke the statslogger from xpkiller.

after a long suportticket marathon they finally managed to reset the plugin so it makes tables again.

 

the statslogger is running now and done the tables, however adkats says, that there arent any.

 

those are the tables i have right now, are they named badly maybe?

 

[AdKats] ERROR: Tables from XPKiller's Stat Logger not present in the database. Enable that plugin then re-run AdKats!

[AdKats] WARNING: Shutting down AdKats.

[AdKats] AdKats 4.1.0.0 Disabled! =(

 

the adkats tables are the ones from the backup

 

[ImportBot]

Originally Posted by Jamesonp*:

 

I'm guessing the trailing ? on the tables is screwing it up.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Was there a 4.1.0.5 version you were planning on releasing yesterday?

Yes, still adding updates to that version.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

my host had some problems with their mysql database. they restored it with an old backup that broke the statslogger from xpkiller.

after a long suportticket marathon they finally managed to reset the plugin so it makes tables again.

 

the statslogger is running now and done the tables, however adkats says, that there arent any.

 

those are the tables i have right now, are they named badly maybe?

 

[AdKats] ERROR: Tables from XPKiller's Stat Logger not present in the database. Enable that plugin then re-run AdKats!

[AdKats] WARNING: Shutting down AdKats.

[AdKats] AdKats 4.1.0.0 Disabled! =(

 

the adkats tables are the ones from the backup

 

There is a "new_" at the end of every table. That cannot be there for this to function correctly.

[ImportBot]

Originally Posted by mase*:

 

There is a "new_" at the end of every table. That cannot be there for this to function correctly.

weirdly the stats logger is making the tables like that. messaged my host and asked for a reset of the database, hopefully that helps...

[ImportBot]

Originally Posted by CaptCourage*:

 

I noticed some anomilies in the console log today regarding Adkats....Is this an issue....

 

[19:14:39] procon.plugin.onConsole -8588082044101741893 [AdKats] ERROR: Unable to find teamswap command when assigning conditional commands.

[19:14:39] OK

[19:14:39] procon.plugin.onConsole -8588082044101741893 [AdKats] ERROR: Unable to find teamswap command when assigning conditional commands.

[19:14:39] OK

 

 

 

 

[19:14:41] procon.plugin.onConsole -8588082044082991957 [AdKats] EXCEPTION: Line 0: [FetchUserList][Error while fetching access list.]: MySql.Data.MySqlClient.MySqlException: Table 'ccsteamt_procon.adkats_specialplayers' doesn't exist

at MySql.Data.MySqlClient.MySqlStream.ReadPacket()

at MySql.Data.MySqlClient.NativeDriver.GetResult(Int3 2& affectedRow, Int64& insertedId)

at MySql.Data.MySqlClient.Driver.GetResult(Int32 statementId, Int32& affectedRows, Int64& insertedId)

at MySql.Data.MySqlClient.Driver.NextResult(Int32 statementId, Boolean force)

at MySql.Data.MySqlClient.MySqlDataReader.NextResult( )

at MySql.Data.MySqlClient.MySqlCommand.ExecuteReader( CommandBehavior behavior)

at PRoConEvents.AdKats.FetchUserList()

[19:14:41] OK

 

 

From what I understand it is saying that a certain table that is required in my database does not exist....I was under the impression that the table data was updated on connection...But then again I is a noob at this...

 

Please advise....sorry if the info is in another thread , cannot find anything..

 

Thanks

 

CC

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

4.1.0.5

 

It will automatically update the database from 4.0.0.0+, no extra scripts are needed.

 

Changes here, minus some small bugs fixed: https://github.com/ColColonCleaner/A...6&state=closed

 

Test version until proven working on 1.4.2.0 of procon, which all layers should currently be updated to.

 

https://raw.github.com/ColColonClean...test/AdKats.cs

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Thinking about adding one last thing before the official release. A lock on adkats settings. Basically once activated via the settings tab it will lock all adkats settings and grey out the values. The only thing that can be used in settings when locked is command entry and mini-ban-management. Some people had issues with admins having access to all settings when all they needed was ban management and command entry. The only way to unlock settings will be to have direct database access and change the lock setting from there in the settings table.