Advanced In-Game Admin and Ban Enforcer - AdKats

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

[17:04:23 29] [AdKats] ERROR-75013: [Round ID was invalid when starting challenge manager.]

Okay perfect. There was an issue with round IDs not going up from zero. Now you just need to complete a single round. Join your server and spawn, then manually end the round via a command/procon. After the next round loads look in the server setting section at the top of AdKats for the 'server round (display)' setting. This should go from 0 to 1 after you do this (might need a refresh). After the round number is above zero challenges should function normally.

[ImportBot]

Originally Posted by D00medT0Fail*:

 

Okay perfect. There was an issue with round IDs not going up from zero. Now you just need to complete a single round. Join your server and spawn, then manually end the round via a command/procon. After the next round loads look in the server setting section at the top of AdKats for the 'server round (display)' setting. This should go from 0 to 1 after you do this (might need a refresh). After the round number is above zero challenges should function normally.

Did all that, I now have a round ID of 1. But still the same issue with the same error code is there. I tried restarting procon, and my restarting the layer to see if it fixes the issue with no luck. The rules section still isn't appearing either. I apologise for how annoying this might be, I'm not sure if I've done something wrong, or it's just g-portals layer having issues.

 

EDIT #1. This is another warning I get. [17:30:05 40] [AdKats] WARNING: Attempted to start playing challenge round when not in loaded state.

 

EDIT #2. So, after playing around with it, I deleted my definitions completely and the rewards. The rule section has appeared.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Did all that, I now have a round ID of 1. But still the same issue with the same error code is there. I tried restarting procon, and my restarting the layer to see if it fixes the issue with no luck. The rules section still isn't appearing either. I apologise for how annoying this might be, I'm not sure if I've done something wrong, or it's just g-portals layer having issues.

 

EDIT #1. This is another warning I get. [17:30:05 40] [AdKats] WARNING: Attempted to start playing challenge round when not in loaded state.

 

EDIT #2. So, after playing around with it, I deleted my definitions completely and the rewards. The rule section has appeared.

Okay glad you can see the rules section again, if it disappears once you start adding definitions and such again let me know.

 

As for the state management, i'll have to take a look at that after work. If you want to PM me creds for your procon layer I could look at it more closely and find a solution faster.

[ImportBot]

Originally Posted by D00medT0Fail*:

 

Okay glad you can see the rules section again, if it disappears once you start adding definitions and such again let me know.

 

As for the state management, i'll have to take a look at that after work. If you want to PM me creds for your procon layer I could look at it more closely and find a solution faster.

So, for whatever reason it's now all sorted. After another round finished, it sorted it self out. Round ID is 2. challenges are working as intended. Thank you for your help.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

So, for whatever reason it's now all sorted. After another round finished, it sorted it self out. Round ID is 2. challenges are working as intended. Thank you for your help.

Okay great! Glad that's sorted. Guess i had it set up to only enable when round ID was greater than 1.

[ImportBot]

Originally Posted by sixpax12*:

 

thoughts ?

 

[19:14:24 95] [AdKats] EXCEPTION-7500-A0.39-GetDamageTypeByWeaponCode-KillProcessing40: [No matching weapon in dictionary for XP2/Gameplay/Vehicles/Harpoon/HarpoonLauncher_State1 when fetching damage type.]

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

thoughts ?

 

[19:14:24 95] [AdKats] EXCEPTION-7500-A0.39-GetDamageTypeByWeaponCode-KillProcessing40: [No matching weapon in dictionary for XP2/Gameplay/Vehicles/Harpoon/HarpoonLauncher_State1 when fetching damage type.]

Ah, i haven't updated DLC weapons in a while. Are you seeing a lot of kills with that harpoon launcher? If so i'll need to do some research about that weapon to see what it is.

[ImportBot]

Originally Posted by sixpax12*:

 

getting alot of these today ...

 

[18:06:09 86] [AdKats] ERROR-75013: [Error processing battlelog stats for XXXXXXX. Stats response did not contain vehicle stats data.]

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

getting alot of these today ...

 

[18:06:09 86] [AdKats] ERROR-75013: [Error processing battlelog stats for XXXXXXX. Stats response did not contain vehicle stats data.]

Sounds like a battlelog issue. That should only effect the anti-cheat for vehicles. Shouldn't cause any other issues. If it continues for more than a few days let me know and i'll see what they changed about battlelog's requests.

