Adaptive Ticket Count (1.2.1.1 - 12/08/13)

[ImportBot]

Originally Posted by falcontx*:

 

I think I've enabled the logging and events correctly. Where will I be able to find the logfile?

There should be a logs folder when you log into the FTP for your layer server.

[ImportBot]

Originally Posted by BobbyDigital*:

 

the plugin turns off and on after each round i have to keep restarting the round so the correct tickets can be set by the plugin

[ImportBot]

Originally Posted by falcontx*:

 

the plugin turns off and on after each round i have to keep restarting the round so the correct tickets can be set by the plugin

If you turn on debug messages in the plugin settings, the plugin will tell you how the tickets are calculated in the plugin console. Also, the ticket count will not change during the middle of a round.

[ImportBot]

Originally Posted by Sabn0ck*:

 

I tried deleting and reinstalling, still acting like its not enabled. I will now try to get the logs.

[ImportBot]

Originally Posted by purebattlefield*:

 

Is there a possibility to alter the ticket counts for a specific map? We run a rotation of all maps but would like games on, for example, Damavand Peak to be shorter than the other maps since some players seem to think this map is a bottleneck at 64 players. If not a possibility within this plugin, can it be done via alternate means that anyone knows about? Thank you.

[ImportBot]

Originally Posted by falcontx*:

 

Is there a possibility to alter the ticket counts for a specific map? We run a rotation of all maps but would like games on, for example, Damavand Peak to be shorter than the other maps since some players seem to think this map is a bottleneck at 64 players. If not a possibility within this plugin, can it be done via alternate means that anyone knows about? Thank you.

It can't be done with this plugin, but Ultimate Map Manager allows a custom set of variables to be run for each map using custom presets.

[ImportBot]

Originally Posted by Sabn0ck*:

 

I tried deleting and reinstalling, still acting like its not enabled. I will now try to get the logs.

I had problems getting the logs and/or getting them enabled correctly. This is a great plugin and without my servers were suffering. Given, it not working was probably something I did, lol. I reinstalled(full wiped) Procon Layer and reinstalled all plugins, including this one and everything is working perfectly again. Thanks for the help and the great plugin!

[ImportBot]

Originally Posted by YouPilA*:

 

Hello

I am testing this plugin but it seems doesn't work.

My tickets count still the same whatever i set in the setting.

I tested with conquest small to have only 90 tickets but it still 250 tockets (100%)

i tested by finishing a map and load a conquest map alone on my server.

Can you help me please?

 

vinnfvvp.jpg

[ImportBot]

Originally Posted by falcontx*:

 

Hello

I am testing this plugin but it seems doesn't work.

My tickets count still the same whatever i set in the setting.

I tested with conquest small to have only 90 tickets but it still 250 tockets (100%)

i tested by finishing a map and load a conquest map alone on my server.

Can you help me please?

 

vinnfvvp.jpg

Not enough info here. Your screenshot has no debug messages from this plugin, I can't see what map you're on, how many players are on, and you haven't provided any logs. Please see the Support section of the original post.

[ImportBot]

Originally Posted by YouPilA*:

 

Ok sorry

can you tell me what log would you want, i have console's, events's and plugin's one.

[ImportBot]

Originally Posted by falcontx*:

 

Ok sorry

can you tell me what log would you want, i have console's, events's and plugin's one.

This is detailed in the first post. I need the plugin console log with debug enabled in the plugin, and I need the PRoCon console with events enabled (NOT the events log). These logs must come from your layer server, not your local computer.

[ImportBot]

Originally Posted by YouPilA*:

 

ok nop here it is i hope it's what you need

http://pastebin.com/A80HEVBw

http://pastebin.com/SKNptnfm

http://codepaste.net/vpdrdv

I use the last plugin version and the last procon version

Plugin's debug mod is Active.

Thank you for your job

[ImportBot]

Originally Posted by falcontx*:

 

ok nop here it is i hope it's what you need

http://pastebin.com/A80HEVBw

http://pastebin.com/SKNptnfm

http://codepaste.net/vpdrdv

I use the last plugin version and the last procon version

Plugin's debug mod is Active.

Thank you for your job

Thanks. This is good, but your console log (at codepaste.net) still doesn't have events enabled. The last 2-3 pages of this thread explain how to enabled events in the console log. Also, while reading the last 2-3 pages, you may see that some other people have had the same problem that you are having and they were able to solve it by reloading their layer server and all plugins.

[ImportBot]

Originally Posted by Flaxe*:

 

As falcontx says, some other people (including me) have had the same problem as you and the only fix I've found (and what other people found I think) is to do a full re-install of the Layer and configure it all up from scratch again. It may be a bit painful.. but seems to be the only fix for Adaptive Ticket Count plugin atm

[ImportBot]

Originally Posted by YouPilA*:

 

erfff many setting to reload!!!!

