ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: What happens if: Maplist 0 (min players 0 - max players 64 = this is when Maplist 1 is loaded at the end of the round (also there an option to run the map 3 times but not to change to Maplist 1 until round is over AND if 64 players are on server_)) Maplist 1 (min players 20 - max players "nothing here" = this means that if server goes under 20 players at any time it switches to Maplist 0, but what happens when server reaches 64 players? will it play Maplist 1 in loop unless server goes under 20? or does it go to Maplist 0 because that has a max players of 64_) Thx and sorry for my questions EDIT: Ohh and sent ya 5 quid under [email protected] If you have Map List 0 set to min 0 max 64, then it will never switch to any other map list. There's currently no option to limit a Map List to a certain number or rounds. In your example, if it were able to get to Map List 1, it would switch back to Map List 0 when there were less than 20 players online. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: @ Falcon It appears this plugin is what I need but I'd like to make sure first. I have set my maplist to rush maps with Noshahr Canals TDM mixed between each rush map, starting with a rush. ex) 1) bazzarr rush 2)NC tdm 3)damavand rush 4)NC tdm ( and so on) However, without any plugin use after map 3 it will go back to map 2 instead of 4, turning the maplist into 2 map cycle only, 2, 3, 2, 3. I assume this is because they only allow 1 map of a mode in the maplist. My question is with your plugin can I have multple rounds of the same map and mode in 1 maplist, ( not back to back, just in the cycle)? Thank you That's a server bug that's actually mentioned in the first post. Using this plugin will not help you to run multiple rounds of the same map and mode in the same map list. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by *UWS*SAMPSON*: Oh my silly me, So many posts, and while trying to find an answer I seemed to miss that, thank you, and sorry to waste your time Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: I think since last update the patch for saving the timleline is not included.Timeline? I'm not sure if you mean Time Zone, or not, but that bug was fixed in version 1.1.2.0. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: New version is being sent out. This just fixes a couple minor bugs. 1.1.2.2 (02/11/2012) - fixed map list names bug when '|' is attempted to be used - custom map names now shown in debug logs when map lists change - fixed time calculations weren't working properly on some systems Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by MadDoggyDawg*: If you have Map List 0 set to min 0 max 64, then it will never switch to any other map list. There's currently no option to limit a Map List to a certain number or rounds. In your example, if it were able to get to Map List 1, it would switch back to Map List 0 when there were less than 20 players online.So if I put Map List 0 min 0 and max 60 when it reaches 60 it will change the next round to ML1? And next round Map List 1 will run that has to be min 20 (to change to Map List 0) and max 64 and it will never change? Thanks Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: So if I put Map List 0 min 0 and max 60 when it reaches 60 it will change the next round to ML1? And next round Map List 1 will run that has to be min 20 (to change to Map List 0) and max 64 and it will never change? ThanksIn that example, it would change the ML1 with over 60 players and it would change back to ML0 with less than 20 players. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by MadDoggyDawg*: Thats brilliant mate.. just the way I need it to work. Why won't it work though if its set to 64? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: Thats brilliant mate.. just the way I need it to work. Why won't it work though if its set to 64?If one map list is set to min 0 and max 64, it will never change because the max is never exceeded. There have to be MORE players than the max in order for it to switch. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by MadDoggyDawg*: If one map list is set to min 0 and max 64, it will never change because the max is never exceeded. There have to be MORE players than the max in order for it to switch.That totally makes sense One more thing while you are still here. The presets... I create them and then add them to the map list? Also if I just take everything out from the standard preset that are there and just put the only variables I need... it will only change that preset and keep the rest the server has? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: That totally makes sense One more thing while you are still here. The presets... I create them and then add them to the map list? Also if I just take everything out from the standard preset that are there and just put the only variables I need... it will only change that preset and keep the rest the server has? Yes. It will only change the variables that you list, so you can put only the ones you want to use in the custom presets. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by MadDoggyDawg*: Thanks mate you are a rock star edit: one more last thing... the three standard preset... are those the ones that dice gave us or it loads them from server? also for the vars for this one for example to I need to use "" or anything? or this is ok [vars.maxPlayers 64] Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 11, 2012 Share Posted February 11, 2012 Originally Posted by falcontx*: Thanks mate you are a rock star edit: one more last thing... the three standard preset... are those the ones that dice gave us or it loads them from server? Those are from the admin documentation. It doesn't load them from the server. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 12, 2012 Share Posted February 12, 2012 Originally Posted by terwax*: Not too sure but if you use gmail, you can have the files auto emailed - right now i'm waiting for mine. GIMME TEH FILEZ! Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 12, 2012 Share Posted February 12, 2012 Originally Posted by Tobsen03*: I have a problem... I want to have a Map list for my INF ONLY Day ... I klick only Saturday but today didn´t switch to the normal list....... procon.png Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 12, 2012 Share Posted February 12, 2012 Originally Posted by Legate*: Tobsen03, try without capital letters. Solve this little issue with the days is not easy: I tried using english (fail), spanish with capital letters (fail). The days must be exactly as you see on your SO (check that you don't have any empty space at the end of the name) Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 12, 2012 Share Posted February 12, 2012 Originally Posted by hennessy*: Just donated to get access to this awesome tool. Thanks in advance! Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 13, 2012 Share Posted February 13, 2012 Originally Posted by Fluggi242*: I Donated to and you got an PM Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 13, 2012 Share Posted February 13, 2012 Originally Posted by falcontx*: I have a problem... I want to have a Map list for my INF ONLY Day ... I klick only Saturday but today didn´t switch to the normal list....... procon.png Your Time Zone selection appears to be wrong. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 13, 2012 Share Posted February 13, 2012 Originally Posted by MadDoggyDawg*: Hi mate this plugin works wonders... However about time specific maps... I want Map List 0 to be available 24/7, which is possible start time 00:00 and end time 23:59. Now I have Map List 1 which I want it to start at 09:00 however I do not want an end time, so if next day at 3 AM let's say it changes to Map List 0 because it has under 20 players so the end time of the Map List 1 will depend on the player count, I do not want Map List 1 available until 9:00. So what should I put for end time? Can I leave it blank? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 13, 2012 Share Posted February 13, 2012 Originally Posted by falcontx*: Hi mate this plugin works wonders... However about time specific maps... I want Map List 0 to be available 24/7, which is possible start time 00:00 and end time 23:59. Now I have Map List 1 which I want it to start at 09:00 however I do not want an end time, so if next day at 3 AM let's say it changes to Map List 0 because it has under 20 players, I do not want Map List 1 available until 9:00. So what should I put for end time? Can I leave it blank? Unfortunately, that's currently not possible. The start and end times are both required and the map list will only be available between those times. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by hennessy*: Hi there, first of all, awesome plugin, we did some testing and it worked almost as expected which is really great already, we just had a small issue when manually switching to another map. Is there a way to keep the preset from UMM? We chose to skip one map yesterday and the map we switched to had a inf only preset in UMM, somehow it wasn't inf only in the first round but in the second round it worked. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by Tobsen03*: Which one must i use for Germany...? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by falcontx*: Hi there, first of all, awesome plugin, we did some testing and it worked almost as expected which is really great already, we just had a small issue when manually switching to another map. Is there a way to keep the preset from UMM? We chose to skip one map yesterday and the map we switched to had a inf only preset in UMM, somehow it wasn't inf only in the first round but in the second round it worked.It does send the commands from the preset to the server. You can verify this in the log. However, sometimes the server doesn't respond properly. I don't know why not. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by falcontx*: Which one must i use for Germany...?I don't know. I live in the US. Maybe GMT+1? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by kaytan*: Maybe GMT+1?jep, thats the right one for GER. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by Tobsen03*: i can´t fin it on the tool .... (UTC+01:00) West-Zentralafrika ? (UTC+01:00) Windhuk? There isn´t GMT + 1 Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by falcontx*: i can´t fin it on the tool .... (UTC+01:00) West-Zentralafrika ? (UTC+01:00) Windhuk? There isn´t GMT + 1 UTC is the same thing. Just pick the first one. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by Tobsen03*: I try (UTC+01:00) West-Zentralafrika........ Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted February 14, 2012 Share Posted February 14, 2012 Originally Posted by Ryote*: Hi mate running your plugin on our server for a while now and finally got everything working great! Would it be possible in a future version that we could set the amount of tickets for each map? Thanks Ry Quote * Restored post. It could be that the author is no longer active. Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.