[ImportBot]

Originally Posted by OneManArmy*:

 

I got this (BF4):

ERROR-75013: [Failed to fetch weapon stat definitions. AdKats cannot be started.]

much:

[10:27:45 23] [AdKats] WARNING: Threads still exiting: Enabler[11]

and adkats stops:

[10:28:05 76] [AdKats] AdKats 7.5.0.13 Disabled! =(

 

 

AdKats - Advanced In-Game Admin - 7.5.0.13

[ImportBot]

Originally Posted by OneManArmy*:

 

Might have something to do with this_:

Amazon is having serious problems with abuse, and we are seeing intermittent multi-100-Gbps attacks from compromised and fraudulently rented cloud instances at Amazon against certain customers in Frankfurt. These attacks flood out our upstream links to INAP, causing few-second-long spurts of packet loss for customers (as the emergency null-route against the target takes hold).

 

We are waiting for Amazon to address the sources of traffic, and for them to implement better systems for preventing or automatically detecting outbound attacks, as some other cloud hosting providers have (they could have such measures in place within a matter of hours if they had one of their engineers work on it). We always send an immediate notification to Amazon about every traffic source.

[ImportBot]

Originally Posted by OneManArmy*:

 

think its an IP issue. if i moved it over to my PC at home it starts fine.

 

maybe too much requests to battlelog from 1 IP. (i have 8 separate layers for Adkats but at the same VPS

[ImportBot]

Originally Posted by OneManArmy*:

 

the only error i get now is:

[11:53:48 82] [AdKats] ERROR-75013: [unable to download SQL updates.]

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

the only error i get now is:

[11:53:48 82] [AdKats] ERROR-75013: [unable to download SQL updates.]

Those are errors because the plugin cannot connect to github's servers. Try going here:

 

https://raw.githubusercontent.com/Ad...ter/adkats.sql

https://raw.githubusercontent.com/Ad...aponstats.json

 

They works for me, but might not be working from your layer's point of view.

[ImportBot]

Originally Posted by payver*:

 

Hi ColColonCleaner,

i decided to use this plugin, because maybe the big banlist causes problems. I ran into the phpmyadmin problem you described in the installation guide, but didn't know how to reverse, i'm not anymore familiar with the SQL topic.

So i used workbench and i got this error:

 

REPLACE INTO `adkats_commands` VALUES(144, 'Invisible', 'player_challenge_complete', 'Log', 'Player Completed Challenge', 'challengecomplete', TRUE, 'Any') DROP TABLE IF EXISTS `adkats_infractions_global`

Error Code: 1064. You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DROP TABLE IF EXISTS `adkats_infractions_global`' at line 3

 

I looked for the serverversion: Gentoo Linux mysql-5.6.40-r2

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Hi ColColonCleaner,

i decided to use this plugin, because maybe the big banlist causes problems. I ran into the phpmyadmin problem you described in the installation guide, but didn't know how to reverse, i'm not anymore familiar with the SQL topic.

So i used workbench and i got this error:

 

REPLACE INTO `adkats_commands` VALUES(144, 'Invisible', 'player_challenge_complete', 'Log', 'Player Completed Challenge', 'challengecomplete', TRUE, 'Any') DROP TABLE IF EXISTS `adkats_infractions_global`

Error Code: 1064. You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DROP TABLE IF EXISTS `adkats_infractions_global`' at line 3

 

I looked for the serverversion: Gentoo Linux mysql-5.6.40-r2

There shouldn't be anything wrong with that syntax when run through workbench, it hasn't been changed in a very long time. Perhaps try pasting the contents of the adkats.sql script into workbench and running it all that way instead of just trying to run the file? If that fails you could PM me creds to your database and I could check it out.

[ImportBot]

Originally Posted by OneManArmy*:

 

Those are errors because the plugin cannot connect to github's servers. Try going here:

 

https://raw.githubusercontent.com/Ad...ter/adkats.sql

https://raw.githubusercontent.com/Ad...aponstats.json

 

They works for me, but might not be working from your layer's point of view.

that worked. but i changed DNS routing from 8.8.8.8 to 1.1.1.1 at the server were it is running and all starts normal now.

but i keep yours in mind

 

More is working strange the last days. think google DNS also has some issues.

[ImportBot]

Originally Posted by payver*:

 

There shouldn't be anything wrong with that syntax when run through workbench, it hasn't been changed in a very long time. Perhaps try pasting the contents of the adkats.sql script into workbench and running it all that way instead of just trying to run the file? If that fails you could PM me creds to your database and I could check it out.