[ImportBot]

Originally Posted by Flaxe*:

 

erfff many setting to reload!!!!

Well, if you know how to do, you could backup your server_ip.cfg and after re-installed all the plugins, you just copy/paste all the old settings from server_ip.cfg to the new one (except copy/pasting the Adaptive Ticket Size settings). That will make all your plugins have the same settings as before and you just have to do all the Adaptive Ticket Size settings from scratch.

[ImportBot]

Originally Posted by YouPilA*:

 

Well i deleted all layer files, i re-installed it and reloaded plugin files.

I just activated Adaptive tickets one.

I run it with a few personal settings and activated debug mod.

No result it does not work.

i am affraid i deleted all for nothing.

 

http://codepaste.net/mism19

http://codepaste.net/cp3noi

http://codepaste.net/vbhwsg

[ImportBot]

Originally Posted by Flaxe*:

 

Well i deleted all layer files, i re-installed it and reloaded plugin files.

I just activated Adaptive tickets one.

I run it with a few personal settings and activated debug mod.

No result it does not work.

i am affraid i deleted all for nothing.

 

http://codepaste.net/mism19

http://codepaste.net/cp3noi

http://codepaste.net/vbhwsg

Did you really do a full re-install of the Layer, and not just removed the plugin files?

[ImportBot]

Originally Posted by YouPilA*:

 

As i said, i deleted all the files on ftp and re-installed procon server then i reloaded the latests versions of all plugins i use.

[ImportBot]

Originally Posted by falcontx*:

 

To this day, no one has provided the proper logs to allow me to debug this problem, despite the extensive discussion on how to enable the logs and do proper event logging in the console logs. If you want to give me full access to your layer server, including the ability to FTP, then I'll log in and figure it out.

[ImportBot]

Originally Posted by YouPilA*:

 

I ll give you them tomorow

[ImportBot]

Originally Posted by WarGasimXD*:

 

I got the plugin, but for somereason my server is stuck on 129 kills now any help? the server is full and at around 25 players it shoud be 300 kills (TDM) but has been stuck on 129 through all maps here is a pic

 

[ImportBot]

Originally Posted by falcontx*:

 

I got the plugin, but for somereason my server is stuck on 129 kills now any help? the server is full and at around 25 players it shoud be 300 kills (TDM) but has been stuck on 129 through all maps here is a pic

No idea. This isn't nearly enough information to diagnose your problem. Please refer to the Support section of the original post.

[ImportBot]

Originally Posted by LittleLama*:

 

Hi,

 

Adaptive Ticket Count was working fine on our server, but since the last days, it doesn't answer at all.

I tried to change tickets but it didn't work, reinstall it .. no way. Tickets are blocked on the gamemode var.

ATC doesn't seem to load.

Could you check this ?

 

1) Your plugin console log starting 2 minutes before and ending 2 minutes after the issue occured.

Here are the logs, I did a reboot, change many maps : https://www.dropbox.com/sh/jrud8yw45xm2lt2/LO029kUs5l

 

2) Your PRoCon console log WITH EVENTS ENABLED starting 2 minutes before and ending 2 minutes after the issue occured.

Same link: https://www.dropbox.com/sh/jrud8yw45xm2lt2/LO029kUs5l

 

3) A complete list of your plugin settings (screenshot or relevant lines from your config file would be ideal)

Adaptive ticket count 1.1.1.3 : enabled

BasicInGameInfo 3.0.0.0 : disabled

InGameAdmin 3.3.0.2 : enabled

CSpambot 2.0.0.1 : disabled

 

4) What version of the plugin you are running.

Adaptive ticket count 1.1.1.3

 

5) What version of PRoCon you are running.

Procon 1.3.0.0

 

Bonus 6) My ATC config

https://www.dropbox.com/sh/jrud8yw45xm2lt2/LO029kUs5l

 

Thank you very much

[ImportBot]

Originally Posted by falcontx*:

 

1) I need the logs from your layer server, not your local client.

2) Again, I need the logs from your layer server, not your local client. Also, I need events enabled in the PRoCon console logs. This is not the same as the separate Events log.

[ImportBot]

Originally Posted by thetoast*:

 

will this plugin be updated for the AK game modes?

[ImportBot]

Originally Posted by falcontx*:

 

Yes

[ImportBot]

Originally Posted by falcontx*:

 

Updated.

 

1.1.2.0 (09/09/2012)

- added support for Tank Superiority

[ImportBot]

Originally Posted by Ruger*:

 

Yes....thanks falcon.

 

 

Sent from my iPhone using Tapatalk

[ImportBot]

Originally Posted by Singh400*:

 

Updated.

 

1.1.2.0 (09/09/2012)

- added support for Tank Superiority

Doesn't this read the modes from BF3.def like your other plugins?