ImportBot Posted June 14, 2015 Author Share Posted June 14, 2015 Originally Posted by PapaCharlie9*: NEED HELP PLEASE! i uploaded the insane limits to my server. The necessary maps all have 777 rights. But when i try to make a new limit for gunmaster it says: (watch image) procon.png In the BF4 plugins folder the InsaneLimits.conf file exists. Procon is NOT running in sandbox mode: (Watch image bellow) procon04.png When I activate the Insane Limits in Procon i have to accept the privacy policy, after done that i get the following message:sad:watch image below) procon05.png Everything has read and write rights, but still getting these messages. Hope you guys can help me with this! Are you running on Linux? That is a common problem with Linux using Mono. Mono does not translate .Net file paths correctly. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 14, 2015 Author Share Posted June 14, 2015 Originally Posted by TheUltimateForce*: Are you running on Linux? That is a common problem with Linux using Mono. Mono does not translate .Net file paths correctly.No i am running windows 8.1, our server is from gamed.de Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 17, 2015 Author Share Posted June 17, 2015 Originally Posted by TheUltimateForce*: You have any other suggestion? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 17, 2015 Author Share Posted June 17, 2015 Originally Posted by LCARSx64*: No i am running windows 8.1, our server is from gamed.de You have any other suggestion?The permissions you show are for Linux. Windows does permissions differently. Firstly, make sure that the BF4 folder inside Plugins isn't Read-Only, then allow the following permissions for the user that Procon runs under on your server (right-click the BF4 folder, select Properties then the Security tab): Code: Modify List folder contents Read WriteIf you still have trouble, try also allowing the Read & execute permission. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 19, 2015 Author Share Posted June 19, 2015 Originally Posted by TheUltimateForce*: The permissions you show are for Linux. Windows does permissions differently. Firstly, make sure that the BF4 folder inside Plugins isn't Read-Only, then allow the following permissions for the user that Procon runs under on your server (right-click the BF4 folder, select Properties then the Security tab): Code: Modify List folder contents Read WriteIf you still have trouble, try also allowing the Read & execute permission. procon06.pngprocon07.png Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 19, 2015 Author Share Posted June 19, 2015 Originally Posted by LCARSx64*: procon06.pngprocon07.pngThose numeric permission values have no meaning for Windows, you need to use Windows permissions. Right-click the BF4 folder and select Properties. The Read-Only setting is in the General tab and the folder permissions are in the Security tab. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 19, 2015 Author Share Posted June 19, 2015 Originally Posted by TheUltimateForce*: Those numeric permission values have no meaning for Windows, you need to use Windows permissions. Right-click the BF4 folder and select Properties. The Read-Only setting is in the General tab and the folder permissions are in the Security tab.I did that too and its still not working.Look at the images bellow. procon08.pngprocon09.pngprocon10.pngprocon11.pngprocon12.png Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 21, 2015 Author Share Posted June 21, 2015 Originally Posted by TheUltimateForce*: What can i do more to make it work_? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 21, 2015 Author Share Posted June 21, 2015 Originally Posted by LCARSx64*: What can i do more to make it work_?I'm a little confused. You are running Procon client on Windows 8 but is that connecting directly to a game server or to a Procon layer? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 29, 2015 Author Share Posted June 29, 2015 Originally Posted by TheUltimateForce*: I'm a little confused. You are running Procon client on Windows 8 but is that connecting directly to a game server or to a Procon layer?Yes i am running Procon client on windows 8.1 and its connected to a procon layer from gamed.de! Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 29, 2015 Author Share Posted June 29, 2015 Originally Posted by LCARSx64*: Yes i am running Procon client on windows 8.1 and its connected to a procon layer from gamed.de!Ok, then it may be a permissions issue on your layer and for that you would need to contact your layer host (gamed.de). Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted June 30, 2015 Author Share Posted June 30, 2015 Originally Posted by Mamba334*: Can someone please answer this for me? After I enter the data provided by you on certain plugins, some of them say Enabled/Compiled, but some don't say anything. It's weird, because the ones that don't show 'Enabled/Complied' still work correctly. But it slows me down at times when it doesn't say that because I think I got them wrong. So I guess my question is: Is it ok for them to not read Enabled/Complied, or are they all supposed to say "Enabled/Complied"? