Jump to content

Ultimate Map Manager (1.2.5.0 - 03/26/15)


Prophet731

Recommended Posts

Originally Posted by stufz*:

 

  ReD-Dragon* said:

Another problem...

ProCon on our layer server won't start when the UMM is in the plug ins.

It sounds like the problem I have with my procon layer provider. I have to up the plugin as a zip file and then unzip it in the control panel. Otherwise, the plugin is not seen.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by dyn*:

 

I've requested this previously but didn't hear a positive or negative about it so I will do a double post. Don't hate!

 

One area that I think can be improved upon is if it were possible for UMM to recognize that a blaze disconnect happened and then to hold the current map list for several minutes.

 

What's happening is this: We get hit with a blaze disconnect and everyone drops. UMM sees the server now has population zero so it runs a different map list. However, while this is all happening the people who dropped are furiously hitting 'reconnect' and trying to get back in. They start to re-connect and see that it's now on a totally different map and quite possibly a different game mode causing them to just quit out.

 

I've made a work around in that if we get hit with a blaze disconnect during the day, the default map list which loads is our normal rotation which everyone expects. Then during the night -- off prime time -- it goes to our starter rotation.

 

If it were possible to recognize a blaze disconnect and then NOT change the map list that would help our servers quite a bit. If you'd consider adding it we'd consider donating some more cash your way! :P :P :P

 

Thoughts on this?

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

It's possible. I just don't have enough experience with blaze disconnects to know how to program a routine to detect them. If you could provide adequate logs (as described here: showthread....a-plugin-issue*) for a couple of said events, I may be able to work something out.

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

  EmporoS* said:

Hi falcontx,

 

today I made a new map list for CTF only so I´d like to know if there is allready a way to change the number of tickets?

You can use a different plugin like Adaptive Ticket Count, or you can create a custom preset and use the vars.gameModeCounter command.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

  darkcloud784* said:

Any information about an update for End Game map list support? Also do people that paid over $5 get access to this update or do we have to re-submit another payment?

There's no need for an update to the plugin. You just need to update your BF3.def file. Read about 15 posts up if you need help with that.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by EmporoS*:

 

thanks for the tip to set up CTF with vars.gameModeCounter over UMM but I can´t find the standard count settings on the internet and the link you gave me before with the overview of standard settings from all the maps is not being updated yet so maybe can you tell me what I need to set up to have only 6 Tickets for CTF rounds?

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

  EmporoS* said:

thanks for the tip to set up CTF with vars.gameModeCounter over UMM but I can´t find the standard count settings on the internet and the link you gave me before with the overview of standard settings from all the maps is not being updated yet so maybe can you tell me what I need to set up to have only 6 Tickets for CTF rounds?

Default for CTF is 3 tickets at 100%, so if you want 6 tickets, it needs to be 200%.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by kcuestag*:

 

Hello falcontx,

 

Is there any way I could move the whole map list up and down so I could keep them organized? :P

 

Edit:

 

Nevermind, I didn't realize until today that the maplist had an option to Move Up and Move Down! XD

* Restored post. It could be that the author is no longer active.
Link to comment
  • 2 weeks later...

Originally Posted by tarreltje*:

 

Falcon, is it posible to stick at the first map till a number of players is reached, but having like 5 maps on the map list? I want this so that the players can see which maps i have on the server!

 

Normaly i had 2 map lists, list 0 with 1 map for 0-10 players, map list 1 with 5 maps for 10-32 players. Problem is that the server starts with map list 0, so it shows only 1 map in the rotation.

 

It kinda like the empty map plugin but that plugin seems to be kinda bugged since endgame!

 

Lets say an list start: Stick with first map till player prefference is reached

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

  tarreltje* said:

Falcon, is it posible to stick at the first map till a number of players is reached, but having like 5 maps on the map list? I want this so that the players can see which maps i have on the server!

 

Normaly i had 2 map lists, list 0 with 1 map for 0-10 players, map list 1 with 5 maps for 10-32 players. Problem is that the server starts with map list 0, so it shows only 1 map in the rotation.

 

It kinda like the empty map plugin but that plugin seems to be kinda bugged since endgame!

 

Lets say an list start: Stick with first map till player prefference is reached

I haven't tried this, but it may work... Create a custom preset for the first map with the command "mapList.setNextMapIndex 0". This should reset the map index to 0 after every round, which seems to be what you want.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by tarreltje*:

 

  falcontx* said:

I haven't tried this, but it may work... Create a custom preset for the first map with the command "mapList.setNextMapIndex 0". This should reset the map index to 0 after every round, which seems to be what you want.

Im going to test it!
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by p4co86*:

 

when do i get the email ?

55C44033GB004490B

 

i have a problem. can`t see all game modes or all maps in the list.

I have also read the posts before. i have rented a server by gamed.de and the bf3.def is r38. what is the problem ? please help.

 

Thanks

 

 

Email received ! but problem is still there

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

  p4co86* said:

when do i get the email ?

