Jump to content

Ultimate Map Manager (1.2.5.0 - 03/26/15)

Prophet731

By Prophet731
in Plugins

Recommended Posts

ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

What happens if:

 

Maplist 0 (min players 0 - max players 64 = this is when Maplist 1 is loaded at the end of the round (also there an option to run the map 3 times but not to change to Maplist 1 until round is over AND if 64 players are on server_))

Maplist 1 (min players 20 - max players "nothing here" = this means that if server goes under 20 players at any time it switches to Maplist 0, but what happens when server reaches 64 players? will it play Maplist 1 in loop unless server goes under 20? or does it go to Maplist 0 because that has a max players of 64_)

 

Thx and sorry for my questions :biggrin:

 

EDIT: Ohh and sent ya 5 quid under [email protected] :biggrin:

If you have Map List 0 set to min 0 max 64, then it will never switch to any other map list. There's currently no option to limit a Map List to a certain number or rounds. In your example, if it were able to get to Map List 1, it would switch back to Map List 0 when there were less than 20 players online.
* Restored post. It could be that the author is no longer active.
Link to comment
  • Replies 2.5k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Prophet731
Prophet731

Description This plug-in is intended to manage your map rotation based upon the number of players on the server. Optionally, it will also change the server name to match the current rotation, allow ce

Posted Images

ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

@ Falcon

 

It appears this plugin is what I need but I'd like to make sure first. I have set my maplist to rush maps with Noshahr Canals TDM mixed between each rush map, starting with a rush. ex)

1) bazzarr rush

2)NC tdm

3)damavand rush

4)NC tdm ( and so on)

 

However, without any plugin use after map 3 it will go back to map 2 instead of 4, turning the maplist into 2 map cycle only, 2, 3, 2, 3. I assume this is because they only allow 1 map of a mode in the maplist.

My question is with your plugin can I have multple rounds of the same map and mode in 1 maplist, ( not back to back, just in the cycle)? Thank you

That's a server bug that's actually mentioned in the first post. Using this plugin will not help you to run multiple rounds of the same map and mode in the same map list.
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

New version is being sent out. This just fixes a couple minor bugs.

 

1.1.2.2 (02/11/2012)

- fixed map list names bug when '|' is attempted to be used

- custom map names now shown in debug logs when map lists change

- fixed time calculations weren't working properly on some systems

* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by MadDoggyDawg*:

 

If you have Map List 0 set to min 0 max 64, then it will never switch to any other map list. There's currently no option to limit a Map List to a certain number or rounds. In your example, if it were able to get to Map List 1, it would switch back to Map List 0 when there were less than 20 players online.

So if I put Map List 0 min 0 and max 60 when it reaches 60 it will change the next round to ML1? And next round Map List 1 will run that has to be min 20 (to change to Map List 0) and max 64 and it will never change? Thanks
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

So if I put Map List 0 min 0 and max 60 when it reaches 60 it will change the next round to ML1? And next round Map List 1 will run that has to be min 20 (to change to Map List 0) and max 64 and it will never change? Thanks

In that example, it would change the ML1 with over 60 players and it would change back to ML0 with less than 20 players.
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

Thats brilliant mate.. just the way I need it to work. Why won't it work though if its set to 64?

If one map list is set to min 0 and max 64, it will never change because the max is never exceeded. There have to be MORE players than the max in order for it to switch.
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by MadDoggyDawg*:

 

If one map list is set to min 0 and max 64, it will never change because the max is never exceeded. There have to be MORE players than the max in order for it to switch.

That totally makes sense :biggrin:

 

One more thing while you are still here. The presets... I create them and then add them to the map list? Also if I just take everything out from the standard preset that are there and just put the only variables I need... it will only change that preset and keep the rest the server has?

* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

That totally makes sense :biggrin:

 

One more thing while you are still here. The presets... I create them and then add them to the map list? Also if I just take everything out from the standard preset that are there and just put the only variables I need... it will only change that preset and keep the rest the server has?

