Jump to content

Ultimate Map Manager (1.2.5.0 - 03/26/15)


Prophet731

Recommended Posts

Originally Posted by moacco07*:

 

Hi EBassie,

 

my setting are the same as yours andtried again uploading the bf.def file into the layer service and restart procon, still nothing.

 

It shows the last mode implement squad obliteration.

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by 397Seth*:

 

Hi EBassie,

 

my setting are the same as yours andtried again uploading the bf.def file into the layer service and restart procon, still nothing.

 

It shows the last mode implement squad obliteration.

same here :-/
* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by EBassie*:

 

Hi EBassie,

 

my setting are the same as yours andtried again uploading the bf.def file into the layer service and restart procon, still nothing.

 

It shows the last mode implement squad obliteration.

same here :-/

I'm pretty confident you both don't have the latest BF4.def on your layer and / or Procon clients.

Try downloading this version from github and replace your current file:

 

https://raw.githubusercontent.com/My...onfigs/BF4.def

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by 397Seth*:

 

I'm pretty confident you both don't have the latest BF4.def on your layer and / or Procon clients.

Try downloading this version from github and replace your current file:

 

https://raw.githubusercontent.com/My...onfigs/BF4.def

I can add the gunmaster in the maplist, but not in UMM. I checked the def. It includes the gunmuster stuff.

Will replace still replace it

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by EBassie*:

 

checked them, they are identical :huh:

Just double checked on a fresh Procon install with latest BF4.def and UMM version 1.2.4.0 & 1.2.5.0

I see Gun Master maps...

 

You might want to remove (and backup) the plugin config file. Restart Procon and start a new maplist / reconfigure the plugin.

 

If you still don't see the Gun Master maps... well, then I have no clue what is wrong with your setup.

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by moacco07*:

 

Thanks, that's it. I have been using the old version and no wonder it wont show GM. haha, thank you for your help. Highly appreciate it.

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by J4RHEAD*:

 

Updated the defition file to R50.

After restarting layer, server and client a couple of times i finally saw Gunmaster in Game mode.

Now, how to change between different modes of Gunmaster?

 

0 - standard

1 - classic

2 - pistols

3 - dlc

4 - troll

?

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by EBassie*:

 

Updated the defition file to R50.

After restarting layer, server and client a couple of times i finally saw Gunmaster in Game mode.

Now, how to change between different modes of Gunmaster?

 

0 - standard

1 - classic

2 - pistols

3 - dlc

4 - troll

?

The answer to that question is here:

showthread....l=1#post122380*

 

Procon still needs an update to add this setting to the interface.

In the mean time you can do it via console.

 

There is also a neat limit to randomize Weapons Presets:

myrcon.net/.../insane-limits-bf4-gunmaster-random-presets

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by moacco07*:

 

You must be doing something wrong. I updated my layer via Tools -> Check for update.

It downloaded the new BF4.def

 

I restarted the layer and checked the plugin for Gun Master maps and they were there.

 

Also make sure this option is set when checking for updates:

 

Posted Image

Finally Gun Master appeared in the list after few days of madness. Thank you guys for the help. Appreciate it...
* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by steep100*:

 

Finally Gun Master appeared in the list after few days of madness. Thank you guys for the help. Appreciate it...

Maybe I don't understand something,but my GM mode did not appear in the settings

 

And another question:how to make so that for example both parties were US vs. US or RU vs. RU?

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by moacco07*:

 

Maybe I don't understand something,but my GM mode did not appear in the settings

 

And another question:how to make so that for example both parties were US vs. US or RU vs. RU?

Hello steep100,

 

I'll help you my friend.

 

first step.png

 

First step, ensure that in Procon options => Basic => include check for new game configs in update check (is ticked see photo above)

 

Second step.jpg

 

Second step, click update. See photo.

 

Step three.jpg

Step three 2.jpg

 

Step three, go to your procon file under configs folder => copy BF4.def file to your desktop.

 

Then go to your Procon layered service. For example i get my BF4 server and procon from Trinity games and there are also others such as Hypernia or Multiplay.

 

Go to Procon layered service, find File Manager => Configs => (First delete only BF4.def file and then upload the one from your desktop). Restart your Procon layered and it should be in the list.

 

Attached Files:

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by moacco07*:

 

And another question:how to make so that for example both parties were US vs. US or RU vs. RU?

This request, you may refer to this link: showthread....andom-Factions*
* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by steep100*:

 

This request, you may refer to this link: showthread....andom-Factions*

It's not quite what I need. I need to change the mode AS::

US vs. US

CH vs. CH

RU vs. RU

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by moacco07*:

 

It's not quite what I need. I need to change the mode AS::

US vs. US

CH vs. CH

RU vs. RU

Hello steep100,

 

It's there, have you read post #57 page 6? and it works with on all modes but not sure sqdm.

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by muhevana*:

 

Hello to all

 

My eng is not very good. But i have one question. When i want run rush maps and conquest maps in my server, how i can set to rush mode 200 tickets and when nxt map is coming conquest i want it run to 800 tickets. How and where i can set this settings? Im running first time server. and i dont have any experience.