55C44033GB004490B

 

i have a problem. can`t see all game modes or all maps in the list.

I have also read the posts before. i have rented a server by gamed.de and the bf3.def is r38. what is the problem ? please help.

 

Thanks

 

 

Email received ! but problem is still there

You need to be sure that the BF3.def file in the Configs folder on your layer server is up-to-date. The one on your local computer has no effect on your layer server. I suppose I should also note that the free version in the first post doesn't support DLC content, so be sure that you're using the version of UMM that was emailed to you (version 1.2.0.2).
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by staazvaind*:

 

  Quote

Known issues

Due to a server bug, if you have the plugin switch to a rotation that includes a Rush or Assault map while more than 32 players are online, all but 32 players will be kicked from the server. The same applies for map rotations including TDM maps with more than 24 players online, Squad Deathmatch maps with more than 16 players online, and Squad Rush maps with more than 8 players online. Ensure that your minimums and maximums are set up appropriately to avoid losing players!

can someone point me where to find more information on that issue?

thx

 

 

/edit:

 

i changed my procon-layer today and on the new one i had following setup:

 

0-25 players : tdm+sqdm

26-50 players : assault64+sqdm

 

both on strike at karkand.

 

on each switch it kicked to 32 players. i didnt have that issue on my other layer.

now i m curious and this thread is too long to find exact info (search didnt help me either).

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

  staazvaind* said:

can someone point me where to find more information on that issue?

thx

 

 

/edit:

 

i changed my procon-layer today and on the new one i had following setup:

 

0-25 players : tdm+sqdm

26-50 players : assault64+sqdm

 

both on strike at karkand.

 

on each switch it kicked to 32 players. i didnt have that issue on my other layer.

now i m curious and this thread is too long to find exact info (search didnt help me either).

That "known issue" was fixed long ago. So, I'm not sure why you're having problems. It's impossible to know without proper logs.
* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by Apex40000*:

 

Hi Falcontx

 

Just hoping you can confirm that I'm setting up UMM correctly

 

At the moment I have two maplist

 

first one

map changes straight awy if no more than 8

 

0-27 players TMDM

custom preset one 600% tickets

 

09-48 players CONQ mixed

custom preset two 167% ticket

 

But for some reason when TMDM changed over to maplist two it also transfer the custom preset also -- So I end up with CONQ games with 1800 + tickets e.g. 600% tickets

 

Any ideas why and if I'm doing anything wrong on the setup side ?

 

Can you tell me if Umm plugin clashes with any problems with other plugins as I'm using also

 

adaptive player plugin

insane limits --Clan leader board

metabans plugin

spam chat plugin

 

As the server is also getting stuck on random player slots (e.g. adaptive player changes the players slots normal no prob) But since I turn on UMM its been acting funny and idea's.

 

 

Many thanks

 

apex40000

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

Everything looks okay. As I've said many, many times before, it's impossible to diagnose problems without proper logs. Please refer to this thread: showthread....a-plugin-issue*

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by Apex40000*:

 

HI falcontx

 

Many Thanks for the quick respones-- I had a look at the link and it looks difficult to do -- But you answered the main question that I asked -e.g does this setup look ok ..

My server has been getting a lot of blazes and crashes of late so the ticket problem could just be this losing the connection from the server to procon plugins--

So I will test out differnet settings my end a little more before I go down: the how to properly report a plugin issue road.

 

Many thanks if I find any thing funny happening - I will past on my findings.

 

 

apex40000

 

 

  falcontx* said:

Everything looks okay. As I've said many, many times before, it's impossible to diagnose problems without proper logs. Please refer to this thread: showthread....a-plugin-issue*

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by D-Fens69*:

 

Hi falcontx

 

I need some help with the day/time based setting.

 

Actually we are running three maplists:

 

Maplist0 - Friday, Monday, Wednesday

Maplist1 - Saturday, Thursday

Maplist2 - Sunday, Tuesday

 

Time for switching the maplist should be at 5 a.m., but with the current setting the plugin switch at 0 a.m.!?

 

Time setting.png

 

Can you point whats wrong with the setting?

 

Thx, D-Fens69

* Restored post. It could be that the author is no longer active.
Link to comment

Originally Posted by falcontx*:

 

  D-Fens69* said:

Hi falcontx

 

I need some help with the day/time based setting.

 

Actually we are running three maplists:

 

Maplist0 - Friday, Monday, Wednesday

Maplist1 - Saturday, Thursday

Maplist2 - Sunday, Tuesday

 

Time for switching the maplist should be at 5 a.m., but with the current setting the plugin switch at 0 a.m.!?

 

Time setting.png

 

Can you point whats wrong with the setting?

 

Thx, D-Fens69

Day takes precedence over time. In other words, as soon as it's a new day, the map list will change (at 0:00). Within a given day (or adjacent days of the week), time could be use to change the map list again.
* Restored post. It could be that the author is no longer active.
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.