Yes. It will only change the variables that you list, so you can put only the ones you want to use in the custom presets.
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by MadDoggyDawg*:

 

Thanks mate you are a rock star :biggrin:

 

edit: one more last thing... the three standard preset... are those the ones that dice gave us or it loads them from server? :biggrin: also for the vars for this one for example to I need to use "" or anything? or this is ok [vars.maxPlayers 64]

* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

Thanks mate you are a rock star :biggrin:

 

edit: one more last thing... the three standard preset... are those the ones that dice gave us or it loads them from server? :biggrin:

Those are from the admin documentation. It doesn't load them from the server.
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by Legate*:

 

Tobsen03, try without capital letters.

 

Solve this little issue with the days is not easy: I tried using english (fail), spanish with capital letters (fail).

 

The days must be exactly as you see on your SO (check that you don't have any empty space at the end of the name)

* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by MadDoggyDawg*:

 

Hi mate this plugin works wonders... However about time specific maps...

 

I want Map List 0 to be available 24/7, which is possible start time 00:00 and end time 23:59. Now I have Map List 1 which I want it to start at 09:00 however I do not want an end time, so if next day at 3 AM let's say it changes to Map List 0 because it has under 20 players so the end time of the Map List 1 will depend on the player count, I do not want Map List 1 available until 9:00. So what should I put for end time? Can I leave it blank?

* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

Hi mate this plugin works wonders... However about time specific maps...

 

I want Map List 0 to be available 24/7, which is possible start time 00:00 and end time 23:59. Now I have Map List 1 which I want it to start at 09:00 however I do not want an end time, so if next day at 3 AM let's say it changes to Map List 0 because it has under 20 players, I do not want Map List 1 available until 9:00. So what should I put for end time? Can I leave it blank?

Unfortunately, that's currently not possible. The start and end times are both required and the map list will only be available between those times.
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by hennessy*:

 

Hi there, first of all, awesome plugin, we did some testing and it worked almost as expected which is really great already, we just had a small issue when manually switching to another map. Is there a way to keep the preset from UMM? We chose to skip one map yesterday and the map we switched to had a inf only preset in UMM, somehow it wasn't inf only in the first round but in the second round it worked.

* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by falcontx*:

 

Hi there, first of all, awesome plugin, we did some testing and it worked almost as expected which is really great already, we just had a small issue when manually switching to another map. Is there a way to keep the preset from UMM? We chose to skip one map yesterday and the map we switched to had a inf only preset in UMM, somehow it wasn't inf only in the first round but in the second round it worked.

It does send the commands from the preset to the server. You can verify this in the log. However, sometimes the server doesn't respond properly. I don't know why not.
* Restored post. It could be that the author is no longer active.
Link to comment
ImportBot Advanced Member

ImportBot

Posted
Posted

Originally Posted by Ryote*:

 

Hi mate running your plugin on our server for a while now and finally got everything working great! Would it be possible in a future version that we could set the amount of tickets for each map?

 

Thanks

 

Ry

* Restored post. It could be that the author is no longer active.
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing


  • Our picks

    • EZRCON Update (9/4/2021)

      Prophet731 posted a topic in News,

      Game Server Hosting:

      We're happy to announce that EZRCON will branch out into the game server provider scene. This is a big step for us so please having patience if something doesn't go right in this area. Now, what makes us different compared to other providers? Well, we're going with the idea of having a scaleable server hosting and providing more control in how you set up your server. For example, in Minecraft, you have the ability to control how many CPU cores you wish your server to have access to, how much RAM you want to use, how much disk space you want to use. This type of control can't be offered in a single service package so you're able to configure a custom package the way you want it.

      You can see all the available games here. Currently, we have the following games available.