I get the same error. I copied the text, changed "Limit to 1000 rows" to "Don't Limit", turned off "Toggle autocommit mode.". I don't know what to do.

 

I also again deactivated statslogger and turned off the Procon layer before doing actions in SQL.

 

Before that error there is this line:

DROP TRIGGER IF EXISTS `tbl_chatlog_player_id_insert` 0 row(s) affected, 1 warning(s): 1360 Trigger does not exist

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

I get the same error. I copied the text, changed "Limit to 1000 rows" to "Don't Limit", turned off "Toggle autocommit mode.". I don't know what to do.

 

I also again deactivated statslogger and turned off the Procon layer before doing actions in SQL.

Keep auto-commit on, you'll need that, but that's another story.

 

Please PM me database creds and I'll look it over.

[ImportBot]

Originally Posted by payver*:

 

Keep auto-commit on, you'll need that, but that's another story.

 

Please PM me database creds and I'll look it over.

I guess a ";" was missing at line 284 in the adkats.sql, i added it.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

I guess a ";" was missing at line 284 in the adkats.sql, i added it.

Ah, you're on an older version of that file. I fixed that issue about 6 months ago in this commit: https://github.com/AdKats/AdKats/com...24695f8ed05cd9

 

Here is the latest version of that file: https://raw.githubusercontent.com/Ad...ter/adkats.sql

[ImportBot]

Originally Posted by payver*:

 

Ah, you're on an older version of that file. I fixed that issue about 6 months ago in this commit: https://github.com/AdKats/AdKats/com...24695f8ed05cd9

 

Here is the latest version of that file: https://raw.githubusercontent.com/Ad...ter/adkats.sql

I downloaded that file from the link in the instruction guide.

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

I downloaded that file from the link in the instruction guide.

Ah, i never updated the version on sourceforge, just github. So if you downloaded the archive and are running the file from there it wouldn't be updated. I'll get that changed.

[ImportBot]

Originally Posted by payver*:

 

Ah, i never updated the version on sourceforge, just github. So if you downloaded the archive and are running the file from there it wouldn't be updated. I'll get that changed.

No, it was from githubs readme.md.

[ImportBot]

Originally Posted by leibhold*:

 

No, it was from githubs readme.md.

So have you now loaded the file ?

 

https://github.com/AdKats/AdKats/com...24695f8ed05cd9

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Not sure how he recently grabbed a file that was 6 months old, maybe a caching issue on github's side? no idea.

 

Latest version of the script: https://raw.githubusercontent.com/Ad...ter/adkats.sql

[ImportBot]

Originally Posted by xloneshadowx*:

 

Hey Col. anyway of adding weekly and monthly challenges. I'm thinking most kills in a week or a month & most hours spent in the server in a week or month. is that something that could be put in challenge system or should i look somewhere else for that.. think i may have asked this in a way befores not sure

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Hey Col. anyway of adding weekly and monthly challenges. I'm thinking most kills in a week or a month & most hours spent in the server in a week or month. is that something that could be put in challenge system or should i look somewhere else for that.. think i may have asked this in a way befores not sure

There isn't any system currently comparing challenges between each other, so having players compete for the challenges against each other isn't a thing. Right now I do not have the time to add features, but I might in the future if i get access to a server again.

[ImportBot]

Originally Posted by xloneshadowx*:

 

Col. Can you explain about this discord feature I really like the idea but half the time it doesn't seem to work. Both their discord and in-game name must match? If not I can maunally do it by using /discordlink playername discordname correct? I try to do it that way but most times it just says no discord player found. Also so they have to be showing up as on-line in discord

[ColColonCleaner]

Originally Posted by ColColonCleaner*:

 

Col. Can you explain about this discord feature I really like the idea but half the time it doesn't seem to work. Both their discord and in-game name must match? If not I can maunally do it by using /discordlink playername discordname correct? I try to do it that way but most times it just says no discord player found. Also so they have to be showing up as on-line in discord

Because procon is stuck on .NET 3.5 for official releases (or at least it was before a 3rd party made an upgraded version, which we haven't brought into full release yet) i can't use websockets, and websockets are required for discord interaction.

To get around this I make use of each server's widget.json file, which gets updated at 5 minute intervals and can be fetched from anywhere. This means it can take up to 5 minutes for a player to appear as loaded into discord. It's an unfortunate setback but one that i couldn't work around at the time.

 

Just wait a few minutes after someone is in discord and they should appear in the list.