 

Thank you to all.

* Restored post. It could be that the author is no longer active.
Link to post
  • 3 weeks later...

Originally Posted by GitSum*:

 

Is there a way to manually edit the "CUltimateMapManager.cfg"?

 

A couple of things - first I wanted to copy our existing map list settings to another server. There are only two map lists at this point. One contains 16 maps and the second contains 33 maps. After copying the .cfg file, when I open the plugin - it is missing the very first group of settings and the first map displayed in the list is [0] [16]. I have restarted/reloaded procon several times but it still appears something is corrupted. When I open the .cfg file in notepad++, everything appears to be fine - I can see the settings at the top of the list and all my maps are listed.

 

Secondly, I have tried manually editing the list to move some maps around - I find it easier to do it that way, but same thing - the maps are note properly listed when looking at them in the plugin

 

This is what I am talking about - first group of setttings and maps are missing:

 

umm.jpg

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by ColColonCleaner*:

 

Is there a way to manually edit the "CUltimateMapManager.cfg"?

 

A couple of things - first I wanted to copy our existing map list settings to another server. There are only two map lists at this point. One contains 16 maps and the second contains 33 maps. After copying the .cfg file, when I open the plugin - it is missing the very first group of settings and the first map displayed in the list is [0] [16]. I have restarted/reloaded procon several times but it still appears something is corrupted. When I open the .cfg file in notepad++, everything appears to be fine - I can see the settings at the top of the list and all my maps are listed.

 

Secondly, I have tried manually editing the list to move some maps around - I find it easier to do it that way, but same thing - the maps are note properly listed when looking at them in the plugin

 

This is what I am talking about - first group of setttings and maps are missing:

 

umm.jpg

Shut down your layer, edit the cfg, start your layer.
* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by falcontx*:

 

Is there a way to manually edit the "CUltimateMapManager.cfg"?

 

A couple of things - first I wanted to copy our existing map list settings to another server. There are only two map lists at this point. One contains 16 maps and the second contains 33 maps. After copying the .cfg file, when I open the plugin - it is missing the very first group of settings and the first map displayed in the list is [0] [16]. I have restarted/reloaded procon several times but it still appears something is corrupted. When I open the .cfg file in notepad++, everything appears to be fine - I can see the settings at the top of the list and all my maps are listed.

 

Secondly, I have tried manually editing the list to move some maps around - I find it easier to do it that way, but same thing - the maps are note properly listed when looking at them in the plugin

 

This is what I am talking about - first group of setttings and maps are missing:

 

Attachment 4015

You should be able to do this. My suspicion is that the BF4.def file on the second server is not up to date. Try manually adding a new map list and adding the first map on the list you're having problems with and see if it works.
* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by GitSum*:

 

Shut down your layer, edit the cfg, start your layer.

Trust me - I have done that several times now and something is screwing it up

 

You should be able to do this. My suspicion is that the BF4.def file on the second server is not up to date. Try manually adding a new map list and adding the first map on the list you're having problems with and see if it works.

I will give that a try, thanks
* Restored post. It could be that the author is no longer active.
Link to post
  • 3 weeks later...

Originally Posted by GitSum*:

 

Hardcore Infantry - showing Hardcore in Battlelog?

 

Is there a way to get the plugin to do that - I have played around with it a bit, but it always ends up showing as 'custom' in Battlelog

* Restored post. It could be that the author is no longer active.
Link to post
  • 3 weeks later...

Originally Posted by Chelrid*:

 

Hello steep100,

 

I'll help you my friend.

 

Attachment 3969

 

First step, ensure that in Procon options => Basic => include check for new game configs in update check (is ticked see photo above)

 

Attachment 3970

 

Second step, click update. See photo.

 

Attachment 3971

Attachment 3972

 

Step three, go to your procon file under configs folder => copy BF4.def file to your desktop.

 

Then go to your Procon layered service. For example i get my BF4 server and procon from Trinity games and there are also others such as Hypernia or Multiplay.

 

Go to Procon layered service, find File Manager => Configs => (First delete only BF4.def file and then upload the one from your desktop). Restart your Procon layered and it should be in the list.

Hello, my UMM shows me Gunmaster not in the list. Server and Layer are hosted at Nitrado. Procon client is up to date. And your instructions not help. In the Maplist he shows me to Gunmaster however.
* Restored post. It could be that the author is no longer active.
Link to post
  • 4 weeks later...

Originally Posted by EntraVenuS*:

 

Hey hey and good morning.

 

I tryed greate today new maplist and i dont see graveyard map in ultimate mapmanager list.

i updated my bf4.def file and i can see the new map in UMM is your bf4.def updated to the latest ?
* Restored post. It could be that the author is no longer active.
Link to post
  • 4 weeks later...

Originally Posted by muhevana*:

 

Is this any option set a limits to hardcore. Can i disable vehicle spawn somehow? only atv to transport players. I want set infantry mode some maps.