      Valheim (From $1.50 USD)


      Rust (From $3.20 USD)


      Minecraft (Basic) (From $4.00 USD)


      Call of Duty 4X (From $7.00 USD)


      OpenTTD (From $4.00 USD)


      Squad (From $9.00 USD)


      Insurgency: Sandstorm (From $6.40 USD)


      Changes to US-East:

      Starting in January 2022, we will be moving to a different provider that has better support, better infrastructure, and better connectivity. We've noticed that the connection/routes to this location are not ideal and it's been hard getting support to correct this. Our contract for our two servers ends in March/April respectively. If you currently have servers in this location you will be migrated over to the new provider. We'll have more details when the time comes closer to January. The new location for this change will be based out of Atlanta, GA. If you have any questions/concerns please open a ticket and we'll do our best to answer them.
      • 5 replies
      Prophet731

      Picked By

      Prophet731,

    • EZRCON Update 5/13/2021

      Prophet731 posted a topic in News,

      Hello All,

      I wanted to give an update to how EZRCON is doing. As of today we have 56 active customers using the services offered. I'm glad its doing so well and it hasn't been 1 year yet. To those that have services with EZRCON, I hope the service is doing well and if not please let us know so that we can improve it where possible. We've done quite a few changes behind the scenes to improve the performance hopefully. 

      We'll be launching a new location for hosting procon layers in either Los Angeles, USA or Chicago, IL. Still being decided on where the placement should be but these two locations are not set in stone yet. We would like to get feedback on where we should have a new location for hosting the Procon Layers, which you can do by replying to this topic. A poll will be created where people can vote on which location they would like to see.

      We're also looking for some suggestions on what else you would like to see for hosting provider options. So please let us know your thoughts on this matter.
      • 4 replies
      Prophet731

      Picked By

      Prophet731,

    • Procon Version 1.5.3.5 Released

      Prophet731 posted a topic in News,

      Added ability to disable the new API check for player country info


      Updated GeoIP database file


      Removed usage sending stats


      Added EZRCON ad banner



      If you are upgrading then you may need to add these two lines to your existing installation in the file procon.cfg. To enable these options just change False to True.

      procon.private.options.UseGeoIpFileOnly False
      procon.private.options.BlockRssFeedNews False



       
      • 2 replies
      Prophet731

      Picked By

      Prophet731,

    • Procon, Database & BFACP Hosting

      Prophet731 posted a topic in News,

      I wanted I let you know that I am starting to build out the foundation for the hosting services that I talked about here. The pricing model I was originally going for wasn't going to be suitable for how I want to build it. So instead I decided to offer each service as it's own product instead of a package deal. In the future, hopefully, I will be able to do this and offer discounts to those that choose it.

      Here is how the pricing is laid out for each service as well as information about each. This is as of 7/12/2020.

      Single MySQL database (up to 30 GB) is $10 USD per month.



      If you go over the 30 GB usage for the database then each additional gigabyte is charged at $0.10 USD each billing cycle. If you're under 30GB you don't need to worry about this.


      Databases are replicated across 3 zones (regions) for redundancy. One (1) on the east coast of the USA, One (1) in Frankfurt, and One (1) in Singapore. Depending on the demand, this would grow to more regions.


      Databases will also be backed up daily and retained for 7 days.




      Procon Layer will be $2 USD per month.


      Each layer will only allow one (1) game server connection. The reason behind this is for performance.


      Each layer will also come with all available plugins installed by default. This is to help facilitate faster deployments and get you up and running quickly.


      Each layer will automatically restart if Procon crashes. 


      Each layer will also automatically restart daily at midnight to make sure it stays in tip-top shape.


      Custom plugins can be installed by submitting a support ticket.




      Battlefield Admin Control Panel (BFACP) will be $5 USD per month


      As I am still working on building version 3 of the software, I will be installing the last version I did. Once I complete version 3 it will automatically be upgraded for you.





      All these services will be managed by me so you don't have to worry about the technical side of things to get up and going.

      If you would like to see how much it would cost for the services, I made a calculator that you can use. It can be found here https://ezrcon.com/calculator.html

       
      • 11 replies
      Prophet731

      Picked By

      Prophet731,

    • Procon Version 1.5.3.4 Released

      Prophet731 posted a topic in News,

      I have pushed out a new minor release which updates the geodata pull (flags in the playerlisting). This should be way more accurate now. As always, please let me know if any problems show up.

       
      • 9 replies
      Prophet731

      Picked By

      Prophet731,
    View All
×
×
  • Create New...

Important Information

Please review our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.