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted July 8, 2015 Author Share Posted July 8, 2015 Originally Posted by Tales*: Hi all, can someone tell me if is it possible to create this limit for BF4? Limit 20 vehicle kills by a player on the same vehicle. Example player gets 10 MAA kills gets a warning saying "you have 10 kills with the LAV of a limit of 20" Player get 20 kills with the LAV gets a warning "You reached the limit of 20 kills on the LAV go do something else or get autokilled" and from now on every kill that he does with a LAV he gets auto killed. This will happen on all vehicles , to stop someone of using the same vehicle during the all round. You could get 20 kills with the lav , 20 kills with a tank etc.... Thanks in advance for any help Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted July 9, 2015 Author Share Posted July 9, 2015 Originally Posted by PapaCharlie9*: Can someone please answer this for me? After I enter the data provided by you on certain plugins, some of them say Enabled/Compiled, but some don't say anything. It's weird, because the ones that don't show 'Enabled/Complied' still work correctly. But it slows me down at times when it doesn't say that because I think I got them wrong. So I guess my question is: Is it ok for them to not read Enabled/Complied, or are they all supposed to say "Enabled/Complied"? Screenshot? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted July 9, 2015 Author Share Posted July 9, 2015 Originally Posted by PapaCharlie9*: Hi all, can someone tell me if is it possible to create this limit for BF4? Limit 20 vehicle kills by a player on the same vehicle. Example player gets 10 MAA kills gets a warning saying "you have 10 kills with the LAV of a limit of 20" Player get 20 kills with the LAV gets a warning "You reached the limit of 20 kills on the LAV go do something else or get autokilled" and from now on every kill that he does with a LAV he gets auto killed. This will happen on all vehicles , to stop someone of using the same vehicle during the all round. You could get 20 kills with the lav , 20 kills with a tank etc.... Thanks in advance for any help Try asking in the Insane Limits Requests thread. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted August 27, 2015 Author Share Posted August 27, 2015 Originally Posted by Frogtooth*: Did Windows 10 break SoundNotify? ... Edit: Never mind. Still not sure how I fixed it, but I did. Procon and Insane are fine, it was something funky about my box. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted September 1, 2015 Author Share Posted September 1, 2015 Originally Posted by moacco07*: Hi, Is insane limits having issues with the new patch on BF4? It can't load the all the limits that i have install. Btw i've replaced the version from 0.9.16.0 to 0.9.17.0, does this causes to lose all my limits (scripts)? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted September 2, 2015 Author Share Posted September 2, 2015 Originally Posted by LCARSx64*: Hi, Is insane limits having issues with the new patch on BF4? It can't load the all the limits that i have install. Btw i've replaced the version from 0.9.16.0 to 0.9.17.0, does this causes to lose all my limits (scripts)? This is probably the known issue, see the following: myrcon.net/...insane-limits-bfhl#entry31005 Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted September 3, 2015 Author Share Posted September 3, 2015 Originally Posted by UnstoppableStorm*: Hello, After the recent update. The limits and lists are completely gone, And also i am not able to create any limits, Is there anyother way to bring back the limits which i created before, Kindly help. Confused..! PS: I have already tried the following things on this link, Nothing helps. myrcon.net/...insane-limits-bfhl#entry31005 Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted September 15, 2015 Author Share Posted September 15, 2015 Originally Posted by IceCold*: can anyone help with twitter ? i have set it up, all seems to be correct with the settings. but nothing is being tweeted :/ ? do i need to setup a limit ? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted September 21, 2015 Author Share Posted September 21, 2015 Originally Posted by LCARSx64*: Papa, for BF4 server.GunMasterWeaponsPreset does not return the correct value. Is this an IL issue or does Procon need an update? The current BF4 GM Presets are: Code: 0 - Standard 1 - Classic 2 - Pistols 3 - DLC 4 - Troll 5 - Night Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted September 29, 2015 Author Share Posted September 29, 2015 Originally Posted by NDBoost*: Hey there I am new to insane limits and trying to setup a KD/r kick of > 2.5 or more.. can someone look at my configs and tell me what im doing wrong? http://i.imgur.com/JCVo3j9.png Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 3, 2015 Author Share Posted October 3, 2015 Originally Posted by Blackis*: Hello, After the recent update. The limits and lists are completely gone, And also i am not able to create any limits, Is there anyother way to bring back the limits which i created before, Kindly help. Confused..! PS: I have already tried the following things on this link, Nothing helps. myrcon.net/...insane-limits-bfhl#entry31005 Do you have a Layer server at Fragnet? I have the exact same problem with my layer connected to a game-server located in Frankfurt.When I select "new_limit" and select "true", nothing happens and when i restart the Layer I have to accept the Privacy Policy each time. Much like the layer server not remembering the settings in InsaneLimit. Other plugins I use work as they should. Then i have a Layer serve at Fragnet located in Sweden and this one works perfekt. The thing with the Swedish layer is that i´m not allowed to install the plugins my self. So i will start a Ticket at Fragnet and ask them to install Insanelimts for the layer on the Frankfurt server and try again. Info: Procon Frosbite V.15.1.1 Insane Limits - 0.9.17.0 Layer @ Fragnet is updated to latest version. Deleted Insanelimits from the layer (when layer Off) and reinstalled. Tried this myrcon.net/...insane-limits-bfhl#entry31005 Edit: Daniel L. @ Fragnet helped me with my problem. Here's what he said and tweaked. Chatt: Blackis: I can now see that the Layer server (after reinstalling Insanlimit) is version 1.5.1.2 and my Procon client is 1.5.1.1. Getting error message: [21:27:32 41] [insane Limits] Thread(settings): Version = 0.9.17.0 [21:27:51 91] [insane Limits] ERROR: unable to dump information to file [21:27:51 93] [insane Limits] EXCEPTION: System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. [21:29:32 41] [insane Limits] Thread(settings): ERROR: file InsaneLimits.conf does not exist Daniel L 1.5.1.2 is a special version built by us at Fragnet to meet a special set of needs from our clients. I have now made some more changes to your server, please try it out again. Blackis Now its working. So he installed a new version of Procon and gave me permission to modify the files. And now it works as it should again. Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 9, 2015 Author Share Posted October 9, 2015 Originally Posted by FoxRiverMan*: Hi: PaPa , I'm a dude from china and with poor english , I want to know how can i find Insane Limits - Examples thread. Coz the thread itself was 404-not-found . I want to set !votenuke and !votesurrender to my BF4 server, any examples that I can use for ? Thank You . Update: I was found it on Plugin Enhancements , Thx , nothing more . Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 10, 2015 Author Share Posted October 10, 2015 Originally Posted by crookbond*: Why Insane Limits Examples Page is giving 404? Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 12, 2015 Author Share Posted October 12, 2015 Originally Posted by LCARSx64*: Why Insane Limits Examples Page is giving 404?It's working fine for me, are you sure you're using the correct link? myrcon.net/.../insane-limits-examples Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 13, 2015 Author Share Posted October 13, 2015 Originally Posted by Tobsen03*: I want to have a code to display the time ( GMP Europe ) every 50 sec. Can you help me Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 13, 2015 Author Share Posted October 13, 2015 Originally Posted by LCARSx64*: I want to have a code to display the time ( GMP Europe ) every 50 sec. Can you help me Requests need to be made in the Insane Limits Requests thread: myrcon.net/.../insane-limits-requests Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 18, 2015 Author Share Posted October 18, 2015 Originally Posted by rimmy*: Hi I am using this plugin for BF4 and I've got some issue with compilation. When I use compilation, I got these errors:- Code: [Insane Limits] Thread(settings): ERROR: 1 error compiling Code [Insane Limits] Thread(settings): ERROR: (CS0006, line: 0, column: 0): Metadata file 'Plugins/BF3/InsaneLimits.dll' could not be found Quote * Restored post. It could be that the author is no longer active. Link to comment
ImportBot Posted October 21, 2015 Author Share Posted October 21, 2015 Originally Posted by Jay80_NL*: After an update insane limits was gone. I redid it and it worked. This morning i had to accept something again and after that it was gone again. Redid all the limits, but now i don`t seem to get it enabled. It is enabled, but it doesn`t show in the limit title tab.... Is it our side or maybe the host? We host at Fragnet Amsterdam...... Quote * Restored post. It could be that the author is no longer active. Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.