I used this command custom hardcore settings vars.vehicleSpawnAllowed false--- but its not working or i make something wrong?

* Restored post. It could be that the author is no longer active.
Link to post

Originally Posted by Porezowy*:

 

Hi,

I got one question - is it possible to set same ticket number for different game modes (CQL, CQS) via this plugin?

I want to set 800tickets for both.

Adaptive ticket count plugin doesn't work all the time.

If not - can anyone help me find solution with my problem?

* Restored post. It could be that the author is no longer active.
Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Game Server Hosting:

      We're happy to announce that EZRCON will branch out into the game server provider scene. This is a big step for us so please having patience if something doesn't go right in this area. Now, what makes us different compared to other providers? Well, we're going with the idea of having a scaleable server hosting and providing more control in how you set up your server. For example, in Minecraft, you have the ability to control how many CPU cores you wish your server to have access to, how much RAM you want to use, how much disk space you want to use. This type of control can't be offered in a single service package so you're able to configure a custom package the way you want it.

      You can see all the available games here. Currently, we have the following games available.

      Valheim (From $1.50 USD)


      Rust (From $3.20 USD)


      Minecraft (Basic) (From $4.00 USD)


      Call of Duty 4X (From $7.00 USD)


      OpenTTD (From $4.00 USD)


      Squad (From $9.00 USD)


      Insurgency: Sandstorm (From $6.40 USD)


      Changes to US-East:

      Starting in January 2022, we will be moving to a different provider that has better support, better infrastructure, and better connectivity. We've noticed that the connection/routes to this location are not ideal and it's been hard getting support to correct this. Our contract for our two servers ends in March/April respectively. If you currently have servers in this location you will be migrated over to the new provider. We'll have more details when the time comes closer to January. The new location for this change will be based out of Atlanta, GA. If you have any questions/concerns please open a ticket and we'll do our best to answer them.
      • 5 replies
    • Hello All,

      I wanted to give an update to how EZRCON is doing. As of today we have 56 active customers using the services offered. I'm glad its doing so well and it hasn't been 1 year yet. To those that have services with EZRCON, I hope the service is doing well and if not please let us know so that we can improve it where possible. We've done quite a few changes behind the scenes to improve the performance hopefully. 

      We'll be launching a new location for hosting procon layers in either Los Angeles, USA or Chicago, IL. Still being decided on where the placement should be but these two locations are not set in stone yet. We would like to get feedback on where we should have a new location for hosting the Procon Layers, which you can do by replying to this topic. A poll will be created where people can vote on which location they would like to see.

      We're also looking for some suggestions on what else you would like to see for hosting provider options. So please let us know your thoughts on this matter.
      • 4 replies
    • Added ability to disable the new API check for player country info


      Updated GeoIP database file


      Removed usage sending stats


      Added EZRCON ad banner



      If you are upgrading then you may need to add these two lines to your existing installation in the file procon.cfg. To enable these options just change False to True.

      procon.private.options.UseGeoIpFileOnly False
      procon.private.options.BlockRssFeedNews False



       
      • 2 replies
    • I wanted I let you know that I am starting to build out the foundation for the hosting services that I talked about here. The pricing model I was originally going for wasn't going to be suitable for how I want to build it. So instead I decided to offer each service as it's own product instead of a package deal. In the future, hopefully, I will be able to do this and offer discounts to those that choose it.

      Here is how the pricing is laid out for each service as well as information about each. This is as of 7/12/2020.

      Single MySQL database (up to 30 GB) is $10 USD per month.



      If you go over the 30 GB usage for the database then each additional gigabyte is charged at $0.10 USD each billing cycle. If you're under 30GB you don't need to worry about this.


      Databases are replicated across 3 zones (regions) for redundancy. One (1) on the east coast of the USA, One (1) in Frankfurt, and One (1) in Singapore. Depending on the demand, this would grow to more regions.


      Databases will also be backed up daily and retained for 7 days.




      Procon Layer will be $2 USD per month.


      Each layer will only allow one (1) game server connection. The reason behind this is for performance.


      Each layer will also come with all available plugins installed by default. This is to help facilitate faster deployments and get you up and running quickly.


      Each layer will automatically restart if Procon crashes. 


      Each layer will also automatically restart daily at midnight to make sure it stays in tip-top shape.


      Custom plugins can be installed by submitting a support ticket.




      Battlefield Admin Control Panel (BFACP) will be $5 USD per month


      As I am still working on building version 3 of the software, I will be installing the last version I did. Once I complete version 3 it will automatically be upgraded for you.





      All these services will be managed by me so you don't have to worry about the technical side of things to get up and going.

      If you would like to see how much it would cost for the services, I made a calculator that you can use. It can be found here https://ezrcon.com/calculator.html

       
      • 11 replies
    • I have pushed out a new minor release which updates the geodata pull (flags in the playerlisting). This should be way more accurate now. As always, please let me know if any problems show up.

       
      • 9 replies
×
×
  • Create New...

Important Information

Please review our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.